chargeController/APP/businessLogic/Src/task.c

#include "task.h"
#include "inFlash.h"
#include "parameter.h"
#include "FM_GPIO.h"
#include "chargControlTypes.h"
#include "bl_chargControl.h"
//#include "hy_protocol.h"
//#include "cfg_protocol.h"
#include "uart_dev.h"
#include "abnormalManage.h"
#include "interruptSend.h"
#include "configParameter.h"
#include "capture.h"
#include "bl_usart.h"
#include "SOE.h"


#include <stdio.h>




/* 控制运行指示灯和喂狗  */
#define runled_reloadVal 2000               /* 任务执行间隔  */
// static uint16_t runled_reloadVal = 1000;         /* 任务执行间隔  */
#define runled_offset 0                         /* 任务执行偏移量  */
static STR_TimeSliceOffset m_runled;
static void Task_Runled(void);

/* 喂狗  */
#define wdi_reloadVal 1000                  /* 任务执行间隔  */
#define wdi_offset 0                        /* 任务执行偏移量  */
static STR_TimeSliceOffset m_wdi;
static void Task_wdi(void);

/* 刷新寄存器中的数据  */
#define refreshJudgeData_reloadVal 1000     /* 任务执行间隔  */
#define refreshJudgeData_offset 0           /* 任务执行偏移量  */
static STR_TimeSliceOffset m_refreshJudgeData;
static void Task_refreshJudgeData(void);

/* 启动任务 */
#define startControl_reloadVal 1000         /* 任务执行间隔  */
#define startControl_offset 100             /* 任务执行偏移量  */
static STR_TimeSliceOffset m_startControl;
static void Task_startControl(void);

/* 软启动  */
#define softStart_reloadVal 1               /* 任务执行间隔  */
#define softStart_offset 0                  /* 任务执行偏移量  */
static STR_TimeSliceOffset m_softStart;
static void Task_softStart(void);

/* 回路阻抗检测  */
#define impedanceCalculation_reloadVal 20               /* 任务执行间隔  */
#define impedanceCalculation_offset 0                   /* 任务执行偏移量 */
static STR_TimeSliceOffset m_impedanceCalculation;
static void Task_impedanceCalculation(void);

/* 开路电压采集 */
#define collectOpenCircuitVoltage_reloadVal 1000         /* 任务执行间隔  */
#define collectOpenCircuitVoltage_offset 0               /* 任务执行偏移量  */
STR_TimeSliceOffset m_collectOpenCircuitVoltage;
void Task_collectOpenCircuitVoltage(void);

// /* 限时开启HY协议配置模式 */
// #define beginHYconfigMode_reloadVal 1000         /* 任务执行间隔  */
// #define beginHYconfigMode_offset 0               /* 任务执行偏移量  */
// static STR_TimeSliceOffset m_beginHYconfigMode;
// static void Task_beginHYconfigMode(void);

// /* 串口数据接收判断 */
// #define usartJudge_reloadVal 100             /* 任务执行间隔  */
// #define usartJudge_offset 0                  /* 任务执行偏移量  */
// static STR_TimeSliceOffset m_usartJudge;
// static void Task_usartJudge(void);

// /* 串口数据解析和处理 */
// #define usartHandle_reloadVal 20                /* 任务执行间隔  */
// #define usartHandle_offset 0                    /* 任务执行偏移量  */
// static STR_TimeSliceOffset m_usartHandle;
// static void Task_usartHandle(void);
// typedef void (*uartJudgeHandle)(device_handle device);
// static uartJudgeHandle uart_judge_handle;

// /* 配置文件数据解析和处理 */
// #define usartCfg_reloadVal 200              /* 任务执行间隔  */
// #define usartCfg_offset 0                   /* 任务执行偏移量  */
// static STR_TimeSliceOffset m_usartCfg;
// static void Task_usartCfg(void);

/* 短路保护  */
#define shortCircuitProtection_reloadVal 1000              /* 任务执行间隔  */
#define shortCircuitProtection_offset 0                    /* 任务执行偏移量  */
static STR_TimeSliceOffset m_shortCircuitProtection;
static void Task_shortCircuitProtection(void);

/* 过载保护  */
#define excessiveLoad_reloadVal 1000             /* 任务执行间隔  */
#define excessiveLoad_offset 0                   /* 任务执行偏移量  */
STR_TimeSliceOffset m_excessiveLoad;
void Task_excessiveLoad(void);

/* 总线状态检测  */
#define busFree_reloadVal 5                 /* 任务执行间隔  */
#define busFree_offset 0                    /* 任务执行偏移量  */
STR_TimeSliceOffset m_busFree;
void Task_busFree(void);

// /* 中断发送  */
// #define interruptSend_reloadVal 1                 /* 任务执行间隔  */
// #define interruptSend_offset 0                    /* 任务执行偏移量  */
// STR_TimeSliceOffset m_interruptSend;
// void Task_interruptSend(void);

// /* 软件过载保护  */
// #define softExcessiveLoad_reloadVal 1000            /* 任务执行间隔  */
// #define softExcessiveLoad_offset 0                  /* 任务执行偏移量  */
// STR_TimeSliceOffset m_softExcessiveLoad;
// void Task_softExcessiveLoad(void);

/* 软件短路保护  */
#define softShortCircuit_reloadVal 1000            /* 任务执行间隔  */
#define softShortCircuit_offset 0                  /* 任务执行偏移量  */
STR_TimeSliceOffset m_softShortCircuit;
void Task_softShortCircuit(void);


/* 串口任务 */
#define uart_reloadVal 10                   /* 任务执行间隔  */
#define uart_offset 0                       /* 任务执行偏移量  */
STR_TimeSliceOffset m_uart;
void Task_uart(void);

/* 将记录下来的时间存入flash中 */
#define SOE_reloadVal 3000                  /* 任务执行间隔  */
#define SOE_offset 100                      /* 任务执行偏移量  */
STR_TimeSliceOffset m_SOE;
void Task_SOE(void);



/**
 * @brief   启动时初始化各任务
 * @param   None
 * @retval  None
 *
 */
void task_Init(void)
{
    TimeSliceOffset_Register(&m_runled, Task_Runled, runled_reloadVal, runled_offset);
    TimeSliceOffset_Register(&m_wdi, Task_wdi, wdi_reloadVal, wdi_offset);
    TimeSliceOffset_Register(&m_startControl, Task_startControl, startControl_reloadVal, startControl_offset);
    TimeSliceOffset_Register(&m_refreshJudgeData, Task_refreshJudgeData
                                , refreshJudgeData_reloadVal, refreshJudgeData_offset);
    TimeSliceOffset_Register(&m_collectOpenCircuitVoltage, Task_collectOpenCircuitVoltage
                                , collectOpenCircuitVoltage_reloadVal, collectOpenCircuitVoltage_offset);

    TimeSliceOffset_Register(&m_uart, Task_uart, uart_reloadVal, uart_offset); 
    TimeSliceOffset_Register(&m_busFree, Task_busFree, busFree_reloadVal, busFree_offset);

    TimeSliceOffset_Register(&m_SOE, Task_SOE, SOE_reloadVal, SOE_offset);    
}

/**
 * @brief   运行指示灯任务
 * @param   None
 * @retval  None
 *
 */
void Task_Runled(void)
{
    RUN_LED();
}

/**
 * @brief   修改运行指示灯状态
 * @param   mode 充电时1Hz的频率闪烁
 *               其余时间2Hz的频率闪烁
 * @retval  None
 *
 */
void chargRunLed(uint8_t mode)
{
    if (mode == runLedChargMode) {
        m_runled.reloadVal = 500;
    }
    else if (mode == runLedOtherMode) {
        m_runled.reloadVal = 2000;        
    }
}

/**
 * @brief   喂狗任务
 * @param   None
 * @retval  None
 */
void Task_wdi(void)
{    
    feedDog();

//    debug_printf("chargCurrent:%f \n", getChargCurrent());
//    debug_printf("outputVoltage:%f \n", getOutputVoltage());
//    debug_printf("BatteryVoltage:%f \n", getBatteryVoltage());
//    debug_printf("dischargCurrent:%f \n", getDischargCurrent());
//    debug_printf("solarInCircuitVoltage:%f \n", getSolarInCircuitVoltage());
//    debug_printf("HighSideMosTemperature:%f \n", getHighSideMosTemperature());
//    debug_printf("InputVoltage:%f \n", getInputVoltage());
//    debug_printf("DischargMosState:%d \n", getDischargMosState());
//    debug_printf("MPPT_Mode:%d \n", getMPPT_Mode());
//    debug_printf("loopImpedance:%f \n", getLoopImpedance());
//    debug_printf("DutyRatio:%f \n", getDutyRatio());
// //    debug_printf("OUT_VOLT_IN:%f \n", get_OUT_VOLT_IN());
//    debug_printf("HAL_GetTick:%d \n", HAL_GetTick());
//    debug_printf("getExChargeCurr:%f \n", getExChargeCurr());


    // char buf[100];
    // sprintf(buf, "chargCurrent:%f \n", getChargCurrent());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));

    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "outputVoltage:%f \n", getOutputVoltage());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));

    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "BatteryVoltage:%f \n", getBatteryVoltage());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));
    
    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "dischargCurrent:%f \n", getDischargCurrent());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));
    
    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "solarInCircuitVoltage:%f \n", getSolarInCircuitVoltage());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));
    
    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "HighSideMosTemperature:%f \n", getHighSideMosTemperature());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));
    
    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "InputVoltage:%f \n", getInputVoltage());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));
    
    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "DischargMosState:%d \n", getDischargMosState());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));
    
    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "MPPT_Mode:%d \n", getMPPT_Mode());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));

    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "loopImpedance:%f \n", g_cfgParameter.loopImpedance);
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));

    // memset(buf, 0, sizeof(buf));
    // sprintf(buf, "DutyRatio:%f \n", getDutyRatio());
    // uart_dev_write(g_gw485_uart2_handle, buf, strlen(buf));


//    uart_interruptSend(g_gw485_uart2_handle, "hello world\n", sizeof("hello world\n"));

    /* 每天复位一次，复位前将电量信息写入flash中 */
    static uint32_t temp = 60 * 60 * 24;
    if (!(--temp)) {
        temp = 0;
        float tempF;
        tempF = getTotalElectricityConsumption();
        savetotalElectricityConsumption(&tempF);
        tempF = getTotalChargCapacity();
        savetotalChargCapacity(&tempF);
        timeInfo time;
        time = getLastTime();
        saveTime(&time);
        NVIC_SystemReset();
    }
}

/**
 * @brief   刷新并判断数据
 * @param   None
 * @retval  None
 *
 */
void Task_refreshJudgeData(void)
{
    /* 获取数据 */
    setInputVoltage();
    setHighSideMosTemperature();
    setExChargeCurr();

    // static float tempOutV;
    // tempOutV = get_OUT_VOLT_IN();
    // debug_printf("get_OUT_VOLT_IN:%f \n", tempOutV);

    /* 判断有无电池 */
    if (getBatteryState() == FALSE && (getChargBatteryCurrent() > 1 || getChargBatteryCurrent() < -1)
            && getOutputVoltage() < 14.2f) {
        setBatteryState(TRUE);
    }

    /* 有电池，太阳能输出功率大，电池电压低于14V，同时回路阻抗未测试或需要重新测试 */
    if ((getCheckImpedanceState() == FALSE || getLoopImpedance() == 0.0f)
            && (getBatteryState() == TRUE) && (getChargCurrent() > g_cfgParameter.maxChargCurr)
            && (getOutputVoltage() > 9) && (getSolarInCircuitVoltage() > 14)
            && (getBatteryVoltage() < 14)) {
        TimeSliceOffset_Register(&m_impedanceCalculation, Task_impedanceCalculation
                , impedanceCalculation_reloadVal, impedanceCalculation_reloadVal);
    }

    /* 温度检测 */
    if ((getMosTemperState() != mosTemperFull) 
            && (getHighSideMosTemperature() < g_cfgParameter.fullPowerOutputTemperature)) {
        /* 状态处于停止运行则打开充电开关 */
        if (getMosTemperState() == mosTemperStop) {
            beginChargWork();
        }
        setMosTemperState(mosTemperFull);                
    }
    else if ((getMosTemperState() == mosTemperFull)
            && getHighSideMosTemperature() > g_cfgParameter.reducePowerOutputTemperature) {        
        setMosTemperState(mosTemperReduce);
        insertEventsOrderRecord(overTemperature);
    }
    else if ((getMosTemperState() == mosTemperReduce)
            && getHighSideMosTemperature() > g_cfgParameter.stopPowerOutputTemperature) {        
        setMosTemperState(mosTemperStop); 
        /* 停止充电 */
        stopChargWork();
        insertEventsOrderRecord(stopTemperature);
    }

    /* 反向充电电流检测 */
    if (getExChargeCurr() > g_cfgParameter.reverseChargProtectionCurr) {
        setPowerOutput(FALSE);
        insertEventsOrderRecord(InputProtection);
    }
}

/**
 * @brief   停止充电或系统启动时后开启该任务，每隔一段时间检测开路电压
 *          检测电池电压是否大于充电电压，大于则开启充电，否则关闭充电
 *          能否达到充电标准，达到后检测电压判断系统中是否有电池同时启
 *          动软启动任务
 * @param   None
 * @retval  None
 *
 */
void Task_startControl(void)
{
    /* 是否达到启动条件 */
    if (getSolarInCircuitVoltage() > g_cfgParameter.startSolarOpenCircuitV
        && getSolarInCircuitVoltage() < g_cfgParameter.maxOpenSolarOutputCircuitV) {
        TimeSliceOffset_Unregister(&m_startControl);
        m_startControl.runFlag = 0;

        
        /* 判断有无电池 */
        if (getOutputVoltage() > 11.0f) {
            setBatteryState(TRUE);
        } else {
            setBatteryState(FALSE);
        }

        /* 启动软起动任务 */
        TimeSliceOffset_Register(&m_softStart, Task_softStart, softStart_reloadVal, softStart_offset);
    }

    if (getSolarInCircuitVoltage() >= g_cfgParameter.maxOpenSolarOutputCircuitV) {        
        insertEventsOrderRecord(overInputVolt);
    }
    
}
/**
 * @brief   打开启动任务
 * @param
 * @retval
 */
void beginStartControlTask(void)
{    
    TimeSliceOffset_Register(&m_startControl, Task_startControl, startControl_reloadVal, startControl_offset);
    m_startControl.runFlag = 1;
}

/**
 * @brief   软启动
 * @param
 * @retval
 *
 */
void Task_softStart(void)
{    
    static uint16_t num = 0;
    static float dutyRatio = 0;
    num++;

    if (num < 5) {
        set_pwmDutyRatio(0.1f);
        EN_PWMOUT_Eable();
    }

    else if (num > 70 || dutyRatio > 0.75f) {
        TimeSliceOffset_Unregister(&m_softStart);
        m_softStart.runFlag = 0;

        dutyRatio = 0;
        num = 0;
        setDutyRatio(0.75f);

        if (getBatteryState() == TRUE) {
            setMPPT_Mode(MPPT);
        } else {
            setMPPT_Mode(floatCharg);
        }
        setChargControlFlag(TRUE);
    }    

    else {        
        setDutyRatio(getDutyRatio() + 0.01f);
    }
}
/**
 * @brief   启动软启动任务
 * @param
 * @retval
 */
void beginSoftStartTask(void)
{
    TimeSliceOffset_Register(&m_softStart, Task_softStart, softStart_reloadVal, softStart_offset); 
}

/**
 * @brief   满足一定条件后启动该任务，测量回路阻抗
 * @param
 * @retval
 */
void Task_impedanceCalculation(void)
{
    static uint8_t num = 0;
    static float currOne = 0;
    static float voltOne = 0;
    static float currTwo = 0;
    static float voltTwo = 0;

    num++;

    if (num == 1) {
        setChargControlFlag(FALSE);
        setDutyRatio(0.5);
//        set_pwmDutyRatio(getDutyRatio());
        return;
    }

    if (num == 11) {
        currOne = getChargCurrent() - getDischargCurrent();
        voltOne = getOutputVoltage();
        setDutyRatio(0.85);
//        set_pwmDutyRatio(getDutyRatio());
        return;
    }

    if (num == 21) {
        num = 0;

        TimeSliceOffset_Unregister(&m_impedanceCalculation);
        m_impedanceCalculation.runFlag = 0;

        currTwo = getChargCurrent() - getDischargCurrent();
        voltTwo = getOutputVoltage();
        float tempLoopImpedance = 0;
        tempLoopImpedance = (voltOne - voltTwo) / (currOne - currTwo);

        // if (tempLoopImpedance < 1.0f && tempLoopImpedance > 0.05f) {
        //     g_cfgParameter.loopImpedance = tempLoopImpedance;
        //     saveLoopImpedance(&g_cfgParameter.loopImpedance);
        //     setCheckImpedanceState();
        // }
        /* 判断回路阻抗是否合理 */
        if (setLoopImpedance(tempLoopImpedance) == TRUE) {
            saveLoopImpedance(&tempLoopImpedance);
            setCheckImpedanceState();
        }        

        setMPPT_Mode(MPPT);
        setChargControlFlag(TRUE);
        return;
    }
}

/**
 * @brief   开路电压采集
 * @retval
 */
void Task_collectOpenCircuitVoltage(void)
{
    /* 用于无充电控制时获取开路电压 */
    static uint32_t collectOpenCircuitVoltageNoNUM = 0;
    /* 用于有充电控制时获取开路电压 */
    static uint8_t collectOpenCircuitVoltageYesNUM = 0;
    /* 用于有充电控制时当标志位 */
    static BOOL collectOpenCircuitVoltageYesFlag = 0;


    /* 未进行充电时，3S采集一次开路电压 */
    if (FALSE == getChargControlFlag()) {
        if (2 <= collectOpenCircuitVoltageNoNUM++) {
            setSolarOpenCircuitVoltage();
            collectOpenCircuitVoltageNoNUM = 0;
        }
        collectOpenCircuitVoltageYesNUM = 0;
        if (collectOpenCircuitVoltageYesFlag == TRUE) {
            setSolarOpenCircuitVoltage();
            beginChargWork();
            collectOpenCircuitVoltageYesFlag = FALSE;
        }
        
    }
    
    collectOpenCircuitVoltageYesNUM++;

    /* 到达开路电压检测时间 */
    if (collectOpenCircuitVoltageYesNUM == g_cfgParameter.collectOpenCircuitVoltageTime) {
        /* 有电池才进行开路电压检测 */
        if (getBatteryState()) {
            collectOpenCircuitVoltageYesFlag = TRUE;
            stopChargWork();
            /* 设置延时为（1000-500）ms */
            m_collectOpenCircuitVoltage.count = 500;
        }
        collectOpenCircuitVoltageYesNUM = 0;
    }

    /* 检测开路电压 */
    if (collectOpenCircuitVoltageYesNUM == g_cfgParameter.collectOpenCircuitVoltageTime + 1) {
        /* 有电池才进行开路电压检测 */
        if (getBatteryState()) {
            setSolarOpenCircuitVoltage();
            beginChargWork();
            collectOpenCircuitVoltageYesFlag = FALSE;
        }
    }
}

// /**
//  * @brief   开启HY配置模式后，配置完成后120S后自动退出
//  * @param
//  * @retval
//  */
// void Task_beginHYconfigMode(void)
// {
//     static uint8_t num = 0;
//     num++;
//     if (num >= 120) {
//         TimeSliceOffset_Unregister(&m_beginHYconfigMode);
//         m_beginHYconfigMode.runFlag = 0;
//         num = 0;
//         setHYconfigModeState(FALSE);
//     }
// }

// /**
//  * @brief   开启HY配置模式后启动退出任务 
//  * @param
//  * @retval
//  */
// void beginHYconfigMode(void)
// {
//     setHYconfigModeState(TRUE);
//     TimeSliceOffset_Register(&m_beginHYconfigMode, Task_beginHYconfigMode
//                                 , beginHYconfigMode_reloadVal, beginHYconfigMode_offset);
// }

// /**
//  * @brief   初始化串口任务，确定使用的协议
//  * @param
//  * @retval
//  */
// void uartTaskInit(void)
// {
//     // if (g_cfgParameter.CommunicationProtocolType == 0x00) {
//     //     uart_judge_handle = read_and_process_uart_data;
//     // } else if (g_cfgParameter.CommunicationProtocolType == 0x01) {
//     //     uart_judge_handle = HY_read_and_process_uart_data;
//     // }
    
//     uart_judge_handle = HY_read_and_process_uart_data;
// }

// /**
//  * @brief   检测有无通信数据传来
//  * @param
//  * @retval
//  */
// void Task_usartJudge(void)
// {
//     /* 检测到对上通信串口有数据启动读取并解析任务 */
//     if (uart_dev_char_present(g_gw485_uart2_handle)) {
//         TimeSliceOffset_Register(&m_usartHandle, Task_usartHandle
//                 , usartHandle_reloadVal, usartHandle_offset);
//     }
// }    

// /**
//  * @brief   读取并解析对上通讯的数据
//  * @param
//  * @retval
//  */
// void Task_usartHandle(void)
// {
//     TimeSliceOffset_Unregister(&m_usartHandle);
//     m_usartHandle.runFlag = 0;
//     uart_judge_handle(g_gw485_uart2_handle);
// }

// /**
//  * @brief   读取并解析配置文件的数据
//  * @param
//  * @retval
//  */
// void Task_usartCfg(void)
// {
//     read_and_process_config_data();
// }

/**
 * @brief   短路保护任务，短路后启动该任务
 * @param
 * @retval
 */
void Task_shortCircuitProtection(void)
{
    static uint8_t num = 0;
    num++;

    /* 设定输出短路保护时间 */
    if (num == g_cfgParameter.shortCircuitJudgmentDelay) {
        num = 0;
        zeroShortCircuit();
        TimeSliceOffset_Unregister(&m_shortCircuitProtection);
        m_shortCircuitProtection.runFlag = 0;

        // /* 仍然过流，彻底关闭输出 */
        // if (readOverCurrState() == FALSE) {
        //     setPowerOutput(FALSE);
        // }
        // /* 不过流，则状态位复位 */
        // else {
        //     setShortCircuitFlag(FALSE);
        // }
    }
}

/**
 * @brief   启动短路保护任务
 * @param
 * @retval
 */
void startShortCircuitProtection(void)
{
    TimeSliceOffset_Register(&m_shortCircuitProtection, Task_shortCircuitProtection
                                , shortCircuitProtection_reloadVal, shortCircuitProtection_offset);
}

/**
 * @brief   关闭短路保护任务
 * @param
 * @retval
 */
void stopShortCircuitProtection(void)
{
    TimeSliceOffset_Unregister(&m_shortCircuitProtection);
    m_shortCircuitProtection.runFlag = 0;
}

/**
 * @brief   过载保护任务，输入不够供给输出后启动该任务
 * @param
 * @retval
 */
void Task_excessiveLoad(void)
{
    static uint8_t num = 0;
    static uint16_t numLong = 0;

    /* 短路保护了则退出过载保护 */
    if (getShortCircuitFlag() == TRUE) {
        num = 0;
        numLong = 0;
        zeroExcessiveLoad();
        setExcessiveLoadFlag(FALSE);
        TimeSliceOffset_Unregister(&m_excessiveLoad);
        m_excessiveLoad.runFlag = 0;
    }

    /* 过载一次 */
    if (getExcessiveLoad() == 1) {
        num++;
    }

    /* 延迟一段时间打开输出接口 */
    if (num == 1 && getExcessiveLoad() == 1) {
        setPowerOutput(TRUE);
    }

    /* 多次过载则关闭输出(关闭输出中断中完成),尝试一段时间后再次输出 */
    if (getExcessiveLoad() >= 2) {
//        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, RESET);
        num = 0;
    }

    /* 仅过载一次，达到时间后关闭该任务 */
    if (num == g_cfgParameter.inputPowerLowJudgmentDelay) {
        num = 0;
        setExcessiveLoadFlag(FALSE);
        TimeSliceOffset_Unregister(&m_excessiveLoad);
        m_excessiveLoad.runFlag = 0;
        return;
    }

    /* 关闭输出后开始计时 */
    if (readPOW_OUT_PCON_State() == FALSE) {
        numLong++;
    }

    /* 达到时间就重新尝试输出 */
    if (numLong == g_cfgParameter.inputPowerLowAgainOutputDelay) {
        numLong = 0;
        TimeSliceOffset_Unregister(&m_excessiveLoad);
        m_excessiveLoad.runFlag = 0;
        setPowerOutput(TRUE);
        setExcessiveLoadFlag(FALSE);
    }
}

/**
 * @brief   启动硬件过载保护任务
 * @param
 * @retval
 */
void startExcessiveLoadProtection(void)
{
    TimeSliceOffset_Register(&m_excessiveLoad, Task_excessiveLoad
                                , excessiveLoad_reloadVal, excessiveLoad_offset);
}

/**
 * @brief   检测总线是否空闲,并且判断有无数据需要发送
 * @param
 * @retval
 */
void Task_busFree(void)
{
    setGwState();
    setBatState();
    check_sendState();
}

// /**
//  * @brief   中断发送任务
//  * @param
//  * @retval
//  */
// void Task_interruptSend(void)
// {
//     // if(check_sendState() == TRUE) {
//     //     TimeSliceOffset_Unregister(&m_interruptSend);
//     //     m_interruptSend.runFlag = 0;
//     // }
// }

// /**
//  * @brief   启动中断发送任务
//  * @param
//  * @retval
//  */
// void startInterruptSendTask(void)
// {
//     TimeSliceOffset_Register(&m_interruptSend, Task_interruptSend
//                                 , interruptSend_reloadVal, interruptSend_offset);
// }

/**
 * @brief   软件短路保护任务，一段时间中连续出现短路，则关闭输出
 * @param
 * @retval
 */
void Task_softShortCircuit(void)
{
    static uint8_t num = 0;

    if (2 == num++) {        
        setPowerOutput(TRUE);
    }

    if (num >= g_cfgParameter.shortCircuitJudgmentDelay) {
        num = 0;
        if (getShortCircuit() == 1) {            
            setShortCircuitFlag(FALSE);
        }
        zeroShortCircuit();
        TimeSliceOffset_Unregister(&m_softShortCircuit);
        m_softShortCircuit.runFlag = 0;
    }    
}


/**
 * @brief   启动软件短路保护任务
 * @param
 * @retval
 */
void startSoftShortCircuitProtection(void)
{
    TimeSliceOffset_Register(&m_softShortCircuit, Task_softShortCircuit
                                , softShortCircuit_reloadVal, softShortCircuit_offset);
}


/**
 * @brief   启动软件解析任务
 * @param
 * @retval
 */
void Task_uart(void)
{
    gw485DataAnalysis(g_gw485_uart2_handle);
}


/**
 * @brief   将记录下来的事件存入flash中
 * @param
 * @retval
 */
void Task_SOE(void)
{
    setEventsOrderRecord();
}