1723 lines
46 KiB
C
1723 lines
46 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l4xx_hal_hcd.c
|
|
* @author MCD Application Team
|
|
* @brief HCD HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the USB Peripheral Controller:
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral Control functions
|
|
* + Peripheral State functions
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
(#)Declare a HCD_HandleTypeDef handle structure, for example:
|
|
HCD_HandleTypeDef hhcd;
|
|
|
|
(#)Fill parameters of Init structure in HCD handle
|
|
|
|
(#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...)
|
|
|
|
(#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
|
|
(##) Enable the HCD/USB Low Level interface clock using the following macros
|
|
(+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
|
(##) Initialize the related GPIO clocks
|
|
(##) Configure HCD pin-out
|
|
(##) Configure HCD NVIC interrupt
|
|
|
|
(#)Associate the Upper USB Host stack to the HAL HCD Driver:
|
|
(##) hhcd.pData = phost;
|
|
|
|
(#)Enable HCD transmission and reception:
|
|
(##) HAL_HCD_Start();
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l4xx_hal.h"
|
|
|
|
/** @addtogroup STM32L4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_HCD_MODULE_ENABLED
|
|
#if defined (USB_OTG_FS)
|
|
|
|
/** @defgroup HCD HCD
|
|
* @brief HCD HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @defgroup HCD_Private_Functions HCD Private Functions
|
|
* @{
|
|
*/
|
|
static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
|
|
static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
|
|
static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
|
|
static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup HCD_Exported_Functions HCD Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to:
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initialize the host driver.
|
|
* @param hhcd HCD handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
USB_OTG_GlobalTypeDef *USBx;
|
|
|
|
/* Check the HCD handle allocation */
|
|
if (hhcd == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
|
|
|
|
USBx = hhcd->Instance;
|
|
|
|
if (hhcd->State == HAL_HCD_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hhcd->Lock = HAL_UNLOCKED;
|
|
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->SOFCallback = HAL_HCD_SOF_Callback;
|
|
hhcd->ConnectCallback = HAL_HCD_Connect_Callback;
|
|
hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback;
|
|
hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback;
|
|
hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback;
|
|
hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback;
|
|
|
|
if (hhcd->MspInitCallback == NULL)
|
|
{
|
|
hhcd->MspInitCallback = HAL_HCD_MspInit;
|
|
}
|
|
|
|
/* Init the low level hardware */
|
|
hhcd->MspInitCallback(hhcd);
|
|
#else
|
|
/* Init the low level hardware : GPIO, CLOCK, NVIC... */
|
|
HAL_HCD_MspInit(hhcd);
|
|
#endif /* (USE_HAL_HCD_REGISTER_CALLBACKS) */
|
|
}
|
|
|
|
hhcd->State = HAL_HCD_STATE_BUSY;
|
|
|
|
/* Disable DMA mode for FS instance */
|
|
if ((USBx->CID & (0x1U << 8)) == 0U)
|
|
{
|
|
hhcd->Init.dma_enable = 0U;
|
|
}
|
|
|
|
/* Disable the Interrupts */
|
|
__HAL_HCD_DISABLE(hhcd);
|
|
|
|
/* Init the Core (common init.) */
|
|
(void)USB_CoreInit(hhcd->Instance, hhcd->Init);
|
|
|
|
/* Force Host Mode*/
|
|
(void)USB_SetCurrentMode(hhcd->Instance, USB_HOST_MODE);
|
|
|
|
/* Init Host */
|
|
(void)USB_HostInit(hhcd->Instance, hhcd->Init);
|
|
|
|
hhcd->State = HAL_HCD_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize a host channel.
|
|
* @param hhcd HCD handle
|
|
* @param ch_num Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @param epnum Endpoint number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @param dev_address Current device address
|
|
* This parameter can be a value from 0 to 255
|
|
* @param speed Current device speed.
|
|
* This parameter can be one of these values:
|
|
* HCD_DEVICE_SPEED_FULL: Full speed mode,
|
|
* HCD_DEVICE_SPEED_LOW: Low speed mode
|
|
* @param ep_type Endpoint Type.
|
|
* This parameter can be one of these values:
|
|
* EP_TYPE_CTRL: Control type,
|
|
* EP_TYPE_ISOC: Isochronous type,
|
|
* EP_TYPE_BULK: Bulk type,
|
|
* EP_TYPE_INTR: Interrupt type
|
|
* @param mps Max Packet Size.
|
|
* This parameter can be a value from 0 to32K
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num, uint8_t epnum,
|
|
uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps)
|
|
{
|
|
HAL_StatusTypeDef status;
|
|
uint32_t HCcharMps = mps;
|
|
|
|
__HAL_LOCK(hhcd);
|
|
hhcd->hc[ch_num].do_ping = 0U;
|
|
hhcd->hc[ch_num].dev_addr = dev_address;
|
|
hhcd->hc[ch_num].ch_num = ch_num;
|
|
hhcd->hc[ch_num].ep_type = ep_type;
|
|
hhcd->hc[ch_num].ep_num = epnum & 0x7FU;
|
|
|
|
(void)HAL_HCD_HC_ClearHubInfo(hhcd, ch_num);
|
|
|
|
if ((epnum & 0x80U) == 0x80U)
|
|
{
|
|
hhcd->hc[ch_num].ep_is_in = 1U;
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[ch_num].ep_is_in = 0U;
|
|
}
|
|
|
|
hhcd->hc[ch_num].speed = speed;
|
|
hhcd->hc[ch_num].max_packet = (uint16_t)HCcharMps;
|
|
|
|
status = USB_HC_Init(hhcd->Instance, ch_num, epnum,
|
|
dev_address, speed, ep_type, (uint16_t)HCcharMps);
|
|
|
|
__HAL_UNLOCK(hhcd);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Halt a host channel.
|
|
* @param hhcd HCD handle
|
|
* @param ch_num Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
__HAL_LOCK(hhcd);
|
|
(void)USB_HC_Halt(hhcd->Instance, ch_num);
|
|
__HAL_UNLOCK(hhcd);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the host driver.
|
|
* @param hhcd HCD handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Check the HCD handle allocation */
|
|
if (hhcd == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
hhcd->State = HAL_HCD_STATE_BUSY;
|
|
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
if (hhcd->MspDeInitCallback == NULL)
|
|
{
|
|
hhcd->MspDeInitCallback = HAL_HCD_MspDeInit; /* Legacy weak MspDeInit */
|
|
}
|
|
|
|
/* DeInit the low level hardware */
|
|
hhcd->MspDeInitCallback(hhcd);
|
|
#else
|
|
/* DeInit the low level hardware: CLOCK, NVIC.*/
|
|
HAL_HCD_MspDeInit(hhcd);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
|
|
__HAL_HCD_DISABLE(hhcd);
|
|
|
|
hhcd->State = HAL_HCD_STATE_RESET;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize the HCD MSP.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_MspInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the HCD MSP.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_MspDeInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions
|
|
* @brief HCD IO operation functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
[..] This subsection provides a set of functions allowing to manage the USB Host Data
|
|
Transfer
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Submit a new URB for processing.
|
|
* @param hhcd HCD handle
|
|
* @param ch_num Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @param direction Channel number.
|
|
* This parameter can be one of these values:
|
|
* 0 : Output / 1 : Input
|
|
* @param ep_type Endpoint Type.
|
|
* This parameter can be one of these values:
|
|
* EP_TYPE_CTRL: Control type/
|
|
* EP_TYPE_ISOC: Isochronous type/
|
|
* EP_TYPE_BULK: Bulk type/
|
|
* EP_TYPE_INTR: Interrupt type/
|
|
* @param token Endpoint Type.
|
|
* This parameter can be one of these values:
|
|
* 0: HC_PID_SETUP / 1: HC_PID_DATA1
|
|
* @param pbuff pointer to URB data
|
|
* @param length Length of URB data
|
|
* @param do_ping activate do ping protocol (for high speed only).
|
|
* This parameter can be one of these values:
|
|
* 0 : do ping inactive / 1 : do ping active
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
|
|
uint8_t ch_num,
|
|
uint8_t direction,
|
|
uint8_t ep_type,
|
|
uint8_t token,
|
|
uint8_t *pbuff,
|
|
uint16_t length,
|
|
uint8_t do_ping)
|
|
{
|
|
hhcd->hc[ch_num].ep_is_in = direction;
|
|
hhcd->hc[ch_num].ep_type = ep_type;
|
|
|
|
if (token == 0U)
|
|
{
|
|
hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
|
|
hhcd->hc[ch_num].do_ping = do_ping;
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
|
|
}
|
|
|
|
/* Manage Data Toggle */
|
|
switch (ep_type)
|
|
{
|
|
case EP_TYPE_CTRL:
|
|
if (token == 1U) /* send data */
|
|
{
|
|
if (direction == 0U)
|
|
{
|
|
if (length == 0U)
|
|
{
|
|
/* For Status OUT stage, Length == 0U, Status Out PID = 1 */
|
|
hhcd->hc[ch_num].toggle_out = 1U;
|
|
}
|
|
|
|
/* Set the Data Toggle bit as per the Flag */
|
|
if (hhcd->hc[ch_num].toggle_out == 0U)
|
|
{
|
|
/* Put the PID 0 */
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
|
|
}
|
|
else
|
|
{
|
|
/* Put the PID 1 */
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case EP_TYPE_BULK:
|
|
if (direction == 0U)
|
|
{
|
|
/* Set the Data Toggle bit as per the Flag */
|
|
if (hhcd->hc[ch_num].toggle_out == 0U)
|
|
{
|
|
/* Put the PID 0 */
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
|
|
}
|
|
else
|
|
{
|
|
/* Put the PID 1 */
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (hhcd->hc[ch_num].toggle_in == 0U)
|
|
{
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
|
|
}
|
|
}
|
|
|
|
break;
|
|
case EP_TYPE_INTR:
|
|
if (direction == 0U)
|
|
{
|
|
/* Set the Data Toggle bit as per the Flag */
|
|
if (hhcd->hc[ch_num].toggle_out == 0U)
|
|
{
|
|
/* Put the PID 0 */
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
|
|
}
|
|
else
|
|
{
|
|
/* Put the PID 1 */
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (hhcd->hc[ch_num].toggle_in == 0U)
|
|
{
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case EP_TYPE_ISOC:
|
|
hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
hhcd->hc[ch_num].xfer_buff = pbuff;
|
|
hhcd->hc[ch_num].xfer_len = length;
|
|
hhcd->hc[ch_num].urb_state = URB_IDLE;
|
|
hhcd->hc[ch_num].xfer_count = 0U;
|
|
hhcd->hc[ch_num].ch_num = ch_num;
|
|
hhcd->hc[ch_num].state = HC_IDLE;
|
|
|
|
return USB_HC_StartXfer(hhcd->Instance, &hhcd->hc[ch_num]);
|
|
}
|
|
|
|
/**
|
|
* @brief Handle HCD interrupt request.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
|
|
uint32_t USBx_BASE = (uint32_t)USBx;
|
|
uint32_t i;
|
|
uint32_t interrupt;
|
|
|
|
/* Ensure that we are in device mode */
|
|
if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
|
|
{
|
|
/* Avoid spurious interrupt */
|
|
if (__HAL_HCD_IS_INVALID_INTERRUPT(hhcd))
|
|
{
|
|
return;
|
|
}
|
|
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
|
|
{
|
|
/* Incorrect mode, acknowledge the interrupt */
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
|
|
}
|
|
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
|
|
{
|
|
/* Incorrect mode, acknowledge the interrupt */
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
|
|
}
|
|
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
|
|
{
|
|
/* Incorrect mode, acknowledge the interrupt */
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
|
|
}
|
|
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
|
|
{
|
|
/* Incorrect mode, acknowledge the interrupt */
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
|
|
}
|
|
|
|
/* Handle Host Disconnect Interrupts */
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
|
|
{
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
|
|
|
|
if ((USBx_HPRT0 & USB_OTG_HPRT_PCSTS) == 0U)
|
|
{
|
|
/* Flush USB Fifo */
|
|
(void)USB_FlushTxFifo(USBx, 0x10U);
|
|
(void)USB_FlushRxFifo(USBx);
|
|
|
|
if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
|
|
{
|
|
/* Restore FS Clock */
|
|
(void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ);
|
|
}
|
|
|
|
/* Handle Host Port Disconnect Interrupt */
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->DisconnectCallback(hhcd);
|
|
#else
|
|
HAL_HCD_Disconnect_Callback(hhcd);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Handle Host Port Interrupts */
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
|
|
{
|
|
HCD_Port_IRQHandler(hhcd);
|
|
}
|
|
|
|
/* Handle Host SOF Interrupt */
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
|
|
{
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->SOFCallback(hhcd);
|
|
#else
|
|
HAL_HCD_SOF_Callback(hhcd);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
|
|
}
|
|
|
|
/* Handle Host channel Interrupt */
|
|
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
|
|
{
|
|
interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
|
|
for (i = 0U; i < hhcd->Init.Host_channels; i++)
|
|
{
|
|
if ((interrupt & (1UL << (i & 0xFU))) != 0U)
|
|
{
|
|
if ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_EPDIR) == USB_OTG_HCCHAR_EPDIR)
|
|
{
|
|
HCD_HC_IN_IRQHandler(hhcd, (uint8_t)i);
|
|
}
|
|
else
|
|
{
|
|
HCD_HC_OUT_IRQHandler(hhcd, (uint8_t)i);
|
|
}
|
|
}
|
|
}
|
|
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
|
|
}
|
|
|
|
/* Handle Rx Queue Level Interrupts */
|
|
if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
|
|
{
|
|
USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
|
|
|
|
HCD_RXQLVL_IRQHandler(hhcd);
|
|
|
|
USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief SOF callback.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_SOF_Callback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Connection Event callback.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_Connect_Callback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Disconnection Event callback.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_Disconnect_Callback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Port Enabled Event callback.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_Disconnect_Callback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Port Disabled Event callback.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_Disconnect_Callback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Notify URB state change callback.
|
|
* @param hhcd HCD handle
|
|
* @param chnum Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @param urb_state:
|
|
* This parameter can be one of these values:
|
|
* URB_IDLE/
|
|
* URB_DONE/
|
|
* URB_NOTREADY/
|
|
* URB_NYET/
|
|
* URB_ERROR/
|
|
* URB_STALL/
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hhcd);
|
|
UNUSED(chnum);
|
|
UNUSED(urb_state);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
/**
|
|
* @brief Register a User USB HCD Callback
|
|
* To be used instead of the weak predefined callback
|
|
* @param hhcd USB HCD handle
|
|
* @param CallbackID ID of the callback to be registered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID
|
|
* @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID
|
|
* @arg @ref HAL_HCD_DISCONNECT_CB_ID OTG HCD Disconnect callback ID
|
|
* @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enable callback ID
|
|
* @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disable callback ID
|
|
* @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID
|
|
* @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @param pCallback pointer to the Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd,
|
|
HAL_HCD_CallbackIDTypeDef CallbackID,
|
|
pHCD_CallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hhcd);
|
|
|
|
if (hhcd->State == HAL_HCD_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_HCD_SOF_CB_ID :
|
|
hhcd->SOFCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_CONNECT_CB_ID :
|
|
hhcd->ConnectCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_DISCONNECT_CB_ID :
|
|
hhcd->DisconnectCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_PORT_ENABLED_CB_ID :
|
|
hhcd->PortEnabledCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_PORT_DISABLED_CB_ID :
|
|
hhcd->PortDisabledCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_MSPINIT_CB_ID :
|
|
hhcd->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_MSPDEINIT_CB_ID :
|
|
hhcd->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (hhcd->State == HAL_HCD_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_HCD_MSPINIT_CB_ID :
|
|
hhcd->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_HCD_MSPDEINIT_CB_ID :
|
|
hhcd->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hhcd);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unregister an USB HCD Callback
|
|
* USB HCD callback is redirected to the weak predefined callback
|
|
* @param hhcd USB HCD handle
|
|
* @param CallbackID ID of the callback to be unregistered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_HCD_SOF_CB_ID USB HCD SOF callback ID
|
|
* @arg @ref HAL_HCD_CONNECT_CB_ID USB HCD Connect callback ID
|
|
* @arg @ref HAL_HCD_DISCONNECT_CB_ID OTG HCD Disconnect callback ID
|
|
* @arg @ref HAL_HCD_PORT_ENABLED_CB_ID USB HCD Port Enabled callback ID
|
|
* @arg @ref HAL_HCD_PORT_DISABLED_CB_ID USB HCD Port Disabled callback ID
|
|
* @arg @ref HAL_HCD_MSPINIT_CB_ID MspDeInit callback ID
|
|
* @arg @ref HAL_HCD_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hhcd);
|
|
|
|
/* Setup Legacy weak Callbacks */
|
|
if (hhcd->State == HAL_HCD_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_HCD_SOF_CB_ID :
|
|
hhcd->SOFCallback = HAL_HCD_SOF_Callback;
|
|
break;
|
|
|
|
case HAL_HCD_CONNECT_CB_ID :
|
|
hhcd->ConnectCallback = HAL_HCD_Connect_Callback;
|
|
break;
|
|
|
|
case HAL_HCD_DISCONNECT_CB_ID :
|
|
hhcd->DisconnectCallback = HAL_HCD_Disconnect_Callback;
|
|
break;
|
|
|
|
case HAL_HCD_PORT_ENABLED_CB_ID :
|
|
hhcd->PortEnabledCallback = HAL_HCD_PortEnabled_Callback;
|
|
break;
|
|
|
|
case HAL_HCD_PORT_DISABLED_CB_ID :
|
|
hhcd->PortDisabledCallback = HAL_HCD_PortDisabled_Callback;
|
|
break;
|
|
|
|
case HAL_HCD_MSPINIT_CB_ID :
|
|
hhcd->MspInitCallback = HAL_HCD_MspInit;
|
|
break;
|
|
|
|
case HAL_HCD_MSPDEINIT_CB_ID :
|
|
hhcd->MspDeInitCallback = HAL_HCD_MspDeInit;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (hhcd->State == HAL_HCD_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_HCD_MSPINIT_CB_ID :
|
|
hhcd->MspInitCallback = HAL_HCD_MspInit;
|
|
break;
|
|
|
|
case HAL_HCD_MSPDEINIT_CB_ID :
|
|
hhcd->MspDeInitCallback = HAL_HCD_MspDeInit;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hhcd);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Register USB HCD Host Channel Notify URB Change Callback
|
|
* To be used instead of the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback
|
|
* @param hhcd HCD handle
|
|
* @param pCallback pointer to the USB HCD Host Channel Notify URB Change Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd,
|
|
pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hhcd);
|
|
|
|
if (hhcd->State == HAL_HCD_STATE_READY)
|
|
{
|
|
hhcd->HC_NotifyURBChangeCallback = pCallback;
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hhcd);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unregister the USB HCD Host Channel Notify URB Change Callback
|
|
* USB HCD Host Channel Notify URB Change Callback is redirected
|
|
* to the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback
|
|
* @param hhcd HCD handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hhcd);
|
|
|
|
if (hhcd->State == HAL_HCD_STATE_READY)
|
|
{
|
|
hhcd->HC_NotifyURBChangeCallback = HAL_HCD_HC_NotifyURBChange_Callback; /* Legacy weak DataOutStageCallback */
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hhcd->ErrorCode |= HAL_HCD_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hhcd);
|
|
|
|
return status;
|
|
}
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions
|
|
* @brief Management functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral Control functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to control the HCD data
|
|
transfers.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Start the host driver.
|
|
* @param hhcd HCD handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
__HAL_LOCK(hhcd);
|
|
/* Enable port power */
|
|
(void)USB_DriveVbus(hhcd->Instance, 1U);
|
|
|
|
/* Enable global interrupt */
|
|
__HAL_HCD_ENABLE(hhcd);
|
|
__HAL_UNLOCK(hhcd);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stop the host driver.
|
|
* @param hhcd HCD handle
|
|
* @retval HAL status
|
|
*/
|
|
|
|
HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
__HAL_LOCK(hhcd);
|
|
(void)USB_StopHost(hhcd->Instance);
|
|
__HAL_UNLOCK(hhcd);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Reset the host port.
|
|
* @param hhcd HCD handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
return (USB_ResetPort(hhcd->Instance));
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions
|
|
* @brief Peripheral State functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral State functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection permits to get in run-time the status of the peripheral
|
|
and the data flow.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Return the HCD handle state.
|
|
* @param hhcd HCD handle
|
|
* @retval HAL state
|
|
*/
|
|
HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef const *hhcd)
|
|
{
|
|
return hhcd->State;
|
|
}
|
|
|
|
/**
|
|
* @brief Return URB state for a channel.
|
|
* @param hhcd HCD handle
|
|
* @param chnum Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval URB state.
|
|
* This parameter can be one of these values:
|
|
* URB_IDLE/
|
|
* URB_DONE/
|
|
* URB_NOTREADY/
|
|
* URB_NYET/
|
|
* URB_ERROR/
|
|
* URB_STALL
|
|
*/
|
|
HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef const *hhcd, uint8_t chnum)
|
|
{
|
|
return hhcd->hc[chnum].urb_state;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Return the last host transfer size.
|
|
* @param hhcd HCD handle
|
|
* @param chnum Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval last transfer size in byte
|
|
*/
|
|
uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef const *hhcd, uint8_t chnum)
|
|
{
|
|
return hhcd->hc[chnum].xfer_count;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the Host Channel state.
|
|
* @param hhcd HCD handle
|
|
* @param chnum Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval Host channel state
|
|
* This parameter can be one of these values:
|
|
* HC_IDLE/
|
|
* HC_XFRC/
|
|
* HC_HALTED/
|
|
* HC_NYET/
|
|
* HC_NAK/
|
|
* HC_STALL/
|
|
* HC_XACTERR/
|
|
* HC_BBLERR/
|
|
* HC_DATATGLERR
|
|
*/
|
|
HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef const *hhcd, uint8_t chnum)
|
|
{
|
|
return hhcd->hc[chnum].state;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the current Host frame number.
|
|
* @param hhcd HCD handle
|
|
* @retval Current Host frame number
|
|
*/
|
|
uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
return (USB_GetCurrentFrame(hhcd->Instance));
|
|
}
|
|
|
|
/**
|
|
* @brief Return the Host enumeration speed.
|
|
* @param hhcd HCD handle
|
|
* @retval Enumeration speed
|
|
*/
|
|
uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
return (USB_GetHostSpeed(hhcd->Instance));
|
|
}
|
|
|
|
/**
|
|
* @brief Set host channel Hub information.
|
|
* @param hhcd HCD handle
|
|
* @param ch_num Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @param addr Hub address
|
|
* @param PortNbr Hub port number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_HC_SetHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
|
|
uint8_t addr, uint8_t PortNbr)
|
|
{
|
|
hhcd->hc[ch_num].hub_addr = addr;
|
|
hhcd->hc[ch_num].hub_port_nbr = PortNbr;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Clear host channel hub information.
|
|
* @param hhcd HCD handle
|
|
* @param ch_num Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_HCD_HC_ClearHubInfo(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
|
|
{
|
|
hhcd->hc[ch_num].hub_addr = 0U;
|
|
hhcd->hc[ch_num].hub_port_nbr = 0U;
|
|
|
|
return HAL_OK;
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup HCD_Private_Functions
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Handle Host Channel IN interrupt requests.
|
|
* @param hhcd HCD handle
|
|
* @param chnum Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval none
|
|
*/
|
|
static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum)
|
|
{
|
|
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
|
|
uint32_t USBx_BASE = (uint32_t)USBx;
|
|
uint32_t tmpreg;
|
|
|
|
if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_AHBERR))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
|
|
hhcd->hc[chnum].state = HC_XACTERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_BBERR))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_BBERR);
|
|
hhcd->hc[chnum].state = HC_BBLERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_STALL))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
|
|
hhcd->hc[chnum].state = HC_STALL;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_DTERR))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
|
|
hhcd->hc[chnum].state = HC_DATATGLERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_TXERR))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
|
|
hhcd->hc[chnum].state = HC_XACTERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else
|
|
{
|
|
/* ... */
|
|
}
|
|
|
|
if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_FRMOR))
|
|
{
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_XFRC))
|
|
{
|
|
hhcd->hc[chnum].state = HC_XFRC;
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
|
|
|
|
if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
|
|
(hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
|
|
{
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
|
|
}
|
|
else if ((hhcd->hc[chnum].ep_type == EP_TYPE_INTR) ||
|
|
(hhcd->hc[chnum].ep_type == EP_TYPE_ISOC))
|
|
{
|
|
USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
|
|
hhcd->hc[chnum].urb_state = URB_DONE;
|
|
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state);
|
|
#else
|
|
HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
/* ... */
|
|
}
|
|
|
|
if (hhcd->Init.dma_enable == 1U)
|
|
{
|
|
if ((((hhcd->hc[chnum].xfer_count + hhcd->hc[chnum].max_packet - 1U) / hhcd->hc[chnum].max_packet) & 1U) != 0U)
|
|
{
|
|
hhcd->hc[chnum].toggle_in ^= 1U;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[chnum].toggle_in ^= 1U;
|
|
}
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_ACK))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_CHH))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
|
|
|
|
if (hhcd->hc[chnum].state == HC_XFRC)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].urb_state = URB_DONE;
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_STALL)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].urb_state = URB_STALL;
|
|
}
|
|
else if ((hhcd->hc[chnum].state == HC_XACTERR) ||
|
|
(hhcd->hc[chnum].state == HC_DATATGLERR))
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].ErrCnt++;
|
|
if (hhcd->hc[chnum].ErrCnt > 2U)
|
|
{
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
hhcd->hc[chnum].urb_state = URB_ERROR;
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[chnum].urb_state = URB_NOTREADY;
|
|
|
|
if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
|
|
(hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
|
|
{
|
|
/* re-activate the channel */
|
|
tmpreg = USBx_HC(chnum)->HCCHAR;
|
|
tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
|
|
tmpreg |= USB_OTG_HCCHAR_CHENA;
|
|
USBx_HC(chnum)->HCCHAR = tmpreg;
|
|
}
|
|
}
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_NYET)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_ACK)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_NAK)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].urb_state = URB_NOTREADY;
|
|
|
|
if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
|
|
(hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
|
|
{
|
|
/* re-activate the channel */
|
|
tmpreg = USBx_HC(chnum)->HCCHAR;
|
|
tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
|
|
tmpreg |= USB_OTG_HCCHAR_CHENA;
|
|
USBx_HC(chnum)->HCCHAR = tmpreg;
|
|
}
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_BBLERR)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].ErrCnt++;
|
|
hhcd->hc[chnum].urb_state = URB_ERROR;
|
|
}
|
|
else
|
|
{
|
|
if (hhcd->hc[chnum].state == HC_HALTED)
|
|
{
|
|
return;
|
|
}
|
|
}
|
|
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state);
|
|
#else
|
|
HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NYET))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
|
|
hhcd->hc[chnum].state = HC_NYET;
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NAK))
|
|
{
|
|
if (hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
|
|
{
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
hhcd->hc[chnum].state = HC_NAK;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL) ||
|
|
(hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
|
|
{
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
hhcd->hc[chnum].state = HC_NAK;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else
|
|
{
|
|
/* ... */
|
|
}
|
|
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
|
|
}
|
|
else
|
|
{
|
|
/* ... */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Handle Host Channel OUT interrupt requests.
|
|
* @param hhcd HCD handle
|
|
* @param chnum Channel number.
|
|
* This parameter can be a value from 1 to 15
|
|
* @retval none
|
|
*/
|
|
static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum)
|
|
{
|
|
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
|
|
uint32_t USBx_BASE = (uint32_t)USBx;
|
|
uint32_t tmpreg;
|
|
uint32_t num_packets;
|
|
|
|
if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_AHBERR))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
|
|
hhcd->hc[chnum].state = HC_XACTERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_ACK))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_FRMOR))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_XFRC))
|
|
{
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
|
|
hhcd->hc[chnum].state = HC_XFRC;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_STALL))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
|
|
hhcd->hc[chnum].state = HC_STALL;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_NAK))
|
|
{
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
hhcd->hc[chnum].state = HC_NAK;
|
|
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_TXERR))
|
|
{
|
|
hhcd->hc[chnum].state = HC_XACTERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_DTERR))
|
|
{
|
|
hhcd->hc[chnum].state = HC_DATATGLERR;
|
|
(void)USB_HC_Halt(hhcd->Instance, chnum);
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
|
|
}
|
|
else if (__HAL_HCD_GET_CH_FLAG(hhcd, chnum, USB_OTG_HCINT_CHH))
|
|
{
|
|
__HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
|
|
|
|
if (hhcd->hc[chnum].state == HC_XFRC)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].urb_state = URB_DONE;
|
|
|
|
if ((hhcd->hc[chnum].ep_type == EP_TYPE_BULK) ||
|
|
(hhcd->hc[chnum].ep_type == EP_TYPE_INTR))
|
|
{
|
|
if (hhcd->Init.dma_enable == 0U)
|
|
{
|
|
hhcd->hc[chnum].toggle_out ^= 1U;
|
|
}
|
|
|
|
if ((hhcd->Init.dma_enable == 1U) && (hhcd->hc[chnum].xfer_len > 0U))
|
|
{
|
|
num_packets = (hhcd->hc[chnum].xfer_len + hhcd->hc[chnum].max_packet - 1U) / hhcd->hc[chnum].max_packet;
|
|
|
|
if ((num_packets & 1U) != 0U)
|
|
{
|
|
hhcd->hc[chnum].toggle_out ^= 1U;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_ACK)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_NAK)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].urb_state = URB_NOTREADY;
|
|
}
|
|
else if (hhcd->hc[chnum].state == HC_STALL)
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].urb_state = URB_STALL;
|
|
}
|
|
else if ((hhcd->hc[chnum].state == HC_XACTERR) ||
|
|
(hhcd->hc[chnum].state == HC_DATATGLERR))
|
|
{
|
|
hhcd->hc[chnum].state = HC_HALTED;
|
|
hhcd->hc[chnum].ErrCnt++;
|
|
if (hhcd->hc[chnum].ErrCnt > 2U)
|
|
{
|
|
hhcd->hc[chnum].ErrCnt = 0U;
|
|
hhcd->hc[chnum].urb_state = URB_ERROR;
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[chnum].urb_state = URB_NOTREADY;
|
|
|
|
/* re-activate the channel */
|
|
tmpreg = USBx_HC(chnum)->HCCHAR;
|
|
tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
|
|
tmpreg |= USB_OTG_HCCHAR_CHENA;
|
|
USBx_HC(chnum)->HCCHAR = tmpreg;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->HC_NotifyURBChangeCallback(hhcd, chnum, hhcd->hc[chnum].urb_state);
|
|
#else
|
|
HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
return;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Handle Rx Queue Level interrupt requests.
|
|
* @param hhcd HCD handle
|
|
* @retval none
|
|
*/
|
|
static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
|
|
uint32_t USBx_BASE = (uint32_t)USBx;
|
|
uint32_t pktsts;
|
|
uint32_t pktcnt;
|
|
uint32_t GrxstspReg;
|
|
uint32_t xferSizePktCnt;
|
|
uint32_t tmpreg;
|
|
uint32_t chnum;
|
|
|
|
GrxstspReg = hhcd->Instance->GRXSTSP;
|
|
chnum = GrxstspReg & USB_OTG_GRXSTSP_EPNUM;
|
|
pktsts = (GrxstspReg & USB_OTG_GRXSTSP_PKTSTS) >> 17;
|
|
pktcnt = (GrxstspReg & USB_OTG_GRXSTSP_BCNT) >> 4;
|
|
|
|
switch (pktsts)
|
|
{
|
|
case GRXSTS_PKTSTS_IN:
|
|
/* Read the data into the host buffer. */
|
|
if ((pktcnt > 0U) && (hhcd->hc[chnum].xfer_buff != (void *)0))
|
|
{
|
|
if ((hhcd->hc[chnum].xfer_count + pktcnt) <= hhcd->hc[chnum].xfer_len)
|
|
{
|
|
(void)USB_ReadPacket(hhcd->Instance,
|
|
hhcd->hc[chnum].xfer_buff, (uint16_t)pktcnt);
|
|
|
|
/* manage multiple Xfer */
|
|
hhcd->hc[chnum].xfer_buff += pktcnt;
|
|
hhcd->hc[chnum].xfer_count += pktcnt;
|
|
|
|
/* get transfer size packet count */
|
|
xferSizePktCnt = (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19;
|
|
|
|
if ((hhcd->hc[chnum].max_packet == pktcnt) && (xferSizePktCnt > 0U))
|
|
{
|
|
/* re-activate the channel when more packets are expected */
|
|
tmpreg = USBx_HC(chnum)->HCCHAR;
|
|
tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
|
|
tmpreg |= USB_OTG_HCCHAR_CHENA;
|
|
USBx_HC(chnum)->HCCHAR = tmpreg;
|
|
hhcd->hc[chnum].toggle_in ^= 1U;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
hhcd->hc[chnum].urb_state = URB_ERROR;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
|
|
break;
|
|
|
|
case GRXSTS_PKTSTS_IN_XFER_COMP:
|
|
case GRXSTS_PKTSTS_CH_HALTED:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Handle Host Port interrupt requests.
|
|
* @param hhcd HCD handle
|
|
* @retval None
|
|
*/
|
|
static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd)
|
|
{
|
|
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
|
|
uint32_t USBx_BASE = (uint32_t)USBx;
|
|
__IO uint32_t hprt0;
|
|
__IO uint32_t hprt0_dup;
|
|
|
|
/* Handle Host Port Interrupts */
|
|
hprt0 = USBx_HPRT0;
|
|
hprt0_dup = USBx_HPRT0;
|
|
|
|
hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | \
|
|
USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG);
|
|
|
|
/* Check whether Port Connect detected */
|
|
if ((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
|
|
{
|
|
if ((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
|
|
{
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->ConnectCallback(hhcd);
|
|
#else
|
|
HAL_HCD_Connect_Callback(hhcd);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
}
|
|
hprt0_dup |= USB_OTG_HPRT_PCDET;
|
|
}
|
|
|
|
/* Check whether Port Enable Changed */
|
|
if ((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
|
|
{
|
|
hprt0_dup |= USB_OTG_HPRT_PENCHNG;
|
|
|
|
if ((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
|
|
{
|
|
if (hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
|
|
{
|
|
if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17))
|
|
{
|
|
(void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_6_MHZ);
|
|
}
|
|
else
|
|
{
|
|
(void)USB_InitFSLSPClkSel(hhcd->Instance, HCFG_48_MHZ);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (hhcd->Init.speed == HCD_SPEED_FULL)
|
|
{
|
|
USBx_HOST->HFIR = HFIR_60_MHZ;
|
|
}
|
|
}
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->PortEnabledCallback(hhcd);
|
|
#else
|
|
HAL_HCD_PortEnabled_Callback(hhcd);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
|
|
}
|
|
else
|
|
{
|
|
#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
|
|
hhcd->PortDisabledCallback(hhcd);
|
|
#else
|
|
HAL_HCD_PortDisabled_Callback(hhcd);
|
|
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Check for an overcurrent */
|
|
if ((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
|
|
{
|
|
hprt0_dup |= USB_OTG_HPRT_POCCHNG;
|
|
}
|
|
|
|
/* Clear Port Interrupts */
|
|
USBx_HPRT0 = hprt0_dup;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* defined (USB_OTG_FS) */
|
|
#endif /* HAL_HCD_MODULE_ENABLED */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|