#ifndef  _FRT_PROTOCOL_H_
#define  _FRT_PROTOCOL_H_

#include "uart_dev.h"
#include "pdebug.h"
#include "timer.h"
#include "comm_types.h"


#ifdef __cplusplus
extern "C" {
#endif

/* 富奥通微气象modbus传感器协议 */   
/* 功能码 */
typedef enum 
{
   FRT_FUNCTION_CODE_READ_REGISTER   =   0x03,  /* 读寄存器 */
   FRT_FUNCTION_CODE_WRITE_REGISTER  =   0x10,  /* 写寄存器 */
} FRT_MsgFunctionCode_e;  
  
/* 寄存器地址 */
typedef enum
{
   FRT_REGISTER_MIN_WIND_DIRECTION       = 0,  /* 最小风向       */
   FRT_REGISTER_AVERAGE_WIND_DIRECTION   = 1,  /* 平均风向       */
   FRT_REGISTER_MAX_WIND_DIRECTION       = 2,  /* 最大风向       */
   FRT_REGISTER_MIN_WIND_SPEED           = 3,  /* 最小风速       */
   FRT_REGISTER_AVERAGE_WIND_SPEED       = 4,  /* 平均风速       */
   FRT_REGISTER_MAX_WIND_SPEED           = 5,  /* 最大风速       */
   FRT_REGISTER_TEMPERATURE              = 6,  /* 大气温度       */
   FRT_REGISTER_HUMIDITY                 = 7,  /* 大气湿度       */
   FRT_REGISTER_PRESSURE                 = 8,  /* 大气压         */
   FRT_REGISTER_RAIN                     = 9,  /* 雨量           */
   FRT_REGISTER_PRECIPITATION_INTENSITY  = 10, /* 总辐射         */
   
   FRT_REGISTER_DEVICE_ADDR              = 20, /* 设备地址       */
   FRT_REGISTER_COMMU_BAUDRATE           = 21, /* 波特率         */
   FRT_REGISTER_SPEED_AVERAGE_TIME       = 22, /* 风速平均时间   */
   FRT_REGISTER_TEMPHUM_UPDATE_TIME      = 23, /* 温湿度更新时间 */
   FRT_REGISTER_RAIN_POWER_CONTROL       = 24, /* 雨量电源控制   */
   FRT_REGISTER_RAIN_REST                = 25, /* 雨量复位       */
   FRT_REGISTER_SOFT_REST                = 26, /* 软件复位       */
   FRT_REGISTER_REST_DEFAULT_SETTING     = 27, /* 恢复出厂设置   */ 
   FRT_REGISTER_PROTOCOL_SETTING         = 28, /* 设置协议:0-ASCII;1-MODBUS协议 */
   
   FRT_REGISTER_TRANSDUCER_CFG_1R5       = 30, /* 换能器参数      */
   FRT_REGISTER_TRANSDUCER_CFG_4R5       = 31, /* 换能器参数      */
   FRT_REGISTER_TRANSDUCER_CFG_8R0       = 32, /* 换能器参数      */
   FRT_REGISTER_RSSI_RANGE               = 33, /* RSSI有效范围    */
   FRT_REGISTER_DISTANCE                 = 34, /* 换能器表面距离  */
   FRT_REGISTER_ERROR_LOG                = 35, /* 错误日志        */
   FRT_REGISTER_WIND_C                   = 36, /* 计算得到的风速  */
   FRT_REGISTER_LINEAR_POINT_X_1         = 37, /* 线性插值原始点1 */
   FRT_REGISTER_LINEAR_POINT_X_2         = 38, /* 线性插值原始点2 */
   FRT_REGISTER_LINEAR_POINT_X_3         = 39, /* 线性插值原始点3 */
   FRT_REGISTER_LINEAR_POINT_X_4         = 40, /* 线性插值原始点4 */
   FRT_REGISTER_LINEAR_POINT_X_5         = 41, /* 线性插值原始点5 */
   FRT_REGISTER_LINEAR_POINT_Y_1         = 42, /* 线性插值校准点1 */
   FRT_REGISTER_LINEAR_POINT_Y_2         = 43, /* 线性插值校准点2 */
   FRT_REGISTER_LINEAR_POINT_Y_3         = 44, /* 线性插值校准点3 */
   FRT_REGISTER_LINEAR_POINT_Y_4         = 45, /* 线性插值校准点4 */
   FRT_REGISTER_LINEAR_POINT_Y_5         = 46, /* 线性插值校准点5 */
   FRT_REGISTER_LINEAR_ENABLE            = 47, /* 线性插值使能    */
}FRT_MsgRegister;

#pragma pack(push,1)
typedef struct  _frt_climate_pack{
    unsigned char addr;
	unsigned char func;
	unsigned char addr_begin_high_byte;
	unsigned char addr_begin_low_byte;
	unsigned char regnum_begin_high_byte;
	unsigned char regnum_begin_low_byte;
	unsigned char crc_low_byte;
	unsigned char crc_high_byte;
}frt_climate_pack;

typedef struct  _frt_climate_pack_write{
    unsigned char addr;
	unsigned char func;
	unsigned char addr_begin_high_byte;
	unsigned char addr_begin_low_byte;
	unsigned char regnum_begin_high_byte;
	unsigned char regnum_begin_low_byte;
    unsigned char byte_num;
    unsigned char *reg_val;
	unsigned char crc_low_byte;
	unsigned char crc_high_byte;
}frt_climate_pack_write;
#define FRT_CLIMATE_PACK_SIZE(x)   (sizeof(frt_climate_pack))
#define FRT_CLIMATE_PACK_CRC16(x)  ((x->crc_low_byte)|(x->crc_high_byte<<8))

#define FRT_CLIMATE_BUFF_CRC16(x)    ((x[MsgLen - 2]) | (x[MsgLen - 1] << 8))

typedef struct  _frt_climate_pack_resp{
    unsigned char addr;
	unsigned char func;
	unsigned char data_len;
    unsigned char data[1];
}frt_climate_pack_resp;
  
typedef void (*MsgProcFunc)(device_handle device, void*);

/* 功能码处理函数 */
typedef struct _FRT_FunctionMsgProcTable_s{
    u_int32_t    msgId;      
    MsgProcFunc pMsgProc;   
} FRT_FuncionMsgProcTable_s;

typedef u_int16_t (*RegProcFunc)(void*);

/* 寄存器处理表 */
typedef struct _FRT_RegProcTable_s{
    u_int32_t    regId;     
    RegProcFunc pRegProc;   
} FRT_RegProcTable_s;

void read_and_process_uart_data(device_handle uart_handle);
#pragma pack(pop)

#ifdef __cplusplus
}
#endif

#endif