dengcy
/
micro_climate
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
micro_climate/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_utils.c

914 lines
36 KiB
C
Raw Normal View History

新建
2024-07-05 03:52:43 +00:00
/**
******************************************************************************
* @file stm32l4xx_ll_utils.c
* @author MCD Application Team
* @brief UTILS LL module driver.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_ll_utils.h"
#include "stm32l4xx_ll_rcc.h"
#include "stm32l4xx_ll_system.h"
#include "stm32l4xx_ll_pwr.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
/** @addtogroup UTILS_LL
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup UTILS_LL_Private_Constants
* @{
*/
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
#define UTILS_MAX_FREQUENCY_SCALE1 120000000U /*!< Maximum frequency for system clock at power scale1, in Hz */
#define UTILS_MAX_FREQUENCY_SCALE2 26000000U /*!< Maximum frequency for system clock at power scale2, in Hz */
#else
#define UTILS_MAX_FREQUENCY_SCALE1 80000000U /*!< Maximum frequency for system clock at power scale1, in Hz */
#define UTILS_MAX_FREQUENCY_SCALE2 26000000U /*!< Maximum frequency for system clock at power scale2, in Hz */
#endif
/* Defines used for PLL range */
#define UTILS_PLLVCO_INPUT_MIN 4000000U /*!< Frequency min for PLLVCO input, in Hz */
#define UTILS_PLLVCO_INPUT_MAX 16000000U /*!< Frequency max for PLLVCO input, in Hz */
#define UTILS_PLLVCO_OUTPUT_MIN 64000000U /*!< Frequency min for PLLVCO output, in Hz */
#define UTILS_PLLVCO_OUTPUT_MAX 344000000U /*!< Frequency max for PLLVCO output, in Hz */
/* Defines used for HSE range */
#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */
#define UTILS_HSE_FREQUENCY_MAX 48000000U /*!< Frequency max for HSE frequency, in Hz */
/* Defines used for FLASH latency according to HCLK Frequency */
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
#define UTILS_SCALE1_LATENCY1_FREQ 20000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */
#define UTILS_SCALE1_LATENCY2_FREQ 40000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */
#define UTILS_SCALE1_LATENCY3_FREQ 60000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */
#define UTILS_SCALE1_LATENCY4_FREQ 80000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */
#define UTILS_SCALE1_LATENCY5_FREQ 100000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */
#define UTILS_SCALE2_LATENCY1_FREQ 8000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 2 */
#define UTILS_SCALE2_LATENCY2_FREQ 16000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 2 */
#else
#define UTILS_SCALE1_LATENCY1_FREQ 16000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 1 */
#define UTILS_SCALE1_LATENCY2_FREQ 32000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 1 */
#define UTILS_SCALE1_LATENCY3_FREQ 48000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 1 */
#define UTILS_SCALE1_LATENCY4_FREQ 64000000U /*!< HCLK frequency to set FLASH latency 4 in power scale 1 */
#define UTILS_SCALE2_LATENCY1_FREQ 6000000U /*!< HCLK frequency to set FLASH latency 1 in power scale 2 */
#define UTILS_SCALE2_LATENCY2_FREQ 12000000U /*!< HCLK frequency to set FLASH latency 2 in power scale 2 */
#define UTILS_SCALE2_LATENCY3_FREQ 18000000U /*!< HCLK frequency to set FLASH latency 3 in power scale 2 */
#endif
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup UTILS_LL_Private_Macros
* @{
*/
#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_512))
#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_2) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_4) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_8) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_16))
#define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \
|| ((__VALUE__) == LL_RCC_APB2_DIV_2) \
|| ((__VALUE__) == LL_RCC_APB2_DIV_4) \
|| ((__VALUE__) == LL_RCC_APB2_DIV_8) \
|| ((__VALUE__) == LL_RCC_APB2_DIV_16))
#define IS_LL_UTILS_PLLM_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLM_DIV_1) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_2) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_3) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_4) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_5) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_6) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_7) \
|| ((__VALUE__) == LL_RCC_PLLM_DIV_8))
#define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U))
#define IS_LL_UTILS_PLLR_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLR_DIV_2) \
|| ((__VALUE__) == LL_RCC_PLLR_DIV_4) \
|| ((__VALUE__) == LL_RCC_PLLR_DIV_6) \
|| ((__VALUE__) == LL_RCC_PLLR_DIV_8))
#define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__) ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX))
#define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX))
#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \
((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2))
#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \
|| ((__STATE__) == LL_UTILS_HSEBYPASS_OFF))
#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup UTILS_LL_Private_Functions UTILS Private functions
* @{
*/
static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct);
static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
static ErrorStatus UTILS_PLL_IsBusy(void);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UTILS_LL_Exported_Functions
* @{
*/
/** @addtogroup UTILS_LL_EF_DELAY
* @{
*/
/**
* @brief This function configures the Cortex-M SysTick source to have 1ms time base.
* @note When a RTOS is used, it is recommended to avoid changing the Systick
* configuration by calling this function, for a delay use rather osDelay RTOS service.
* @param HCLKFrequency HCLK frequency in Hz
* @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq
* @retval None
*/
void LL_Init1msTick(uint32_t HCLKFrequency)
{
/* Use frequency provided in argument */
LL_InitTick(HCLKFrequency, 1000U);
}
/**
* @brief This function provides accurate delay (in milliseconds) based
* on SysTick counter flag
* @note When a RTOS is used, it is recommended to avoid using blocking delay
* and use rather osDelay service.
* @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which
* will configure Systick to 1ms
* @param Delay specifies the delay time length, in milliseconds.
* @retval None
*/
void LL_mDelay(uint32_t Delay)
{
__IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */
uint32_t tmpDelay = Delay;
/* Add this code to indicate that local variable is not used */
((void)tmp);
/* Add a period to guaranty minimum wait */
if(tmpDelay < LL_MAX_DELAY)
{
tmpDelay++;
}
while (tmpDelay != 0U)
{
if((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U)
{
tmpDelay--;
}
}
}
/**
* @}
*/
/** @addtogroup UTILS_EF_SYSTEM
* @brief System Configuration functions
*
@verbatim
===============================================================================
##### System Configuration functions #####
===============================================================================
[..]
System, AHB and APB buses clocks configuration
(+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is
120000000 Hz for STM32L4Rx/STM32L4Sx devices and 80000000 Hz for others.
@endverbatim
@internal
Depending on the device voltage range, the maximum frequency should be
adapted accordingly:
(++) Table 1. HCLK clock frequency for STM32L4+ Series devices
(++) +--------------------------------------------------------+
(++) | Latency | HCLK clock frequency (MHz) |
(++) | |--------------------------------------|
(++) | | voltage range 1 | voltage range 2 |
(++) | | 1.2 V | 1.0 V |
(++) |-----------------|-------------------|------------------|
(++) |0WS(1 CPU cycles)| 0 < HCLK <= 20 | 0 < HCLK <= 8 |
(++) |-----------------|-------------------|------------------|
(++) |1WS(2 CPU cycles)| 20 < HCLK <= 40 | 8 < HCLK <= 16 |
(++) |-----------------|-------------------|------------------|
(++) |2WS(3 CPU cycles)| 40 < HCLK <= 60 | 16 < HCLK <= 26 |
(++) |-----------------|-------------------|------------------|
(++) |3WS(4 CPU cycles)| 60 < HCLK <= 80 | 16 < HCLK <= 26 |
(++) |-----------------|-------------------|------------------|
(++) |4WS(5 CPU cycles)| 80 < HCLK <= 100 | 16 < HCLK <= 26 |
(++) |-----------------|-------------------|------------------|
(++) |5WS(6 CPU cycles)| 100 < HCLK <= 120 | 16 < HCLK <= 26 |
(++) +--------------------------------------------------------+
(++) Table 2. HCLK clock frequency for STM32L4 Series devices
(++) +-------------------------------------------------------+
(++) | Latency | HCLK clock frequency (MHz) |
(++) | |-------------------------------------|
(++) | | voltage range 1 | voltage range 2 |
(++) | | 1.2 V | 1.0 V |
(++) |-----------------|------------------|------------------|
(++) |0WS(1 CPU cycles)| 0 < HCLK <= 16 | 0 < HCLK <= 6 |
(++) |-----------------|------------------|------------------|
(++) |1WS(2 CPU cycles)| 16 < HCLK <= 32 | 6 < HCLK <= 12 |
(++) |-----------------|------------------|------------------|
(++) |2WS(3 CPU cycles)| 32 < HCLK <= 48 | 12 < HCLK <= 18 |
(++) |-----------------|------------------|------------------|
(++) |3WS(4 CPU cycles)| 48 < HCLK <= 64 | 18 < HCLK <= 26 |
(++) |-----------------|------------------|------------------|
(++) |4WS(5 CPU cycles)| 64 < HCLK <= 80 | 18 < HCLK <= 26 |
(++) +-------------------------------------------------------+
@endinternal
* @{
*/
/**
* @brief This function sets directly SystemCoreClock CMSIS variable.
* @note Variable can be calculated also through SystemCoreClockUpdate function.
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
* @retval None
*/
void LL_SetSystemCoreClock(uint32_t HCLKFrequency)
{
/* HCLK clock frequency */
SystemCoreClock = HCLKFrequency;
}
/**
* @brief Update number of Flash wait states in line with new frequency and current
voltage range.
* @param HCLKFrequency HCLK frequency
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Latency has been modified
* - ERROR: Latency cannot be modified
*/
ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency)
{
ErrorStatus status = SUCCESS;
uint32_t latency = LL_FLASH_LATENCY_0; /* default value 0WS */
/* Frequency cannot be equal to 0 or greater than max clock */
if ((HCLKFrequency == 0U) || (HCLKFrequency > UTILS_MAX_FREQUENCY_SCALE1))
{
status = ERROR;
}
else
{
if(LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1)
{
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
if(HCLKFrequency > UTILS_SCALE1_LATENCY5_FREQ)
{
/* 100 < HCLK <= 120 => 5WS (6 CPU cycles) */
latency = LL_FLASH_LATENCY_5;
}
else if(HCLKFrequency > UTILS_SCALE1_LATENCY4_FREQ)
{
/* 80 < HCLK <= 100 => 4WS (5 CPU cycles) */
latency = LL_FLASH_LATENCY_4;
}
else if(HCLKFrequency > UTILS_SCALE1_LATENCY3_FREQ)
{
/* 60 < HCLK <= 80 => 3WS (4 CPU cycles) */
latency = LL_FLASH_LATENCY_3;
}
else if(HCLKFrequency > UTILS_SCALE1_LATENCY2_FREQ)
{
/* 40 < HCLK <= 20 => 2WS (3 CPU cycles) */
latency = LL_FLASH_LATENCY_2;
}
else
{
if(HCLKFrequency > UTILS_SCALE1_LATENCY1_FREQ)
{
/* 20 < HCLK <= 40 => 1WS (2 CPU cycles) */
latency = LL_FLASH_LATENCY_1;
}
/* else HCLKFrequency <= 10MHz default LL_FLASH_LATENCY_0 0WS */
}
#else
if(HCLKFrequency > UTILS_SCALE1_LATENCY4_FREQ)
{
/* 64 < HCLK <= 80 => 4WS (5 CPU cycles) */
latency = LL_FLASH_LATENCY_4;
}
else if(HCLKFrequency > UTILS_SCALE1_LATENCY3_FREQ)
{
/* 48 < HCLK <= 64 => 3WS (4 CPU cycles) */
latency = LL_FLASH_LATENCY_3;
}
else if(HCLKFrequency > UTILS_SCALE1_LATENCY2_FREQ)
{
/* 32 < HCLK <= 48 => 2WS (3 CPU cycles) */
latency = LL_FLASH_LATENCY_2;
}
else
{
if(HCLKFrequency > UTILS_SCALE1_LATENCY1_FREQ)
{
/* 16 < HCLK <= 32 => 1WS (2 CPU cycles) */
latency = LL_FLASH_LATENCY_1;
}
/* else HCLKFrequency <= 16MHz default LL_FLASH_LATENCY_0 0WS */
}
#endif
}
else /* SCALE2 */
{
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
if(HCLKFrequency > UTILS_MAX_FREQUENCY_SCALE2)
{
/* Unexpected HCLK > 26 */
status = ERROR;
}
else if(HCLKFrequency > UTILS_SCALE2_LATENCY2_FREQ)
{
/* 16 < HCLK <= 26 => 2WS (3 CPU cycles) */
latency = LL_FLASH_LATENCY_2;
}
else
{
if(HCLKFrequency > UTILS_SCALE2_LATENCY1_FREQ)
{
/* 8 < HCLK <= 16 => 1WS (2 CPU cycles) */
latency = LL_FLASH_LATENCY_1;
}
/* else HCLKFrequency <= 8MHz default LL_FLASH_LATENCY_0 0WS */
}
#else
if(HCLKFrequency > UTILS_MAX_FREQUENCY_SCALE2)
{
/* Unexpected HCLK > 26 */
status = ERROR;
}
else if(HCLKFrequency > UTILS_SCALE2_LATENCY3_FREQ)
{
/* 18 < HCLK <= 26 => 3WS (4 CPU cycles) */
latency = LL_FLASH_LATENCY_3;
}
else if(HCLKFrequency > UTILS_SCALE2_LATENCY2_FREQ)
{
/* 12 < HCLK <= 18 => 2WS (3 CPU cycles) */
latency = LL_FLASH_LATENCY_2;
}
else
{
if(HCLKFrequency > UTILS_SCALE2_LATENCY1_FREQ)
{
/* 6 < HCLK <= 12 => 1WS (2 CPU cycles) */
latency = LL_FLASH_LATENCY_1;
}
/* else HCLKFrequency <= 6MHz default LL_FLASH_LATENCY_0 0WS */
}
#endif
}
LL_FLASH_SetLatency(latency);
/* Check that the new number of wait states is taken into account to access the Flash
memory by reading the FLASH_ACR register */
if(LL_FLASH_GetLatency() != latency)
{
status = ERROR;
}
}
return status;
}
/**
* @brief This function configures system clock with MSI as clock source of the PLL
* @note The application needs to ensure that PLL, PLLSAI1 and/or PLLSAI2 are disabled.
* @note Function is based on the following formula:
* - PLL output frequency = (((MSI frequency / PLLM) * PLLN) / PLLR)
* - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = MSI frequency / PLLM)
* - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN)
* - PLLR: ensure that max frequency at 120000000 Hz is reached (PLLVCO_output / PLLR)
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Max frequency configuration done
* - ERROR: Max frequency configuration not done
*/
ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status = SUCCESS;
uint32_t pllfreq, msi_range;
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
uint32_t hpre = 0U; /* Set default value */
#endif
/* Check if one of the PLL is enabled */
if(UTILS_PLL_IsBusy() == SUCCESS)
{
/* Get the current MSI range */
if(LL_RCC_MSI_IsEnabledRangeSelect() != 0U)
{
msi_range = LL_RCC_MSI_GetRange();
switch (msi_range)
{
case LL_RCC_MSIRANGE_0: /* MSI = 100 KHz */
case LL_RCC_MSIRANGE_1: /* MSI = 200 KHz */
case LL_RCC_MSIRANGE_2: /* MSI = 400 KHz */
case LL_RCC_MSIRANGE_3: /* MSI = 800 KHz */
case LL_RCC_MSIRANGE_4: /* MSI = 1 MHz */
case LL_RCC_MSIRANGE_5: /* MSI = 2 MHz */
/* PLLVCO input frequency is not in the range from 4 to 16 MHz*/
status = ERROR;
break;
case LL_RCC_MSIRANGE_6: /* MSI = 4 MHz */
case LL_RCC_MSIRANGE_7: /* MSI = 8 MHz */
case LL_RCC_MSIRANGE_8: /* MSI = 16 MHz */
case LL_RCC_MSIRANGE_9: /* MSI = 24 MHz */
case LL_RCC_MSIRANGE_10: /* MSI = 32 MHz */
case LL_RCC_MSIRANGE_11: /* MSI = 48 MHz */
default:
break;
}
}
else
{
msi_range = LL_RCC_MSI_GetRangeAfterStandby();
switch (msi_range)
{
case LL_RCC_MSISRANGE_4: /* MSI = 1 MHz */
case LL_RCC_MSISRANGE_5: /* MSI = 2 MHz */
/* PLLVCO input frequency is not in the range from 4 to 16 MHz*/
status = ERROR;
break;
case LL_RCC_MSISRANGE_7: /* MSI = 8 MHz */
case LL_RCC_MSISRANGE_6: /* MSI = 4 MHz */
default:
break;
}
}
/* Main PLL configuration and activation */
if(status != ERROR)
{
/* Calculate the new PLL output frequency */
pllfreq = UTILS_GetPLLOutputFrequency(__LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(), msi_range),
UTILS_PLLInitStruct);
/* Enable MSI if not enabled */
if(LL_RCC_MSI_IsReady() != 1U)
{
LL_RCC_MSI_Enable();
while ((LL_RCC_MSI_IsReady() != 1U))
{
/* Wait for MSI ready */
}
}
/* Configure PLL */
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
UTILS_PLLInitStruct->PLLR);
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
/* Prevent undershoot at highest frequency by applying intermediate AHB prescaler 2 */
if(pllfreq > 80000000U)
{
if(UTILS_ClkInitStruct->AHBCLKDivider == LL_RCC_SYSCLK_DIV_1)
{
UTILS_ClkInitStruct->AHBCLKDivider = LL_RCC_SYSCLK_DIV_2;
hpre = LL_RCC_SYSCLK_DIV_2;
}
}
#endif
/* Enable PLL and switch system clock to PLL */
status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
/* Apply definitive AHB prescaler value if necessary */
if((status == SUCCESS) && (hpre != LL_RCC_SYSCLK_DIV_1))
{
/* Set FLASH latency to highest latency */
status = LL_SetFlashLatency(pllfreq);
if(status == SUCCESS)
{
UTILS_ClkInitStruct->AHBCLKDivider = LL_RCC_SYSCLK_DIV_1;
LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
LL_SetSystemCoreClock(pllfreq);
}
}
#endif
}
}
else
{
/* Current PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
/**
* @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL
* @note The application need to ensure that PLL, PLLSAI1 and/or PLLSAI2 are disabled.
* @note Function is based on the following formula:
* - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLR)
* - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = HSI frequency / PLLM)
* - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN)
* - PLLR: ensure that max frequency at 120000000 Hz is reach (PLLVCO_output / PLLR)
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Max frequency configuration done
* - ERROR: Max frequency configuration not done
*/
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status;
uint32_t pllfreq;
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
uint32_t hpre = LL_RCC_SYSCLK_DIV_1; /* Set default value */
#endif
/* Check if one of the PLL is enabled */
if(UTILS_PLL_IsBusy() == SUCCESS)
{
/* Calculate the new PLL output frequency */
pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct);
/* Enable HSI if not enabled */
if(LL_RCC_HSI_IsReady() != 1U)
{
LL_RCC_HSI_Enable();
while (LL_RCC_HSI_IsReady() != 1U)
{
/* Wait for HSI ready */
}
}
/* Configure PLL */
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
UTILS_PLLInitStruct->PLLR);
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
/* Prevent undershoot at highest frequency by applying intermediate AHB prescaler 2 */
if(pllfreq > 80000000U)
{
if(UTILS_ClkInitStruct->AHBCLKDivider == LL_RCC_SYSCLK_DIV_1)
{
UTILS_ClkInitStruct->AHBCLKDivider = LL_RCC_SYSCLK_DIV_2;
hpre = LL_RCC_SYSCLK_DIV_2;
}
}
#endif
/* Enable PLL and switch system clock to PLL */
status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
/* Apply definitive AHB prescaler value if necessary */
if((status == SUCCESS) && (hpre != LL_RCC_SYSCLK_DIV_1))
{
/* Set FLASH latency to highest latency */
status = LL_SetFlashLatency(pllfreq);
if(status == SUCCESS)
{
UTILS_ClkInitStruct->AHBCLKDivider = LL_RCC_SYSCLK_DIV_1;
LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
LL_SetSystemCoreClock(pllfreq);
}
}
#endif
}
else
{
/* Current PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
/**
* @brief This function configures system clock with HSE as clock source of the PLL
* @note The application need to ensure that PLL, PLLSAI1 and/or PLLSAI2 are disabled.
* @note Function is based on the following formula:
* - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLR)
* - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz (PLLVCO_input = HSE frequency / PLLM)
* - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN)
* - PLLR: ensure that max frequency at 120000000 Hz is reached (PLLVCO_output / PLLR)
* @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 48000000
* @param HSEBypass This parameter can be one of the following values:
* @arg @ref LL_UTILS_HSEBYPASS_ON
* @arg @ref LL_UTILS_HSEBYPASS_OFF
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Max frequency configuration done
* - ERROR: Max frequency configuration not done
*/
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status;
uint32_t pllfreq;
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
uint32_t hpre = 0U; /* Set default value */
#endif
/* Check the parameters */
assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency));
assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass));
/* Check if one of the PLL is enabled */
if(UTILS_PLL_IsBusy() == SUCCESS)
{
/* Calculate the new PLL output frequency */
pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct);
/* Enable HSE if not enabled */
if(LL_RCC_HSE_IsReady() != 1U)
{
/* Check if need to enable HSE bypass feature or not */
if(HSEBypass == LL_UTILS_HSEBYPASS_ON)
{
LL_RCC_HSE_EnableBypass();
}
else
{
LL_RCC_HSE_DisableBypass();
}
/* Enable HSE */
LL_RCC_HSE_Enable();
while (LL_RCC_HSE_IsReady() != 1U)
{
/* Wait for HSE ready */
}
}
/* Configure PLL */
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN,
UTILS_PLLInitStruct->PLLR);
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
/* Prevent undershoot at highest frequency by applying intermediate AHB prescaler 2 */
if(pllfreq > 80000000U)
{
if(UTILS_ClkInitStruct->AHBCLKDivider == LL_RCC_SYSCLK_DIV_1)
{
UTILS_ClkInitStruct->AHBCLKDivider = LL_RCC_SYSCLK_DIV_2;
hpre = LL_RCC_SYSCLK_DIV_2;
}
}
#endif
/* Enable PLL and switch system clock to PLL */
status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \
defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
/* Apply definitive AHB prescaler value if necessary */
if((status == SUCCESS) && (hpre != LL_RCC_SYSCLK_DIV_1))
{
/* Set FLASH latency to highest latency */
status = LL_SetFlashLatency(pllfreq);
if(status == SUCCESS)
{
UTILS_ClkInitStruct->AHBCLKDivider = LL_RCC_SYSCLK_DIV_1;
LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
LL_SetSystemCoreClock(pllfreq);
}
}
#endif
}
else
{
/* Current PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/** @addtogroup UTILS_LL_Private_Functions
* @{
*/
/**
* @brief Function to check that PLL can be modified
* @param PLL_InputFrequency PLL input frequency (in Hz)
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @retval PLL output frequency (in Hz)
*/
static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct)
{
uint32_t pllfreq;
/* Check the parameters */
assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM));
assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN));
assert_param(IS_LL_UTILS_PLLR_VALUE(UTILS_PLLInitStruct->PLLR));
/* Check different PLL parameters according to RM */
/* - PLLM: ensure that the VCO input frequency ranges from 4 to 16 MHz. */
pllfreq = PLL_InputFrequency / (((UTILS_PLLInitStruct->PLLM >> RCC_PLLCFGR_PLLM_Pos) + 1U));
assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq));
/* - PLLN: ensure that the VCO output frequency is between 64 and 344 MHz.*/
pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos));
assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq));
/* - PLLR: ensure that max frequency at 120000000 Hz is reached */
pllfreq = pllfreq / (((UTILS_PLLInitStruct->PLLR >> RCC_PLLCFGR_PLLR_Pos) + 1U) * 2U);
assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq));
return pllfreq;
}
/**
* @brief Function to check that PLL can be modified
* @retval An ErrorStatus enumeration value:
* - SUCCESS: PLL modification can be done
* - ERROR: PLL is busy
*/
static ErrorStatus UTILS_PLL_IsBusy(void)
{
ErrorStatus status = SUCCESS;
/* Check if PLL is busy*/
if(LL_RCC_PLL_IsReady() != 0U)
{
/* PLL configuration cannot be modified */
status = ERROR;
}
#if defined(RCC_PLLSAI1_SUPPORT)
/* Check if PLLSAI1 is busy*/
if(LL_RCC_PLLSAI1_IsReady() != 0U)
{
/* PLLSAI1 configuration cannot be modified */
status = ERROR;
}
#endif /*RCC_PLLSAI1_SUPPORT*/
#if defined(RCC_PLLSAI2_SUPPORT)
/* Check if PLLSAI2 is busy*/
if(LL_RCC_PLLSAI2_IsReady() != 0U)
{
/* PLLSAI2 configuration cannot be modified */
status = ERROR;
}
#endif /*RCC_PLLSAI2_SUPPORT*/
return status;
}
/**
* @brief Function to enable PLL and switch system clock to PLL
* @param SYSCLK_Frequency SYSCLK frequency
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: No problem to switch system to PLL
* - ERROR: Problem to switch system to PLL
*/
static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status = SUCCESS;
uint32_t hclk_frequency;
assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider));
assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider));
assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider));
/* Calculate HCLK frequency */
hclk_frequency = __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider);
/* Increasing the number of wait states because of higher CPU frequency */
if(SystemCoreClock < hclk_frequency)
{
/* Set FLASH latency to highest latency */
status = LL_SetFlashLatency(hclk_frequency);
}
/* Update system clock configuration */
if(status == SUCCESS)
{
/* Enable PLL */
LL_RCC_PLL_Enable();
LL_RCC_PLL_EnableDomain_SYS();
while (LL_RCC_PLL_IsReady() != 1U)
{
/* Wait for PLL ready */
}
/* Sysclk activation on the main PLL */
LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
{
/* Wait for system clock switch to PLL */
}
/* Set APB1 & APB2 prescaler*/
LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider);
LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider);
}
/* Decreasing the number of wait states because of lower CPU frequency */
if(SystemCoreClock > hclk_frequency)
{
/* Set FLASH latency to lowest latency */
status = LL_SetFlashLatency(hclk_frequency);
}
/* Update SystemCoreClock variable */
if(status == SUCCESS)
{
LL_SetSystemCoreClock(hclk_frequency);
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/