/** ****************************************************************************** * @file stm32l4xx_ll_lpuart.c * @author MCD Application Team * @brief LPUART LL module driver. ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ #include "stm32l4xx_ll_lpuart.h" #include "stm32l4xx_ll_rcc.h" #include "stm32l4xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ /** @addtogroup STM32L4xx_LL_Driver * @{ */ #if defined (LPUART1) /** @addtogroup LPUART_LL * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @addtogroup LPUART_LL_Private_Constants * @{ */ /* Definition of default baudrate value used for LPUART initialisation */ #define LPUART_DEFAULT_BAUDRATE (9600U) /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @addtogroup LPUART_LL_Private_Macros * @{ */ /* Check of parameters for configuration of LPUART registers */ #if defined(USART_PRESC_PRESCALER) #define IS_LL_LPUART_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPUART_PRESCALER_DIV1) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV2) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV4) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV6) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV8) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV10) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV12) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV16) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV32) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV64) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV128) \ || ((__VALUE__) == LL_LPUART_PRESCALER_DIV256)) #endif /* USART_PRESC_PRESCALER */ /* __BAUDRATE__ Depending on constraints applicable for LPUART BRR register */ /* value : */ /* - fck must be in the range [3 x baudrate, 4096 x baudrate] */ /* - LPUART_BRR register value should be >= 0x300 */ /* - LPUART_BRR register value should be <= 0xFFFFF (20 bits) */ /* Baudrate specified by the user should belong to [8, 40000000].*/ #define IS_LL_LPUART_BAUDRATE(__BAUDRATE__) (((__BAUDRATE__) <= 40000000U) && ((__BAUDRATE__) >= 8U)) /* __VALUE__ BRR content must be greater than or equal to 0x300. */ #define IS_LL_LPUART_BRR_MIN(__VALUE__) ((__VALUE__) >= 0x300U) /* __VALUE__ BRR content must be lower than or equal to 0xFFFFF. */ #define IS_LL_LPUART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x000FFFFFU) #define IS_LL_LPUART_DIRECTION(__VALUE__) (((__VALUE__) == LL_LPUART_DIRECTION_NONE) \ || ((__VALUE__) == LL_LPUART_DIRECTION_RX) \ || ((__VALUE__) == LL_LPUART_DIRECTION_TX) \ || ((__VALUE__) == LL_LPUART_DIRECTION_TX_RX)) #define IS_LL_LPUART_PARITY(__VALUE__) (((__VALUE__) == LL_LPUART_PARITY_NONE) \ || ((__VALUE__) == LL_LPUART_PARITY_EVEN) \ || ((__VALUE__) == LL_LPUART_PARITY_ODD)) #define IS_LL_LPUART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_LPUART_DATAWIDTH_7B) \ || ((__VALUE__) == LL_LPUART_DATAWIDTH_8B) \ || ((__VALUE__) == LL_LPUART_DATAWIDTH_9B)) #define IS_LL_LPUART_STOPBITS(__VALUE__) (((__VALUE__) == LL_LPUART_STOPBITS_1) \ || ((__VALUE__) == LL_LPUART_STOPBITS_2)) #define IS_LL_LPUART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_LPUART_HWCONTROL_NONE) \ || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS) \ || ((__VALUE__) == LL_LPUART_HWCONTROL_CTS) \ || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS_CTS)) /** * @} */ /* Private function prototypes -----------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup LPUART_LL_Exported_Functions * @{ */ /** @addtogroup LPUART_LL_EF_Init * @{ */ /** * @brief De-initialize LPUART registers (Registers restored to their default values). * @param LPUARTx LPUART Instance * @retval An ErrorStatus enumeration value: * - SUCCESS: LPUART registers are de-initialized * - ERROR: not applicable */ ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx) { ErrorStatus status = SUCCESS; /* Check the parameters */ assert_param(IS_LPUART_INSTANCE(LPUARTx)); if (LPUARTx == LPUART1) { /* Force reset of LPUART peripheral */ LL_APB1_GRP2_ForceReset(LL_APB1_GRP2_PERIPH_LPUART1); /* Release reset of LPUART peripheral */ LL_APB1_GRP2_ReleaseReset(LL_APB1_GRP2_PERIPH_LPUART1); } else { status = ERROR; } return (status); } /** * @brief Initialize LPUART registers according to the specified * parameters in LPUART_InitStruct. * @note As some bits in LPUART configuration registers can only be written when * the LPUART is disabled (USART_CR1_UE bit =0), * LPUART Peripheral should be in disabled state prior calling this function. * Otherwise, ERROR result will be returned. * @note Baud rate value stored in LPUART_InitStruct BaudRate field, should be valid (different from 0). * @param LPUARTx LPUART Instance * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure * that contains the configuration information for the specified LPUART peripheral. * @retval An ErrorStatus enumeration value: * - SUCCESS: LPUART registers are initialized according to LPUART_InitStruct content * - ERROR: Problem occurred during LPUART Registers initialization */ ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct) { ErrorStatus status = ERROR; uint32_t periphclk; /* Check the parameters */ assert_param(IS_LPUART_INSTANCE(LPUARTx)); #if defined(USART_PRESC_PRESCALER) assert_param(IS_LL_LPUART_PRESCALER(LPUART_InitStruct->PrescalerValue)); #endif /* USART_PRESC_PRESCALER */ assert_param(IS_LL_LPUART_BAUDRATE(LPUART_InitStruct->BaudRate)); assert_param(IS_LL_LPUART_DATAWIDTH(LPUART_InitStruct->DataWidth)); assert_param(IS_LL_LPUART_STOPBITS(LPUART_InitStruct->StopBits)); assert_param(IS_LL_LPUART_PARITY(LPUART_InitStruct->Parity)); assert_param(IS_LL_LPUART_DIRECTION(LPUART_InitStruct->TransferDirection)); assert_param(IS_LL_LPUART_HWCONTROL(LPUART_InitStruct->HardwareFlowControl)); /* LPUART needs to be in disabled state, in order to be able to configure some bits in CRx registers. Otherwise (LPUART not in Disabled state) => return ERROR */ if (LL_LPUART_IsEnabled(LPUARTx) == 0U) { /*---------------------------- LPUART CR1 Configuration ----------------------- * Configure LPUARTx CR1 (LPUART Word Length, Parity and Transfer Direction bits) with parameters: * - DataWidth: USART_CR1_M bits according to LPUART_InitStruct->DataWidth value * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to LPUART_InitStruct->Parity value * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to LPUART_InitStruct->TransferDirection value */ MODIFY_REG(LPUARTx->CR1, (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE), (LPUART_InitStruct->DataWidth | LPUART_InitStruct->Parity | LPUART_InitStruct->TransferDirection)); /*---------------------------- LPUART CR2 Configuration ----------------------- * Configure LPUARTx CR2 (Stop bits) with parameters: * - Stop Bits: USART_CR2_STOP bits according to LPUART_InitStruct->StopBits value. */ LL_LPUART_SetStopBitsLength(LPUARTx, LPUART_InitStruct->StopBits); /*---------------------------- LPUART CR3 Configuration ----------------------- * Configure LPUARTx CR3 (Hardware Flow Control) with parameters: * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according * to LPUART_InitStruct->HardwareFlowControl value. */ LL_LPUART_SetHWFlowCtrl(LPUARTx, LPUART_InitStruct->HardwareFlowControl); /*---------------------------- LPUART BRR Configuration ----------------------- * Retrieve Clock frequency used for LPUART Peripheral */ periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE); /* Configure the LPUART Baud Rate : #if defined(USART_PRESC_PRESCALER) - prescaler value is required #endif - valid baud rate value (different from 0) is required - Peripheral clock as returned by RCC service, should be valid (different from 0). */ if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) && (LPUART_InitStruct->BaudRate != 0U)) { status = SUCCESS; LL_LPUART_SetBaudRate(LPUARTx, periphclk, #if defined(USART_PRESC_PRESCALER) LPUART_InitStruct->PrescalerValue, #endif /* USART_PRESC_PRESCALER */ LPUART_InitStruct->BaudRate); /* Check BRR is greater than or equal to 0x300 */ assert_param(IS_LL_LPUART_BRR_MIN(LPUARTx->BRR)); /* Check BRR is lower than or equal to 0xFFFFF */ assert_param(IS_LL_LPUART_BRR_MAX(LPUARTx->BRR)); } #if defined(USART_PRESC_PRESCALER) /*---------------------------- LPUART PRESC Configuration ----------------------- * Configure LPUARTx PRESC (Prescaler) with parameters: * - PrescalerValue: LPUART_PRESC_PRESCALER bits according to LPUART_InitStruct->PrescalerValue value. */ LL_LPUART_SetPrescaler(LPUARTx, LPUART_InitStruct->PrescalerValue); #endif /* USART_PRESC_PRESCALER */ } return (status); } /** * @brief Set each @ref LL_LPUART_InitTypeDef field to default value. * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure * whose fields will be set to default values. * @retval None */ void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct) { /* Set LPUART_InitStruct fields to default values */ #if defined(USART_PRESC_PRESCALER) LPUART_InitStruct->PrescalerValue = LL_LPUART_PRESCALER_DIV1; #endif /* USART_PRESC_PRESCALER */ LPUART_InitStruct->BaudRate = LPUART_DEFAULT_BAUDRATE; LPUART_InitStruct->DataWidth = LL_LPUART_DATAWIDTH_8B; LPUART_InitStruct->StopBits = LL_LPUART_STOPBITS_1; LPUART_InitStruct->Parity = LL_LPUART_PARITY_NONE ; LPUART_InitStruct->TransferDirection = LL_LPUART_DIRECTION_TX_RX; LPUART_InitStruct->HardwareFlowControl = LL_LPUART_HWCONTROL_NONE; } /** * @} */ /** * @} */ /** * @} */ #endif /* LPUART1 */ /** * @} */ #endif /* USE_FULL_LL_DRIVER */