/********************************** (C) COPYRIGHT *******************************
* File Name : ch32l103_tim.h
* Author : WCH
* Version : V1.0.0
* Date : 2023/07/08
* Description : This file contains all the functions prototypes for the
* TIM firmware library.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#ifndef __CH32L103_TIM_H
#define __CH32L103_TIM_H
#ifdef __cplusplus
extern "C" {
#endif
#include "ch32l103.h"
/* TIM Time Base Init structure definition */
typedef struct
{
uint32_t TIM_Period; /* Specifies the period value to be loaded into the active
Auto-Reload Register at the next update event.
This parameter must be a number between 0x0000 and 0xFFFF for TIM1-TIM2-TIM3.
This parameter must be a number between 0x00000000 and 0xFFFFFFFF for TIM4. */
uint16_t TIM_Prescaler; /* Specifies the prescaler value used to divide the TIM clock.
This parameter can be a number between 0x0000 and 0xFFFF */
uint16_t TIM_CounterMode; /* Specifies the counter mode.
This parameter can be a value of @ref TIM_Counter_Mode */
uint16_t TIM_ClockDivision; /* Specifies the clock division.
This parameter can be a value of @ref TIM_Clock_Division_CKD */
uint8_t TIM_RepetitionCounter; /* Specifies the repetition counter value. Each time the RCR downcounter
reaches zero, an update event is generated and counting restarts
from the RCR value (N).
This means in PWM mode that (N+1) corresponds to:
- the number of PWM periods in edge-aligned mode
- the number of half PWM period in center-aligned mode
This parameter must be a number between 0x00 and 0xFF.
@note This parameter is valid only for TIM1 and TIM8. */
} TIM_TimeBaseInitTypeDef;
/* TIM Output Compare Init structure definition */
typedef struct
{
uint32_t TIM_Pulse; /* Specifies the pulse value to be loaded into the Capture Compare Register.
This parameter can be a number between 0x0000 and 0xFFFF for TIM1-TIM2-TIM3.
This parameter must be a number between 0x00000000 and 0xFFFFFFFF for TIM4. */
uint16_t TIM_OCMode; /* Specifies the TIM mode.
This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
uint16_t TIM_OutputState; /* Specifies the TIM Output Compare state.
This parameter can be a value of @ref TIM_Output_Compare_state */
uint16_t TIM_OutputNState; /* Specifies the TIM complementary Output Compare state.
This parameter can be a value of @ref TIM_Output_Compare_N_state
@note This parameter is valid only for TIM1 and TIM8. */
uint16_t TIM_OCPolarity; /* Specifies the output polarity.
This parameter can be a value of @ref TIM_Output_Compare_Polarity */
uint16_t TIM_OCNPolarity; /* Specifies the complementary output polarity.
This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
@note This parameter is valid only for TIM1 and TIM8. */
uint16_t TIM_OCIdleState; /* Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_Output_Compare_Idle_State
@note This parameter is valid only for TIM1 and TIM8. */
uint16_t TIM_OCNIdleState; /* Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
@note This parameter is valid only for TIM1 and TIM8. */
} TIM_OCInitTypeDef;
/* TIM Input Capture Init structure definition */
typedef struct
{
uint16_t TIM_Channel; /* Specifies the TIM channel.
This parameter can be a value of @ref TIM_Channel */
uint16_t TIM_ICPolarity; /* Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
uint16_t TIM_ICSelection; /* Specifies the input.
This parameter can be a value of @ref TIM_Input_Capture_Selection */
uint16_t TIM_ICPrescaler; /* Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
uint16_t TIM_ICFilter; /* Specifies the input capture filter.
This parameter can be a number between 0x0 and 0xF */
} TIM_ICInitTypeDef;
/* BDTR structure definition */
typedef struct
{
uint16_t TIM_OSSRState; /* Specifies the Off-State selection used in Run mode.
This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */
uint16_t TIM_OSSIState; /* Specifies the Off-State used in Idle state.
This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */
uint16_t TIM_LOCKLevel; /* Specifies the LOCK level parameters.
This parameter can be a value of @ref Lock_level */
uint16_t TIM_DeadTime; /* Specifies the delay time between the switching-off and the
switching-on of the outputs.
This parameter can be a number between 0x00 and 0xFF */
uint16_t TIM_Break; /* Specifies whether the TIM Break input is enabled or not.
This parameter can be a value of @ref Break_Input_enable_disable */
uint16_t TIM_BreakPolarity; /* Specifies the TIM Break Input pin polarity.
This parameter can be a value of @ref Break_Polarity */
uint16_t TIM_AutomaticOutput; /* Specifies whether the TIM Automatic Output feature is enabled or not.
This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
} TIM_BDTRInitTypeDef;
/* TIM_Output_Compare_and_PWM_modes */
#define TIM_OCMode_Timing ((uint16_t)0x0000)
#define TIM_OCMode_Active ((uint16_t)0x0010)
#define TIM_OCMode_Inactive ((uint16_t)0x0020)
#define TIM_OCMode_Toggle ((uint16_t)0x0030)
#define TIM_OCMode_PWM1 ((uint16_t)0x0060)
#define TIM_OCMode_PWM2 ((uint16_t)0x0070)
/* TIM_One_Pulse_Mode */
#define TIM_OPMode_Single ((uint16_t)0x0008)
#define TIM_OPMode_Repetitive ((uint16_t)0x0000)
/* TIM_Channel */
#define TIM_Channel_1 ((uint16_t)0x0000)
#define TIM_Channel_2 ((uint16_t)0x0004)
#define TIM_Channel_3 ((uint16_t)0x0008)
#define TIM_Channel_4 ((uint16_t)0x000C)
/* TIM_Clock_Division_CKD */
#define TIM_CKD_DIV1 ((uint16_t)0x0000)
#define TIM_CKD_DIV2 ((uint16_t)0x0100)
#define TIM_CKD_DIV4 ((uint16_t)0x0200)
/* TIM_Counter_Mode */
#define TIM_CounterMode_Up ((uint16_t)0x0000)
#define TIM_CounterMode_Down ((uint16_t)0x0010)
#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020)
#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040)
#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060)
/* TIM_Output_Compare_Polarity */
#define TIM_OCPolarity_High ((uint16_t)0x0000)
#define TIM_OCPolarity_Low ((uint16_t)0x0002)
/* TIM_Output_Compare_N_Polarity */
#define TIM_OCNPolarity_High ((uint16_t)0x0000)
#define TIM_OCNPolarity_Low ((uint16_t)0x0008)
/* TIM_Output_Compare_state */
#define TIM_OutputState_Disable ((uint16_t)0x0000)
#define TIM_OutputState_Enable ((uint16_t)0x0001)
/* TIM_Output_Compare_N_state */
#define TIM_OutputNState_Disable ((uint16_t)0x0000)
#define TIM_OutputNState_Enable ((uint16_t)0x0004)
/* TIM_Capture_Compare_state */
#define TIM_CCx_Enable ((uint16_t)0x0001)
#define TIM_CCx_Disable ((uint16_t)0x0000)
/* TIM_Capture_Compare_N_state */
#define TIM_CCxN_Enable ((uint16_t)0x0004)
#define TIM_CCxN_Disable ((uint16_t)0x0000)
/* Break_Input_enable_disable */
#define TIM_Break_Enable ((uint16_t)0x1000)
#define TIM_Break_Disable ((uint16_t)0x0000)
/* Break_Polarity */
#define TIM_BreakPolarity_Low ((uint16_t)0x0000)
#define TIM_BreakPolarity_High ((uint16_t)0x2000)
/* TIM_AOE_Bit_Set_Reset */
#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000)
#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000)
/* Lock_level */
#define TIM_LOCKLevel_OFF ((uint16_t)0x0000)
#define TIM_LOCKLevel_1 ((uint16_t)0x0100)
#define TIM_LOCKLevel_2 ((uint16_t)0x0200)
#define TIM_LOCKLevel_3 ((uint16_t)0x0300)
/* OSSI_Off_State_Selection_for_Idle_mode_state */
#define TIM_OSSIState_Enable ((uint16_t)0x0400)
#define TIM_OSSIState_Disable ((uint16_t)0x0000)
/* OSSR_Off_State_Selection_for_Run_mode_state */
#define TIM_OSSRState_Enable ((uint16_t)0x0800)
#define TIM_OSSRState_Disable ((uint16_t)0x0000)
/* TIM_Output_Compare_Idle_State */
#define TIM_OCIdleState_Set ((uint16_t)0x0100)
#define TIM_OCIdleState_Reset ((uint16_t)0x0000)
/* TIM_Output_Compare_N_Idle_State */
#define TIM_OCNIdleState_Set ((uint16_t)0x0200)
#define TIM_OCNIdleState_Reset ((uint16_t)0x0000)
/* TIM_Input_Capture_Polarity */
#define TIM_ICPolarity_Rising ((uint16_t)0x0000)
#define TIM_ICPolarity_Falling ((uint16_t)0x0002)
#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A)
/* TIM_Input_Capture_Selection */
#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /* TIM Input 1, 2, 3 or 4 is selected to be \
connected to IC1, IC2, IC3 or IC4, respectively */
#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /* TIM Input 1, 2, 3 or 4 is selected to be \
connected to IC2, IC1, IC4 or IC3, respectively. */
#define TIM_ICSelection_TRC ((uint16_t)0x0003) /* TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */
/* TIM_Input_Capture_Prescaler */
#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /* Capture performed each time an edge is detected on the capture input. */
#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /* Capture performed once every 2 events. */
#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /* Capture performed once every 4 events. */
#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /* Capture performed once every 8 events. */
/* TIM_interrupt_sources */
#define TIM_IT_Update ((uint16_t)0x0001)
#define TIM_IT_CC1 ((uint16_t)0x0002)
#define TIM_IT_CC2 ((uint16_t)0x0004)
#define TIM_IT_CC3 ((uint16_t)0x0008)
#define TIM_IT_CC4 ((uint16_t)0x0010)
#define TIM_IT_COM ((uint16_t)0x0020)
#define TIM_IT_Trigger ((uint16_t)0x0040)
#define TIM_IT_Break ((uint16_t)0x0080)
/* TIM_DMA_Base_address */
#define TIM_DMABase_CR1 ((uint16_t)0x0000)
#define TIM_DMABase_CR2 ((uint16_t)0x0001)
#define TIM_DMABase_SMCR ((uint16_t)0x0002)
#define TIM_DMABase_DIER ((uint16_t)0x0003)
#define TIM_DMABase_SR ((uint16_t)0x0004)
#define TIM_DMABase_EGR ((uint16_t)0x0005)
#define TIM_DMABase_CCMR1 ((uint16_t)0x0006)
#define TIM_DMABase_CCMR2 ((uint16_t)0x0007)
#define TIM_DMABase_CCER ((uint16_t)0x0008)
#define TIM_DMABase_CNT ((uint16_t)0x0009)
#define TIM_DMABase_PSC ((uint16_t)0x000A)
#define TIM_DMABase_ARR ((uint16_t)0x000B)
#define TIM_DMABase_RCR ((uint16_t)0x000C)
#define TIM_DMABase_CCR1 ((uint16_t)0x000D)
#define TIM_DMABase_CCR2 ((uint16_t)0x000E)
#define TIM_DMABase_CCR3 ((uint16_t)0x000F)
#define TIM_DMABase_CCR4 ((uint16_t)0x0010)
#define TIM_DMABase_BDTR ((uint16_t)0x0011)
#define TIM_DMABase_DCR ((uint16_t)0x0012)
/* TIM_DMA_Burst_Length */
#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
/* TIM_DMA_sources */
#define TIM_DMA_Update ((uint16_t)0x0100)
#define TIM_DMA_CC1 ((uint16_t)0x0200)
#define TIM_DMA_CC2 ((uint16_t)0x0400)
#define TIM_DMA_CC3 ((uint16_t)0x0800)
#define TIM_DMA_CC4 ((uint16_t)0x1000)
#define TIM_DMA_COM ((uint16_t)0x2000)
#define TIM_DMA_Trigger ((uint16_t)0x4000)
/* TIM_External_Trigger_Prescaler */
#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000)
#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000)
#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000)
#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000)
/* TIM_Internal_Trigger_Selection */
#define TIM_TS_ITR0 ((uint16_t)0x0000)
#define TIM_TS_ITR1 ((uint16_t)0x0010)
#define TIM_TS_ITR2 ((uint16_t)0x0020)
#define TIM_TS_ITR3 ((uint16_t)0x0030)
#define TIM_TS_TI1F_ED ((uint16_t)0x0040)
#define TIM_TS_TI1FP1 ((uint16_t)0x0050)
#define TIM_TS_TI2FP2 ((uint16_t)0x0060)
#define TIM_TS_ETRF ((uint16_t)0x0070)
/* TIM_TIx_External_Clock_Source */
#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050)
#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060)
#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040)
/* TIM_External_Trigger_Polarity */
#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000)
#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000)
/* TIM_Prescaler_Reload_Mode */
#define TIM_PSCReloadMode_Update ((uint16_t)0x0000)
#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001)
/* TIM_Forced_Action */
#define TIM_ForcedAction_Active ((uint16_t)0x0050)
#define TIM_ForcedAction_InActive ((uint16_t)0x0040)
/* TIM_Encoder_Mode */
#define TIM_EncoderMode_TI1 ((uint16_t)0x0001)
#define TIM_EncoderMode_TI2 ((uint16_t)0x0002)
#define TIM_EncoderMode_TI12 ((uint16_t)0x0003)
/* TIM_Event_Source */
#define TIM_EventSource_Update ((uint16_t)0x0001)
#define TIM_EventSource_CC1 ((uint16_t)0x0002)
#define TIM_EventSource_CC2 ((uint16_t)0x0004)
#define TIM_EventSource_CC3 ((uint16_t)0x0008)
#define TIM_EventSource_CC4 ((uint16_t)0x0010)
#define TIM_EventSource_COM ((uint16_t)0x0020)
#define TIM_EventSource_Trigger ((uint16_t)0x0040)
#define TIM_EventSource_Break ((uint16_t)0x0080)
/* TIM_Update_Source */
#define TIM_UpdateSource_Global ((uint16_t)0x0000) /* Source of update is the counter overflow/underflow \
or the setting of UG bit, or an update generation \
through the slave mode controller. */
#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /* Source of update is counter overflow/underflow. */
/* TIM_Output_Compare_Preload_State */
#define TIM_OCPreload_Enable ((uint16_t)0x0008)
#define TIM_OCPreload_Disable ((uint16_t)0x0000)
/* TIM_Output_Compare_Fast_State */
#define TIM_OCFast_Enable ((uint16_t)0x0004)
#define TIM_OCFast_Disable ((uint16_t)0x0000)
/* TIM_Output_Compare_Clear_State */
#define TIM_OCClear_Enable ((uint16_t)0x0080)
#define TIM_OCClear_Disable ((uint16_t)0x0000)
/* TIM_Trigger_Output_Source */
#define TIM_TRGOSource_Reset ((uint16_t)0x0000)
#define TIM_TRGOSource_Enable ((uint16_t)0x0010)
#define TIM_TRGOSource_Update ((uint16_t)0x0020)
#define TIM_TRGOSource_OC1 ((uint16_t)0x0030)
#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040)
#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050)
#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060)
#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070)
/* TIM_Slave_Mode */
#define TIM_SlaveMode_Reset ((uint16_t)0x0004)
#define TIM_SlaveMode_Gated ((uint16_t)0x0005)
#define TIM_SlaveMode_Trigger ((uint16_t)0x0006)
#define TIM_SlaveMode_External1 ((uint16_t)0x0007)
/* TIM_Master_Slave_Mode */
#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080)
#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000)
/* TIM_Flags */
#define TIM_FLAG_Update ((uint16_t)0x0001)
#define TIM_FLAG_CC1 ((uint16_t)0x0002)
#define TIM_FLAG_CC2 ((uint16_t)0x0004)
#define TIM_FLAG_CC3 ((uint16_t)0x0008)
#define TIM_FLAG_CC4 ((uint16_t)0x0010)
#define TIM_FLAG_COM ((uint16_t)0x0020)
#define TIM_FLAG_Trigger ((uint16_t)0x0040)
#define TIM_FLAG_Break ((uint16_t)0x0080)
#define TIM_FLAG_CC1OF ((uint16_t)0x0200)
#define TIM_FLAG_CC2OF ((uint16_t)0x0400)
#define TIM_FLAG_CC3OF ((uint16_t)0x0800)
#define TIM_FLAG_CC4OF ((uint16_t)0x1000)
/* TIM_Legacy */
#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
/* TIM_Capture_Mode */
#define TIM_Capture_Mode0 ((uint16_t)0x0000)
#define TIM_Capture_Mode1 ((uint16_t)0x4000)
void TIM_DeInit(TIM_TypeDef *TIMx);
void TIM_TimeBaseInit(TIM_TypeDef *TIMx, TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct);
void TIM_OC1Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct);
void TIM_OC2Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct);
void TIM_OC3Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct);
void TIM_OC4Init(TIM_TypeDef *TIMx, TIM_OCInitTypeDef *TIM_OCInitStruct);
void TIM_ICInit(TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct);
void TIM_PWMIConfig(TIM_TypeDef *TIMx, TIM_ICInitTypeDef *TIM_ICInitStruct);
void TIM_BDTRConfig(TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef *TIM_TimeBaseInitStruct);
void TIM_OCStructInit(TIM_OCInitTypeDef *TIM_OCInitStruct);
void TIM_ICStructInit(TIM_ICInitTypeDef *TIM_ICInitStruct);
void TIM_BDTRStructInit(TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
void TIM_Cmd(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_CtrlPWMOutputs(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_ITConfig(TIM_TypeDef *TIMx, uint16_t TIM_IT, FunctionalState NewState);
void TIM_GenerateEvent(TIM_TypeDef *TIMx, uint16_t TIM_EventSource);
void TIM_DMAConfig(TIM_TypeDef *TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength);
void TIM_DMACmd(TIM_TypeDef *TIMx, uint16_t TIM_DMASource, FunctionalState NewState);
void TIM_InternalClockConfig(TIM_TypeDef *TIMx);
void TIM_ITRxExternalClockConfig(TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource);
void TIM_TIxExternalClockConfig(TIM_TypeDef *TIMx, uint16_t TIM_TIxExternalCLKSource,
uint16_t TIM_ICPolarity, uint16_t ICFilter);
void TIM_ETRClockMode1Config(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
uint16_t ExtTRGFilter);
void TIM_ETRClockMode2Config(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler,
uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
void TIM_ETRConfig(TIM_TypeDef *TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
uint16_t ExtTRGFilter);
void TIM_PrescalerConfig(TIM_TypeDef *TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode);
void TIM_CounterModeConfig(TIM_TypeDef *TIMx, uint16_t TIM_CounterMode);
void TIM_SelectInputTrigger(TIM_TypeDef *TIMx, uint16_t TIM_InputTriggerSource);
void TIM_EncoderInterfaceConfig(TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode,
uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
void TIM_ForcedOC1Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction);
void TIM_ForcedOC2Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction);
void TIM_ForcedOC3Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction);
void TIM_ForcedOC4Config(TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction);
void TIM_ARRPreloadConfig(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_SelectCOM(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_SelectCCDMA(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_CCPreloadControl(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_OC1PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload);
void TIM_OC2PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload);
void TIM_OC3PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload);
void TIM_OC4PreloadConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPreload);
void TIM_OC1FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast);
void TIM_OC2FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast);
void TIM_OC3FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast);
void TIM_OC4FastConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCFast);
void TIM_ClearOC1Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear);
void TIM_ClearOC2Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear);
void TIM_ClearOC3Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear);
void TIM_ClearOC4Ref(TIM_TypeDef *TIMx, uint16_t TIM_OCClear);
void TIM_OC1PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity);
void TIM_OC1NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity);
void TIM_OC2PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity);
void TIM_OC2NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity);
void TIM_OC3PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity);
void TIM_OC3NPolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity);
void TIM_OC4PolarityConfig(TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity);
void TIM_CCxCmd(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx);
void TIM_CCxNCmd(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN);
void TIM_SelectOCxM(TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode);
void TIM_UpdateDisableConfig(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_UpdateRequestConfig(TIM_TypeDef *TIMx, uint16_t TIM_UpdateSource);
void TIM_SelectHallSensor(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_SelectOnePulseMode(TIM_TypeDef *TIMx, uint16_t TIM_OPMode);
void TIM_SelectOutputTrigger(TIM_TypeDef *TIMx, uint16_t TIM_TRGOSource);
void TIM_SelectSlaveMode(TIM_TypeDef *TIMx, uint16_t TIM_SlaveMode);
void TIM_SelectMasterSlaveMode(TIM_TypeDef *TIMx, uint16_t TIM_MasterSlaveMode);
void TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter);
void TIM_SetAutoreload(TIM_TypeDef *TIMx, uint32_t Autoreload);
void TIM_SetCompare1(TIM_TypeDef *TIMx, uint32_t Compare1);
void TIM_SetCompare2(TIM_TypeDef *TIMx, uint32_t Compare2);
void TIM_SetCompare3(TIM_TypeDef *TIMx, uint32_t Compare3);
void TIM_SetCompare4(TIM_TypeDef *TIMx, uint32_t Compare4);
void TIM_SetIC1Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC);
void TIM_SetIC2Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC);
void TIM_SetIC3Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC);
void TIM_SetIC4Prescaler(TIM_TypeDef *TIMx, uint16_t TIM_ICPSC);
void TIM_SetClockDivision(TIM_TypeDef *TIMx, uint16_t TIM_CKD);
uint32_t TIM_GetCapture1(TIM_TypeDef *TIMx);
uint32_t TIM_GetCapture2(TIM_TypeDef *TIMx);
uint32_t TIM_GetCapture3(TIM_TypeDef *TIMx);
uint32_t TIM_GetCapture4(TIM_TypeDef *TIMx);
uint32_t TIM_GetCounter(TIM_TypeDef *TIMx);
uint16_t TIM_GetPrescaler(TIM_TypeDef *TIMx);
FlagStatus TIM_GetFlagStatus(TIM_TypeDef *TIMx, uint16_t TIM_FLAG);
void TIM_ClearFlag(TIM_TypeDef *TIMx, uint16_t TIM_FLAG);
ITStatus TIM_GetITStatus(TIM_TypeDef *TIMx, uint16_t TIM_IT);
void TIM_ClearITPendingBit(TIM_TypeDef *TIMx, uint16_t TIM_IT);
void TIM_CaptureLevelIndicate_Cmd(TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_CaptureModeConfig(TIM_TypeDef *TIMx, uint16_t TIM_CaptureMode);
#ifdef __cplusplus
}
#endif
#endif