483 lines
20 KiB
C
483 lines
20 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l4xx_hal_opamp.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of OPAMP HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32L4xx_HAL_OPAMP_H
|
|
#define STM32L4xx_HAL_OPAMP_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32L4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup OPAMP
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief OPAMP Init structure definition
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
uint32_t PowerSupplyRange; /*!< Specifies the power supply range: above or under 2.4V.
|
|
This parameter must be a value of @ref OPAMP_PowerSupplyRange
|
|
Caution: This parameter is common to all OPAMP instances: a modification of this parameter for the selected OPAMP impacts the other OPAMP instances. */
|
|
|
|
uint32_t PowerMode; /*!< Specifies the power mode Normal or Low-Power.
|
|
This parameter must be a value of @ref OPAMP_PowerMode */
|
|
|
|
uint32_t Mode; /*!< Specifies the OPAMP mode
|
|
This parameter must be a value of @ref OPAMP_Mode
|
|
mode is either Standalone, - Follower or PGA */
|
|
|
|
uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone & PGA modes
|
|
- In Standalone mode: i.e. when mode is OPAMP_STANDALONE_MODE
|
|
& PGA mode: i.e. when mode is OPAMP_PGA_MODE
|
|
This parameter must be a value of @ref OPAMP_InvertingInput
|
|
- In Follower mode i.e. when mode is OPAMP_FOLLOWER_MODE
|
|
This parameter is Not Applicable */
|
|
|
|
uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp:
|
|
This parameter must be a value of @ref OPAMP_NonInvertingInput */
|
|
|
|
uint32_t PgaGain; /*!< Specifies the gain in PGA mode
|
|
i.e. when mode is OPAMP_PGA_MODE.
|
|
This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */
|
|
|
|
uint32_t UserTrimming; /*!< Specifies the trimming mode
|
|
This parameter must be a value of @ref OPAMP_UserTrimming
|
|
UserTrimming is either factory or user trimming.*/
|
|
|
|
uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS)
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31
|
|
16 is typical default value */
|
|
|
|
uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS)
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31
|
|
16 is typical default value */
|
|
|
|
uint32_t TrimmingValuePLowPower; /*!< Specifies the offset trimming value (PMOS)
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31
|
|
16 is typical default value */
|
|
|
|
uint32_t TrimmingValueNLowPower; /*!< Specifies the offset trimming value (NMOS)
|
|
i.e. when UserTrimming is OPAMP_TRIMMING_USER.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 31
|
|
16 is typical default value */
|
|
|
|
}OPAMP_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL State structures definition
|
|
*/
|
|
|
|
typedef enum
|
|
{
|
|
HAL_OPAMP_STATE_RESET = 0x00000000, /*!< OPAMP is not yet Initialized */
|
|
|
|
HAL_OPAMP_STATE_READY = 0x00000001, /*!< OPAMP is initialized and ready for use */
|
|
HAL_OPAMP_STATE_CALIBBUSY = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */
|
|
|
|
HAL_OPAMP_STATE_BUSY = 0x00000004, /*!< OPAMP is enabled and running in normal mode */
|
|
HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005 /*!< OPAMP is locked
|
|
only system reset allows reconfiguring the opamp. */
|
|
|
|
}HAL_OPAMP_StateTypeDef;
|
|
|
|
/**
|
|
* @brief OPAMP Handle Structure definition
|
|
*/
|
|
|
|
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
|
|
typedef struct __OPAMP_HandleTypeDef
|
|
#else
|
|
typedef struct
|
|
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
|
|
{
|
|
OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */
|
|
OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */
|
|
HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */
|
|
HAL_LockTypeDef Lock; /*!< Locking object */
|
|
__IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */
|
|
|
|
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
|
|
void (* MspInitCallback) (struct __OPAMP_HandleTypeDef *hopamp);
|
|
void (* MspDeInitCallback) (struct __OPAMP_HandleTypeDef *hopamp);
|
|
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
|
|
|
|
}OPAMP_HandleTypeDef;
|
|
|
|
/**
|
|
* @brief HAl_OPAMP_TrimmingValueTypeDef definition
|
|
*/
|
|
|
|
typedef uint32_t HAL_OPAMP_TrimmingValueTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief HAL OPAMP Callback ID enumeration definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_OPAMP_MSPINIT_CB_ID = 0x01U, /*!< OPAMP MspInit Callback ID */
|
|
HAL_OPAMP_MSPDEINIT_CB_ID = 0x02U, /*!< OPAMP MspDeInit Callback ID */
|
|
HAL_OPAMP_ALL_CB_ID = 0x03U /*!< OPAMP All ID */
|
|
}HAL_OPAMP_CallbackIDTypeDef;
|
|
|
|
/**
|
|
* @brief HAL OPAMP Callback pointer definition
|
|
*/
|
|
typedef void (*pOPAMP_CallbackTypeDef)(OPAMP_HandleTypeDef *hopamp);
|
|
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
|
|
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup OPAMP_Mode OPAMP Mode
|
|
* @{
|
|
*/
|
|
#define OPAMP_STANDALONE_MODE 0x00000000U /*!< standalone mode */
|
|
#define OPAMP_PGA_MODE OPAMP_CSR_OPAMODE_1 /*!< PGA mode */
|
|
#define OPAMP_FOLLOWER_MODE OPAMP_CSR_OPAMODE /*!< follower mode */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
|
|
* @{
|
|
*/
|
|
|
|
#define OPAMP_NONINVERTINGINPUT_IO0 0x00000000U /*!< OPAMP non-inverting input connected to dedicated IO pin */
|
|
#define OPAMP_NONINVERTINGINPUT_DAC_CH OPAMP_CSR_VPSEL /*!< OPAMP non-inverting input connected internally to DAC channel */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
|
|
* @{
|
|
*/
|
|
|
|
#define OPAMP_INVERTINGINPUT_IO0 0x00000000U /*!< OPAMP inverting input connected to dedicated IO pin low-leakage */
|
|
#define OPAMP_INVERTINGINPUT_IO1 OPAMP_CSR_VMSEL_0 /*!< OPAMP inverting input connected to alternative IO pin available on some device packages */
|
|
#define OPAMP_INVERTINGINPUT_CONNECT_NO OPAMP_CSR_VMSEL_1 /*!< OPAMP inverting input not connected externally (PGA mode only) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
|
|
* @{
|
|
*/
|
|
|
|
#define OPAMP_PGA_GAIN_2 0x00000000U /*!< PGA gain = 2 */
|
|
#define OPAMP_PGA_GAIN_4 OPAMP_CSR_PGGAIN_0 /*!< PGA gain = 4 */
|
|
#define OPAMP_PGA_GAIN_8 OPAMP_CSR_PGGAIN_1 /*!< PGA gain = 8 */
|
|
#define OPAMP_PGA_GAIN_16 (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1) /*!< PGA gain = 16 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_PowerMode OPAMP PowerMode
|
|
* @{
|
|
*/
|
|
#define OPAMP_POWERMODE_NORMALPOWER 0x00000000U /*!< OPAMP power mode normal */
|
|
#define OPAMP_POWERMODE_LOWPOWER OPAMP_CSR_OPALPM /*!< OPAMP power mode low-power */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_PowerSupplyRange OPAMP PowerSupplyRange
|
|
* @{
|
|
*/
|
|
#define OPAMP_POWERSUPPLY_LOW 0x00000000U /*!< Power supply range low (VDDA lower than 2.4V) */
|
|
#define OPAMP_POWERSUPPLY_HIGH OPAMP1_CSR_OPARANGE /*!< Power supply range high (VDDA higher than 2.4V) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
|
|
* @{
|
|
*/
|
|
#define OPAMP_TRIMMING_FACTORY 0x00000000U /*!< Factory trimming */
|
|
#define OPAMP_TRIMMING_USER OPAMP_CSR_USERTRIM /*!< User trimming */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
|
|
* @{
|
|
*/
|
|
#define OPAMP_FACTORYTRIMMING_DUMMY 0xFFFFFFFFU /*!< Dummy value if trimming value could not be retrieved */
|
|
#define OPAMP_FACTORYTRIMMING_N 0U /*!< Offset trimming N */
|
|
#define OPAMP_FACTORYTRIMMING_P 1U /*!< Offset trimming P */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup OPAMP_Private_Constants OPAMP Private Constants
|
|
* @brief OPAMP Private constants and defines
|
|
* @{
|
|
*/
|
|
|
|
/* NONINVERTING bit position in OTR & LPOTR */
|
|
#define OPAMP_INPUT_NONINVERTING ((uint32_t) 8) /*!< Non inverting input */
|
|
|
|
/* Offset trimming time: during calibration, minimum time needed between two */
|
|
/* steps to have 1 mV accuracy. */
|
|
/* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=1ms.*/
|
|
/* Unit: ms. */
|
|
#define OPAMP_TRIMMING_DELAY ((uint32_t) 1)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Reset OPAMP handle state.
|
|
* @param __HANDLE__ OPAMP handle.
|
|
* @retval None
|
|
*/
|
|
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
|
|
#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) do { \
|
|
(__HANDLE__)->State = HAL_OPAMP_STATE_RESET; \
|
|
(__HANDLE__)->MspInitCallback = NULL; \
|
|
(__HANDLE__)->MspDeInitCallback = NULL; \
|
|
} while(0)
|
|
#else
|
|
#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
|
|
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
|
|
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
|
|
/** @defgroup OPAMP_Private_Macros OPAMP Private Macros
|
|
* @{
|
|
*/
|
|
|
|
#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
|
|
((INPUT) == OPAMP_PGA_MODE) || \
|
|
((INPUT) == OPAMP_FOLLOWER_MODE))
|
|
|
|
#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \
|
|
defined (STM32L496xx) || defined (STM32L4A6xx) || \
|
|
defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \
|
|
defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx)
|
|
#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
|
|
((INPUT) == OPAMP_INVERTINGINPUT_IO1))
|
|
#endif /* STM32L471xx STM32L475xx STM32L476xx STM32L485xx STM32L486xx */
|
|
/* STM32L496xx STM32L4A6xx */
|
|
/* STM32L4P5xx STM32L4Q5xx */
|
|
/* STM32L4R5xx STM32L4R7xx STM32L4R9xx STM32L4S5xx STM32L4S7xx STM32L4S9xx */
|
|
|
|
#if defined (STM32L412xx) || defined (STM32L422xx) || \
|
|
defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \
|
|
defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx)
|
|
#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) ((INPUT) == OPAMP_INVERTINGINPUT_IO0)
|
|
#endif /* STM32L412xx STM32L422xx */
|
|
/* STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx */
|
|
/* STM32L451xx STM32L452xx STM32L462xx */
|
|
|
|
#if defined (STM32L412xx) || defined (STM32L422xx)
|
|
#define IS_OPAMP_NONINVERTING_INPUT(INPUT) ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0)
|
|
#endif /* STM32L412xx STM32L422xx */
|
|
|
|
#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \
|
|
defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \
|
|
defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \
|
|
defined (STM32L496xx) || defined (STM32L4A6xx) || \
|
|
defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \
|
|
defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx)
|
|
#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
|
|
((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH))
|
|
#endif /* STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx */
|
|
/* STM32L451xx STM32L452xx STM32L462xx */
|
|
/* STM32L471xx STM32L475xx STM32L476xx STM32L485xx STM32L486xx */
|
|
/* STM32L496xx STM32L4A6xx */
|
|
/* STM32L4P5xx STM32L4Q5xx */
|
|
/* STM32L4R5xx STM32L4R7xx STM32L4R9xx STM32L4S5xx STM32L4S7xx STM32L4S9xx */
|
|
|
|
#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \
|
|
defined (STM32L496xx) || defined (STM32L4A6xx) || \
|
|
defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \
|
|
defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx)
|
|
#define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
|
|
((INPUT) == OPAMP_INVERTINGINPUT_IO1) || \
|
|
((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO))
|
|
#endif /* STM32L471xx STM32L475xx STM32L476xx STM32L485xx STM32L486xx */
|
|
/* STM32L496xx STM32L4A6xx */
|
|
/* STM32L4P5xx STM32L4Q5xx */
|
|
/* STM32L4R5xx STM32L4R7xx STM32L4R9xx STM32L4S5xx STM32L4S7xx STM32L4S9xx */
|
|
|
|
#if defined (STM32L412xx) || defined (STM32L422xx) || \
|
|
defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \
|
|
defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx)
|
|
#define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
|
|
((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO))
|
|
#endif /* STM32L412xx STM32L422xx */
|
|
/* STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx */
|
|
/* STM32L451xx STM32L452xx STM32L462xx */
|
|
|
|
#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
|
|
((GAIN) == OPAMP_PGA_GAIN_4) || \
|
|
((GAIN) == OPAMP_PGA_GAIN_8) || \
|
|
((GAIN) == OPAMP_PGA_GAIN_16))
|
|
|
|
#define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMALPOWER) || \
|
|
((TRIMMING) == OPAMP_POWERMODE_LOWPOWER) )
|
|
|
|
#define IS_OPAMP_POWER_SUPPLY_RANGE(RANGE) (((RANGE) == OPAMP_POWERSUPPLY_LOW) || \
|
|
((RANGE) == OPAMP_POWERSUPPLY_HIGH) )
|
|
|
|
#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
|
|
((TRIMMING) == OPAMP_TRIMMING_USER))
|
|
|
|
|
|
#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 31U)
|
|
|
|
#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
|
|
((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include OPAMP HAL Extended module */
|
|
#include "stm32l4xx_hal_opamp_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup OPAMP_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup OPAMP_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
/* Initialization/de-initialization functions **********************************/
|
|
HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
|
|
HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
|
|
void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
|
|
void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup OPAMP_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
|
|
/* I/O operation functions *****************************************************/
|
|
HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
|
|
HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
|
|
HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup OPAMP_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
|
|
/* Peripheral Control functions ************************************************/
|
|
#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
|
|
/* OPAMP callback registering/unregistering */
|
|
HAL_StatusTypeDef HAL_OPAMP_RegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackID, pOPAMP_CallbackTypeDef pCallback);
|
|
HAL_StatusTypeDef HAL_OPAMP_UnRegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackID);
|
|
#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
|
|
|
|
HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
|
|
HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup OPAMP_Exported_Functions_Group4
|
|
* @{
|
|
*/
|
|
|
|
/* Peripheral State functions **************************************************/
|
|
HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* STM32L4xx_HAL_OPAMP_H */
|