dengcy
/
micro_climate
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

可以BootLoader升级了，要使用IAR调试需要将Linker-Config-Linker configuration file换为同目录下stm32l496xx_flash.icf；system_stm32l4xx.c换为同目录下system_stm32l4xx - 副本.c

This commit is contained in:
95384 2024-11-13 17:47:27 +08:00
parent cea097ec44
commit 1d1b656238
7 changed files with 405 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
App/Src/inflash.c
View File

@ -18,9 +18,12 @@ config_info g_stConfigInfo={
.speed_average_time = 600, /* 平均风速默认10分钟更新 */
.temp_hum_update_time = 600, /* 温湿度更新时间 */
.transducer_cfg_1R5 = 15, /* 大宇换能器参数 */
.transducer_cfg_4R5 = 45, /* 大宇换能器参数 */
.transducer_cfg_8R0 = 80, /* 大宇换能器参数 */
// .transducer_cfg_1R5 = 15, /* 大宇换能器参数 */
// .transducer_cfg_4R5 = 45, /* 大宇换能器参数 */
// .transducer_cfg_8R0 = 80, /* 大宇换能器参数 */
.transducer_cfg_1R5 = 10, /* 无锡电声换能器参数 */
.transducer_cfg_4R5 = 35, /* 无锡电声换能器参数 */
.transducer_cfg_8R0 = 65, /* 无锡电声换能器参数 */
.RSSI_range = 20, /* RSSI大于0.2有效 */
.flag_end = FLAG_SAVE_INFLASH_END,
};

337
Core/Src/system_stm32l4xx - 副本.c Normal file
View File

@ -0,0 +1,337 @@
/**
******************************************************************************
* @file system_stm32l4xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32l4xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
* After each device reset the MSI (4 MHz) is used as system clock source.
* Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to
* configure the system clock before to branch to main program.
*
* This file configures the system clock as follows:
*=============================================================================
*-----------------------------------------------------------------------------
* System Clock source | MSI
*-----------------------------------------------------------------------------
* SYSCLK(Hz) | 4000000
*-----------------------------------------------------------------------------
* HCLK(Hz) | 4000000
*-----------------------------------------------------------------------------
* AHB Prescaler | 1
*-----------------------------------------------------------------------------
* APB1 Prescaler | 1
*-----------------------------------------------------------------------------
* APB2 Prescaler | 1
*-----------------------------------------------------------------------------
* PLL_M | 1
*-----------------------------------------------------------------------------
* PLL_N | 8
*-----------------------------------------------------------------------------
* PLL_P | 7
*-----------------------------------------------------------------------------
* PLL_Q | 2
*-----------------------------------------------------------------------------
* PLL_R | 2
*-----------------------------------------------------------------------------
* PLLSAI1_P | NA
*-----------------------------------------------------------------------------
* PLLSAI1_Q | NA
*-----------------------------------------------------------------------------
* PLLSAI1_R | NA
*-----------------------------------------------------------------------------
* PLLSAI2_P | NA
*-----------------------------------------------------------------------------
* PLLSAI2_Q | NA
*-----------------------------------------------------------------------------
* PLLSAI2_R | NA
*-----------------------------------------------------------------------------
* Require 48MHz for USB OTG FS, | Disabled
* SDIO and RNG clock |
*-----------------------------------------------------------------------------
*=============================================================================
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Apache License, Version 2.0,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/Apache-2.0
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32l4xx_system
* @{
*/
/** @addtogroup STM32L4xx_System_Private_Includes
* @{
*/
#include "stm32l4xx.h"
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (MSI_VALUE)
#define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/
#endif /* MSI_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Private_Variables
* @{
*/
/* The SystemCoreClock variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 4000000U;
const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \
4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U};
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32L4xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* FPU settings ------------------------------------------------------------*/
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state ------------*/
/* Set MSION bit */
RCC->CR |= RCC_CR_MSION;
/* Reset CFGR register */
RCC->CFGR = 0x00000000U;
/* Reset HSEON, CSSON , HSION, and PLLON bits */
RCC->CR &= 0xEAF6FFFFU;
/* Reset PLLCFGR register */
RCC->PLLCFGR = 0x00001000U;
/* Reset HSEBYP bit */
RCC->CR &= 0xFFFBFFFFU;
/* Disable all interrupts */
RCC->CIER = 0x00000000U;
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
* or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
* 4 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U;
/* Get MSI Range frequency--------------------------------------------------*/
if((RCC->CR & RCC_CR_MSIRGSEL) == RESET)
{ /* MSISRANGE from RCC_CSR applies */
msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U;
}
else
{ /* MSIRANGE from RCC_CR applies */
msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U;
}
/*MSI frequency range in HZ*/
msirange = MSIRangeTable[msirange];
/* Get SYSCLK source -------------------------------------------------------*/
switch (RCC->CFGR & RCC_CFGR_SWS)
{
case 0x00: /* MSI used as system clock source */
SystemCoreClock = msirange;
break;
case 0x04: /* HSI used as system clock source */
SystemCoreClock = HSI_VALUE;
break;
case 0x08: /* HSE used as system clock source */
SystemCoreClock = HSE_VALUE;
break;
case 0x0C: /* PLL used as system clock source */
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
SYSCLK = PLL_VCO / PLLR
*/
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ;
switch (pllsource)
{
case 0x02: /* HSI used as PLL clock source */
pllvco = (HSI_VALUE / pllm);
break;
case 0x03: /* HSE used as PLL clock source */
pllvco = (HSE_VALUE / pllm);
break;
default: /* MSI used as PLL clock source */
pllvco = (msirange / pllm);
break;
}
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U);
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U;
SystemCoreClock = pllvco/pllr;
break;
default:
SystemCoreClock = msirange;
break;
}
/* Compute HCLK clock frequency --------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

38
Core/Src/system_stm32l4xx.c
View File

@ -119,12 +119,31 @@
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/* Note: Following vector table addresses must be defined in line with linker
configuration. */
/*!< Uncomment the following line if you need to relocate the vector table
anywhere in Flash or Sram, else the vector table is kept at the automatic
remap of boot address selected */
//#define USER_VECT_TAB_ADDRESS
#if defined(USER_VECT_TAB_ADDRESS)
/*!< Uncomment the following line if you need to relocate your vector Table
in Sram else user remap will be done in Flash. */
//#define VECT_TAB_SRAM
#if defined(VECT_TAB_SRAM)
#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base address field.
This value must be a multiple of 0x200. */
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#else
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
This value must be a multiple of 0x200. */
#define VECT_TAB_OFFSET 0x00020000U /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
#endif /* VECT_TAB_SRAM */
#endif /* USER_VECT_TAB_ADDRESS */
/******************************************************************************/
/**
* @}
@ -204,10 +223,9 @@ void SystemInit(void)
RCC->CIER = 0x00000000U;
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#if defined(USER_VECT_TAB_ADDRESS)
/* Configure the Vector Table location -------------------------------------*/
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET;
#endif
}

8
EWARM/micro_climate.ewp
View File

@ -679,11 +679,11 @@
</option>
<option>
<name>OCOutputOverride</name>
<state>1</state>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>micro_climate-1109.bin</state>
<state>micro_climate.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
@ -701,7 +701,7 @@
<data>
<extensions></extensions>
<cmdline></cmdline>
<hasPrio>24</hasPrio>
<hasPrio>160</hasPrio>
<buildSequence>inputOutputBased</buildSequence>
</data>
</settings>
@ -786,7 +786,7 @@
</option>
<option>
<name>IlinkIcfFile</name>
<state>$PROJ_DIR$\stm32l496xx_flash.icf</state>
<state>$PROJ_DIR$\stm32l496xx_flash_app-1109.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>

17
EWARM/settings/Project.wsdt
View File

File diff suppressed because one or more lines are too long

34
EWARM/settings/micro_climate.dbgdt
View File

File diff suppressed because one or more lines are too long

8
EWARM/settings/micro_climate.dnx
View File

@ -26,11 +26,11 @@
<CpuHaltOnBreakpointSet>0</CpuHaltOnBreakpointSet>
</Jet>
<ArmDriver>
<EnforceMemoryConfiguration>1</EnforceMemoryConfiguration>
<EnableCache>0</EnableCache>
<EnforceMemoryConfiguration>1</EnforceMemoryConfiguration>
</ArmDriver>
<DebugChecksum>
<Checksum>1116029158</Checksum>
<Checksum>3526353147</Checksum>
</DebugChecksum>
<Exceptions>
<StopOnUncaught>_ 0</StopOnUncaught>
@ -66,12 +66,12 @@
<ShowArgs>0</ShowArgs>
</CallStack>
<StLinkDriver>
<stlinkResetStyle>0</stlinkResetStyle>
<stlinkResetStrategy>2</stlinkResetStrategy>
<stlinkserialNo>0665FF323541483043141633</stlinkserialNo>
<stlinkfoundProbes />
<LeaveTargetRunning>_ 0</LeaveTargetRunning>
<CStepIntDis>_ 0</CStepIntDis>
<stlinkResetStyle>0</stlinkResetStyle>
<stlinkResetStrategy>2</stlinkResetStrategy>
</StLinkDriver>
<SWOTraceHWSettings>
<OverrideDefaultClocks>0</OverrideDefaultClocks>