#include "anemometer_dev.h" #include "FreeRTOS.h" #include "filter.h" #include "inflash.h" #include "uart_dev.h" #include "fdacoefs.h" #ifdef ENABLE_FIR_FILTER #define NUM_TAPS 46 const float32_t firCoeffs32LP[NUM_TAPS] = { -0.001119464869,-0.000287396746,-8.360351057e-05,0.0003625267709, 0.001120736357, 0.002262232359, 0.003853877541, 0.005952425767, 0.008596911095, 0.01180436555, 0.01556421723, 0.01983707026, 0.02455105446, 0.02960319445, 0.03486000001, 0.04016984627, 0.04535837471, 0.05024559051, 0.05465414748, 0.0584131442, 0.06137540936, 0.06342063844, 0.06446501613, 0.06446501613, 0.06342063844, 0.06137540936, 0.0584131442, 0.05465414748, 0.05024559051, 0.04535837471, 0.04016984627, 0.03486000001, 0.02960319445, 0.02455105446, 0.01983707026, 0.01556421723, 0.01180436555, 0.008596911095, 0.005952425767, 0.003853877541, 0.002262232359, 0.001120736357,0.0003625267709,-8.360351057e-05,-0.000287396746, -0.001119464869 }; arm_fir_instance_f32 filter_s; float32_t firState[ADC_VAL_LEN+NUM_TAPS-1]; #endif //#define USE_CORRX_GET_DTOF 1 int16_t adc_val[ADC_VAL_LEN]; int16_t adc_val1[ADC_VAL_LEN]; #define AV_SPEED_LEN 10 float32_t speed[AV_SPEED_LEN]={0}; float32_t angle[AV_SPEED_LEN]={0}; float32_t speedx[AV_SPEED_LEN]={0}; float32_t speedy[AV_SPEED_LEN]={0}; uint32_t speedi = 0; float32_t av_speed; float32_t av_angle; float32_t av_speedx= 0; float32_t av_speedy=0; Weather_param weather_info={0x00}; mcs_para g_stMcs_Para={0x00}; void update_mcs_param(float new_wind_speed, float new_wind_dirction); float32_t max_val_f32; int32_t max_val_index_f32; // 多项式插值 // 返回值是最大值 float32_t find_maxVal_by_interpolation(float32_t a,float32_t b,float32_t c) { float32_t d1=0; //到达极值点的时间Xmax d1 = (a-c)/2.0f/(a-2.0f*b+c); return 0.5f*a*d1*(d1-1.0f)-b*(d1-1.0f)*(d1+1.0f)+0.5f*c*d1*(d1+1.0f); } // 余弦插值找最大值所在的位置 // 返回值是相位 float32_t find_maxValPosition_by_sinInterpolation(float32_t a,float32_t b,float32_t c) { // sin 插值 寻找最大值 float32_t w_val,sin_val,y_val; w_val = acosf((a+c)/2.0f/b); sin_val = sinf(w_val); y_val = atanf((a-c)/2.0f/b/sin_val); return (0.0f-y_val)/w_val; } // 删除特定值之后的波形，加强互相关准确性 void remove_aftershocks(q15_t* x,uint32_t len) { q15_t max_val; q15_t dc_offset; float32_t echo_p = 0,echo_dt = 0; uint32_t max_val_p; uint32_t i=0;//stop_position = 0; // 求取平均值 arm_mean_q15(x,20,&dc_offset); // 查找数组中的最大值和最大值所在的索引 arm_max_q15(x,len,&max_val,&max_val_p); max_val = max_val - dc_offset ; uint16_t max_val_zero_1R5 = (max_val*15/100)+dc_offset; // 最大值的0.45倍 uint16_t max_val_zero_4R5 = (max_val*45/100)+dc_offset; // 最大值的0.8倍 uint16_t max_val_zero_8R0 = (max_val*80/100)+dc_offset; //如果最大值位置大于200 则从最大值前200个位置开始寻找起始波形。 // 优化的地方，从最大值位置开始找到达波,可以最大限度排除偶然噪声干扰， // 因为噪声在波形到达出 噪声不是很大 //优化性能，如果不需要则从数组0位置开始寻找其实波形 if(max_val_p>=40) { i = max_val_p-40; }else { i = 0; } // 在最大值前寻找起始波形 for( ; i < max_val_p ; i++) { // 建议判断顶点，但是容易遇到偶然数据异常 类似于 28 29 28 30 29 28这种情况 //if( x[i-1] < x[i] && x[i]> x[i+1] ) // 排除以上数据异常情况，但是有可能就无法检测到30 这个顶点。 // 故需要检测下一个周期的顶点，然后再减去一个周期的时间。 if( x[i-2]=x[i+1] && x[i+1]>x[i+2]) { // // 判断顶点是否在 45% -- 80% 之间 if(x[i] >= max_val_zero_8R0 ) { for(;i= max_val_zero_4R5 && x[i] <= max_val_zero_8R0) { for(i+12;i>1); // fft的数据 // 时域卷积==频域相乘 1024个数据 复数只有512个 arm_cmplx_mult_cmplx_f32(x_fft_O_f32,y_fft_O_f32,cmplx_mul_result_f32,len>>1); // ifft arm_rfft_fast_f32(&s,cmplx_mul_result_f32,corrx_out,1); // //arm_abs_f32(corrx_out,corrx_out,len); arm_max_f32(corrx_out,len,&max_val_f32,(uint32_t*)&max_val_index_f32); b =corrx_out[max_val_index_f32]; if(max_val_index_f32 == 0) { a =corrx_out[len-1]; c =corrx_out[max_val_index_f32+1]; } else if(max_val_index_f32 == len-1) { a =corrx_out[max_val_index_f32-1]; c =corrx_out[0]; }else { a =corrx_out[max_val_index_f32-1]; c =corrx_out[max_val_index_f32+1]; } tof = max_val_index_f32+find_maxValPosition_by_sinInterpolation(a,b,c); // tof = max_val_index_f32; if(tof>len/2) tof= tof-len; return tof; } #endif uint32_t max_point_position[10]; q15_t max_point_val[10]; float cal_tof(q15_t* x,uint32_t len) { q15_t max_val; float32_t echo_p = 0,echo_dt = 0; uint32_t max_val_p; uint32_t i=0;//stop_position = 0; // 记录波形的极大值点和位置 uint32_t cnt =1; // 查找数组中的最大值和最大值所在的索引 arm_max_q15(x,len,&max_val,&max_val_p); max_point_position[0] = max_val_p; max_point_val[0] = max_val; // 大宇换能器参数 开始 // 最大值的0.18倍 uint16_t max_val_zero_1R5 = (max_val*15/100); // 最大值的0.45倍 uint16_t max_val_zero_4R5 = (max_val*45/100); // 最大值的0.8倍 uint16_t max_val_zero_8R0 = (max_val*80/100); // 大宇换能器参数 结束 // // 无锡电声换能器参数 // // 最大值的0.18倍 // uint16_t max_val_zero_1R5 = (max_val*10/100); // // 最大值的0.45倍 // uint16_t max_val_zero_4R5 = (max_val*35/100); // // 最大值的0.8倍 // uint16_t max_val_zero_8R0 = (max_val*65/100); //如果最大值位置大于200 则从最大值前200个位置开始寻找起始波形。 // 优化的地方，从最大值位置开始找到达波,可以最大限度排除偶然噪声干扰， // 因为噪声在波形到达出 噪声不是很大 //优化性能，如果不需要则从数组0位置开始寻找其实波形 if(max_val_p>=70) { i = max_val_p-70; }else { i = 0; } // 在最大值前寻找起始波形 for( ; i < max_val_p ; i++) { // 建议判断顶点，但是容易遇到偶然数据异常 类似于 28 29 28 30 29 28这种情况 //if( x[i-1] < x[i] && x[i]> x[i+1] ) // 排除以上数据异常情况，但是有可能就无法检测到30 这个顶点。 // 故需要检测下一个周期的顶点，然后再减去一个周期的时间。 if( x[i-2]=x[i+1] && x[i+1]>x[i+2]) { max_point_position[cnt] = i; max_point_val[cnt] = x[i]; cnt++; // 减去偏置电压 //temp_val_zero = arr[i]-2048; // 判断顶点是否在 15%-%45之间。 if(x[i] >= max_val_zero_1R5 && x[i] <= max_val_zero_4R5 ) { // 如果找到 函数退出 echo_dt = (x[i-1]-x[i+1])/2.0/(x[i-1]-2*x[i]+x[i+1]); echo_dt = find_maxValPosition_by_sinInterpolation(x[i-1],x[i],x[i+1]); echo_p = (float32_t)i+echo_dt-0*(float32_t)(ADC_SAMP_RATE_MHz/DRIVE_FREQ_MHz); return echo_p; } // 如果15% ~45%之间的数据未找到，则找45-80%的顶点。 // 判断顶点是否在 45% -- 80% 之间 if(x[i] >= max_val_zero_4R5 && x[i] <= max_val_zero_8R0) { // 如果找到 函数推出 echo_dt = (x[i-1]-x[i+1])/2.0/(x[i-1]-2*x[i]+x[i+1]); echo_dt = find_maxValPosition_by_sinInterpolation(x[i-1],x[i],x[i+1]); // 换算成第二个顶点的位置。 echo_p = (float32_t)i+echo_dt - 1*(float32_t)(ADC_SAMP_RATE_MHz/DRIVE_FREQ_MHz); return echo_p; } } } term_printf("bad wave of echo signal \r\n"); // term_printf("maxVal:%d,maxValP:%d \r\n",max_point_val[0],max_point_position[0]); // for(cnt = 1 ;cnt<9;cnt++) // { // term_printf("mV:%d,mP:%d,%d %% \r\n",max_point_val[i],max_point_position[i],(uint32_t)((max_point_val[i]*1.0f)/max_point_val[0]*100.0f)); // } return 0; } /* C B A 0 0 0 X0 0 0 1 X1 0 1 0 X2 0 1 1 X3 1 0 0 X4 1 0 1 X5 */ void change_channel(uint32_t channel) { // 复位全部通道IO HAL_GPIO_WritePin(GPIOC, GPIO_PWM_C_Pin|GPIO_PWM_B_Pin|GPIO_PWM_A_Pin, GPIO_PIN_RESET); HAL_GPIO_WritePin(GPIOC, GPIO_RX_A_Pin|GPIO_RX_B_Pin|GPIO_RX_C_Pin, GPIO_PIN_RESET); switch(channel) { case 0x01: // N tx S rx //HAL_GPIO_WritePin(GPIOC, GPIO_RX_A_Pin, GPIO_PIN_SET); // 接收通道 HAL_GPIO_WritePin(GPIOC, GPIO_RX_A_Pin, GPIO_PIN_SET); break; case 0x02: // N rx S tx HAL_GPIO_WritePin(GPIOC, GPIO_PWM_A_Pin, GPIO_PIN_SET); HAL_GPIO_WritePin(GPIOC, GPIO_RX_B_Pin, GPIO_PIN_SET); break; case 0x03: // W tx E rx HAL_GPIO_WritePin(GPIOC, GPIO_PWM_B_Pin, GPIO_PIN_SET); HAL_GPIO_WritePin(GPIOC, GPIO_RX_A_Pin|GPIO_RX_B_Pin, GPIO_PIN_SET); break; case 0x04: // W rx E tx HAL_GPIO_WritePin(GPIOC, GPIO_PWM_A_Pin|GPIO_PWM_B_Pin, GPIO_PIN_SET); //HAL_GPIO_WritePin(GPIOC, GPIO_RX_A_Pin, GPIO_PIN_SET); break; } } void play_one_measure(int16_t* result_data,uint32_t len) { // 重新初始化PWM定时器 MX_TIM15_Init(); //MX_TIM6_Init(); // adc驱动定时器,保证每次使用前处于停止状态 HAL_TIM_Base_Stop(&htim6); // 计数器复位 __HAL_TIM_SET_COUNTER(&htim6,0); // 校准adc //HAL_ADCEx_Calibration_Start(&hadc1,ADC_SINGLE_ENDED); // adc dma初始化 HAL_ADC_Start_DMA(&hadc1,(uint32_t *)result_data,len); //禁止全局中断 // 停止定时器 __HAL_TIM_DISABLE(&htim7); // 重置计数器 __HAL_TIM_SET_COUNTER(&htim7,0); __set_PRIMASK(1); // 发送超声波驱动信号 HAL_TIM_PWM_Start(&htim15,TIM_CHANNEL_1); // 延时 REV_MUTE_DELAY us //HAL_GPIO_WritePin(GPIOC,GPIO_ACK_LED_Pin,0); // 启定时器 __HAL_TIM_ENABLE(&htim7); // 等待定时到达 while(__HAL_TIM_GET_COUNTER(&htim7) 2.0f) { parm->wind_c = DISTANCE/2.0f*(1.0f/tofx+1.0f/tofy); return; } // 富奥通结构 L = 118946 // 新结构 L = 115960 parm->wind_c = DISTANCE/2.0f*(1.0f/tofx+1.0f/tofy); // v = L*dtof/2/tofx/tofy/cos if(direction == WIND_DIRECTION_X) parm->wind_velocity_x = DISTANCE*dtof/1.41422f/tofx/tofx; else parm->wind_velocity_y = DISTANCE*dtof/1.41422f/tofx/tofx; } //#define UPDATA_FROM_SERIAL_PORT 1 //#define DEBUG_TOF_ERR 1 float32_t tofx,tofx1,tofy1,tofy,dtof,c_dtof; char str[100]; void calculate_tof_dtof_param(Weather_param *parm ,uint32_t direction , int16_t *adc_buf1,int16_t *adc_buf2,uint32_t len) { int16_t dc_offset1,dc_offset2;//信号的直流偏置 // 计算直流分量 因为数据前端是没有回波的 计算50个数据求平均值 获取直流分量 arm_mean_q15(adc_buf1,50,&dc_offset1); arm_mean_q15(adc_buf2,50,&dc_offset2); // 信号减去直流分量 arm_offset_q15(adc_buf1,-dc_offset1,adc_buf1,len); arm_offset_q15(adc_buf2,-dc_offset2,adc_buf2,len); // 上传波形到上位机 #ifdef UPDATA_FROM_SERIAL_PORT uint32_t num = len; uart_dev_write(g_term_uart_handle,"x",1); uart_dev_write(g_term_uart_handle,(uint8_t*)&num,4); uart_dev_write(g_term_uart_handle,(uint8_t*)adc_buf1,2*len); uart_dev_write(g_term_uart_handle,"\r\n",strlen("\r\n")); uart_dev_write(g_term_uart_handle,"y",1); uart_dev_write(g_term_uart_handle,(uint8_t*)&len,4); uart_dev_write(g_term_uart_handle,(uint8_t*)adc_buf2,2*len); uart_dev_write(g_term_uart_handle,"\r\n",strlen("\r\n")); #endif tofx = cal_tof(adc_buf1,len)/ADC_SAMP_RATE_MHz+REV_MUTE_DELAY_US-1.0f/DRIVE_FREQ_MHz; tofy = cal_tof(adc_buf2,len)/ADC_SAMP_RATE_MHz+REV_MUTE_DELAY_US-1.0f/DRIVE_FREQ_MHz; //remove_aftershocks(adc_buf1,len); //remove_aftershocks(adc_buf2,len); #ifdef ENABLE_FIR_FILTER // 波形取绝对值 arm_abs_q15(adc_buf1,adc_buf1,len); arm_abs_q15(adc_buf2,adc_buf2,len); // 提取包络线 低通滤波器 -3db 50khz -40db 150khz arm_q15_to_float(adc_buf1,x_buf,len); arm_q15_to_float(adc_buf2,y_buf,len); arm_fir_init_f32(&filter_s,NUM_TAPS,(float32_t *)&firCoeffs32LP[0],&firState[0],len); arm_fir_f32(&filter_s,x_buf,x_buf,len); arm_fir_f32(&filter_s,y_buf,y_buf,len); arm_float_to_q15(x_buf,adc_buf1,len); arm_float_to_q15(y_buf,adc_buf2,len); #endif #ifdef USE_CORRX_GET_DTOF // 通过互相关算法计算时间差 dtof = cal_dtof(adc_buf1,adc_buf2,len)/ADC_SAMP_RATE_MHz; #else // 通过各通道渡越时间求时间差 dtof = tofx-tofy; #endif parm->wind_c = DISTANCE/2.0f*(1.0f/tofx+1.0f/tofy); // v = L*dtof/2/tofx/tofy/cos if(direction == WIND_DIRECTION_X) { parm->wind_velocity_x = 0-DISTANCE*dtof/1.41422f/tofx/tofx; //parm->wind_velocity_x = DISTANCE*c_dtof/1.41422/tofx/tofx; } else { parm->wind_velocity_y = DISTANCE*dtof/1.41422f/tofx/tofx; //parm->wind_velocity_y = DISTANCE*c_dtof/1.41422/tofx/tofx; } } void wind_task(void const * argument) { /* USER CODE BEGIN wind_task */ /* Infinite loop */ //U_DataType wind_speed_data[20]; //U_DataType wind_direcion_data[20]; //int cnt=0; int flag_init_msc_value = 1; for(;;) { __HAL_TIM_DISABLE(&htim16); // 采集X轴风速耗时 22ms，两轴采集完44ms __HAL_TIM_SET_COUNTER(&htim16,0); // 开启定时器 __HAL_TIM_ENABLE(&htim16); // 通道1 通道2 测试南北风速 // 通道1发送 通道2接收 change_channel(0x01); // 等待通道切换稳定 // adc开启采集数据有个固定的延时,这里取消等待 //HAL_Delay(0); // 发送pwm 并启动adc采集数据 play_one_measure(adc_val,ADC_VAL_LEN); //HAL_Delay(5); osDelay(1); // 通道2发送 通道1接收 change_channel(0x02); // 等待通道切换稳定 //HAL_Delay(0); // 发送pwm 并启动adc采集数据 play_one_measure(adc_val1,ADC_VAL_LEN); //calculate_param(&weather_info,WIND_DIRECTION_X,adc_val,adc_val1,ADC_VAL_LEN); calculate_tof_dtof_param(&weather_info,WIND_DIRECTION_X,adc_val,adc_val1,ADC_VAL_LEN); // if(weather_info.wind_velocity_x > 2.0 ) // { // term_printf("err \r\n"); // } // 通道3 通道4 测试东西风速 // 通道3发送 通道4接收 change_channel(0x03); // 等待通道切换稳定 //HAL_Delay(0); // 发送pwm 并启动adc采集数据 play_one_measure(adc_val,ADC_VAL_LEN); //HAL_Delay(5); osDelay(1); // 通道4发送 通道3接收 change_channel(0x04); // 等待通道切换稳定 //HAL_Delay(0); // 发送pwm 并启动adc采集数据 play_one_measure(adc_val1,ADC_VAL_LEN); //calculate_param(&weather_info,WIND_DIRECTION_Y,adc_val,adc_val1,ADC_VAL_LEN); calculate_tof_dtof_param(&weather_info,WIND_DIRECTION_Y,adc_val,adc_val1,ADC_VAL_LEN); weather_info.wind_velocity = sqrtf(weather_info.wind_velocity_x*weather_info.wind_velocity_x + weather_info.wind_velocity_y*weather_info.wind_velocity_y); // 分母加0.0001 保证分母不为0 weather_info.wind_angle = acosf(weather_info.wind_velocity_x/(weather_info.wind_velocity+0.0001)); // 关闭定时器 __HAL_TIM_DISABLE(&htim16); speedx[speedi] = weather_info.wind_velocity_x; speedy[speedi] = weather_info.wind_velocity_y; speed[speedi] = weather_info.wind_velocity; angle[speedi++] = weather_info.wind_angle*180/PI; if(speedi>=AV_SPEED_LEN) { speedi=0; arm_mean_f32(speedx,AV_SPEED_LEN,&av_speedx); arm_mean_f32(speedy,AV_SPEED_LEN,&av_speedy); av_speed = sqrtf(av_speedx*av_speedx + av_speedy*av_speedy); av_angle = acosf(av_speedx/(av_speed+0.00000001))/2/PI*360; if(av_speedy<0) av_angle = 360-av_angle; if(fabs(av_speed)<0.1) { av_speed = 0; av_angle = 0; } // arm_mean_f32(speed,AV_SPEED_LEN,&av_speed); // arm_mean_f32(angle,AV_SPEED_LEN,&av_angle); ///term_printf("x:%.2f y:%.2f win_speed %.2f m/s angle %.2f \r\n",av_speedx,av_speedy,av_speed,av_angle); } ///term_printf("win_speed %.2f \r\n",weather_info.wind_velocity); //HAL_Delay(1); //osDelay(3// //kan ni osDelay(6); #if 0 if(cnt < 10){ wind_speed_data[cnt].fValue = weather_info.wind_c; wind_direcion_data[cnt].fValue = weather_info.wind_velocity; cnt++; }else{ cnt=0; U_DataType tmp_wind_speed_value = filter_middle(wind_speed_data,10, FILTER_DATA_TYPE_FLOAT); U_DataType tmp_wind_direction_value = filter_middle(wind_direcion_data,10, FILTER_DATA_TYPE_FLOAT); update_mcs_param(tmp_wind_speed_value.fValue, tmp_wind_direction_value.fValue); } #endif osDelay(38); if(flag_init_msc_value== 1){ flag_init_msc_value = 0; g_stMcs_Para.min_wind_direction = weather_info.wind_c; g_stMcs_Para.average_wind_direction = weather_info.wind_c; g_stMcs_Para.max_wind_direction = 0; g_stMcs_Para.min_wind_speed = weather_info.wind_velocity; g_stMcs_Para.average_wind_speed = weather_info.wind_velocity; g_stMcs_Para.max_wind_speed = 0; } update_mcs_param(weather_info.wind_velocity, weather_info.wind_c); } /* USER CODE END wind_task */ } /* 更新微气象站气象数据 */ /* 风向、风向瞬时值：3s的滑动平均值，以1s为步长 * 风速、风向平均值：以1min为步长，求xx分钟的滑动平均值，默认10分钟平均风速风向 * 最大风速、风向：从10min平均风速中选取； */ #define K_3S (3*1/3) #define K_1MIN (3*3/60) #define K_10MIN (3*60/600) int time_1s=0,time_11s=0,time_111s=0; int flag_time_1s=0,flag_time_3s=0,flag_time_1min=0,flag_time_10min=0; float Yn_sp_3s_average_value=0.0,Yn_1_sp_3s_average_value=0.0,yn_3s_sp_value=0.0; float Yn_sp_1min_average_value=0.0,Yn_1_sp_1min_average_value=0.0,yn_1min_sp_value=0.0; float Yn_sp_10min_average_value=0.0,Yn_1_sp_10min_average_value; float Yn_dir_3s_average_value=0.0,Yn_1_dir_3s_average_value=0.0,yn_3s_dir_value=0.0; float Yn_dir_1min_average_value=0.0,Yn_1_dir_1min_average_value=0.0,yn_1min_dir_value=0.0;; float Yn_dir_10min_average_value=0.0,Yn_1_dir_10min_average_value; float max_speed_value=0.0,max_direction_value=0.0,min_speed_value,min_direction_value=0.0; void update_mcs_param(float new_wind_speed, float new_wind_dirction) { static int flag1=0; static int flag11=0; static int flag111=0; time_1s++; if(time_1s==3){ time_1s=0; flag_time_3s=1; } time_11s++; if(time_11s==20){ time_11s=0; flag_time_1min=1; } time_111s++; if(time_111s==g_stConfigInfo.speed_average_time*60){ time_111s=0; flag_time_10min = 1; } /* 以1s为步长，计算3s风速风向滑动平均值 */ flag_time_1s=1; if(flag_time_1s){ if(flag1 ==0){ Yn_1_sp_3s_average_value = new_wind_speed; Yn_1_dir_3s_average_value=new_wind_dirction; flag1=1; } //flag_time_1s=0; Yn_sp_3s_average_value = K_3S*(new_wind_speed - Yn_1_sp_3s_average_value) + Yn_1_sp_3s_average_value; Yn_1_sp_3s_average_value = Yn_sp_3s_average_value; Yn_dir_3s_average_value = K_3S*(new_wind_dirction - Yn_1_dir_3s_average_value) + Yn_1_dir_3s_average_value; Yn_1_dir_3s_average_value = Yn_dir_3s_average_value; } /* 以3s为步长，计算1min滑动平均风速 */ if(flag_time_3s){ if(flag11 ==0){ Yn_1_sp_1min_average_value = Yn_sp_3s_average_value; Yn_1_dir_1min_average_value = Yn_dir_3s_average_value; flag11=1; } flag_time_3s=0; Yn_sp_1min_average_value = K_1MIN*(Yn_sp_3s_average_value - Yn_1_sp_1min_average_value) + Yn_1_sp_1min_average_value; Yn_1_sp_1min_average_value = Yn_sp_1min_average_value; Yn_dir_1min_average_value = K_1MIN*(Yn_dir_3s_average_value - Yn_1_dir_1min_average_value) + Yn_1_dir_1min_average_value; //Yn_1_dir_1min_average_value = Yn_dir_1min_averの‘dvv,f;age_value; } /* 以1min为步长，计算10min滑动平均风速 */ if(flag_time_1min){ if(flag111 ==0){ Yn_1_sp_10min_average_value = Yn_sp_1min_average_value; Yn_1_dir_10min_average_value = Yn_dir_1min_average_value; flag111=1; } flag_time_1min = 0; Yn_sp_10min_average_value = K_10MIN*(Yn_sp_1min_average_value - Yn_1_sp_10min_average_value) + Yn_1_sp_10min_average_value; Yn_1_sp_10min_average_value = Yn_sp_10min_average_value; Yn_dir_10min_average_value = K_10MIN*(Yn_dir_1min_average_value - Yn_1_dir_10min_average_value) + Yn_1_dir_10min_average_value; Yn_1_dir_10min_average_value = Yn_dir_10min_average_value; } /* 统计最大风速风向，及平均风速 */ if(flag_time_10min){ flag_time_10min = 0; if(max_direction_value < Yn_dir_10min_average_value){ max_direction_value = Yn_dir_10min_average_value; } if(min_direction_value > Yn_dir_10min_average_value){ min_direction_value = Yn_dir_10min_average_value; } if(max_speed_value < Yn_sp_10min_average_value){ max_speed_value = Yn_sp_10min_average_value; } if(min_speed_value > Yn_sp_10min_average_value){ min_speed_value = Yn_sp_10min_average_value; } g_stMcs_Para.min_wind_direction = min_direction_value; g_stMcs_Para.average_wind_direction = Yn_dir_10min_average_value; g_stMcs_Para.max_wind_direction = max_direction_value; g_stMcs_Para.min_wind_speed = min_speed_value; g_stMcs_Para.average_wind_speed = Yn_sp_10min_average_value; g_stMcs_Para.max_wind_speed = max_speed_value; } }