#include "task.h"
#include "inFlash.h"
#include "parameter.h"
#include "FM_GPIO.h"
#include "chargControlEnum.h"
#include "bl_chargControl.h"

/**
 * @brief   启动时初始化各任务
 * @param   None
 * @retval  None
 *
 */
void task_Init(void)
{
    TimeSliceOffset_Register(&m_runled, Task_Runled, runled_reloadVal, runled_offset);
    TimeSliceOffset_Register(&m_wdi, Task_wdi, wdi_reloadVal, wdi_offset);





}

/**
 * @brief   运行指示灯任务
 * @param   None
 * @retval  None
 *
 */
STR_TimeSliceOffset m_runled;
void Task_Runled(void)
{
    RUN_LED();
}

/**
 * @brief   喂狗任务
 * @param   None
 * @retval  None
 */
STR_TimeSliceOffset m_wdi;
void Task_wdi(void)
{
    /* 每天复位一次，复位前将电量信息写入flash中 */
    static uint32_t temp = 60 * 60 * 24;
    if (!(--temp)) {
        temp = 0;
        float tempF;
        tempF = getTotalElectricityConsumption();
        savetotalElectricityConsumption(&tempF);
        tempF = getTotalChargCapacity();
        savetotalChargCapacity(&tempF);
        NVIC_SystemReset();
    }

    feedDog();
}

/**
 * @brief   刷新并判断数据
 * @param   None
 * @retval  None
 *
 */
STR_TimeSliceOffset m_refreshJudgeData;
void Task_refreshJudgeData(void)
{
    /* 获取数据 */
    setInputVoltage();
    setHighSideMosTemperature();

    

    /* 判断有无电池 */
    if (getBatteryState() == FALSE && (getChargBatteryCurrent() > 1 || getChargBatteryCurrent() < -1)
            && getOutputVoltage() < 14.2f) {
        setBatteryState(TRUE);
    }

    /* 温度检测 */
    if () {
        
    }
    


}

/**
 * @brief   停止充电或系统启动时后开启该任务，每隔一段时间检测开路电压
 *          检测电池电压是否大于充电电压，大于则开启充电，否则关闭充电
 *          能否达到充电标准，达到后检测电压判断系统中是否有电池同时启
 *          动软启动任务
 * @param   None
 * @retval  None
 *
 */
STR_TimeSliceOffset g_startControl;
void Task_startControl(void)
{
    if (getSolarInCircuitVoltage() > g_cfgParameter.startSolarOpenCircuitV) {
        TimeSliceOffset_Unregister(&g_startControl);
        g_startControl.runFlag = 0;
        if (getOutputVoltage() > 10) {
            setBatteryState(TRUE);
        } else {
            setBatteryState(FALSE);
        }
        TimeSliceOffset_Register(&m_softStart, Task_softStart, softStart_reloadVal, softStart_offset);
    }
}

/**
 * @brief   软启动
 * @param
 * @retval
 *
 */
STR_TimeSliceOffset m_softStart;
void Task_softStart(void)
{    
    static uint16_t num = 0;
    static float dutyRatio = 0;
    num++;

    if (num < 5) {
        set_pwmPulse(100);
    }

    else if (num > 70 || dutyRatio > 0.75f) {
        TimeSliceOffset_Unregister(&m_softStart);
        m_softStart.runFlag = 0;

        dutyRatio = 0;
        num = 0;
        setDutyRatio(0.75);
        set_pwmDutyRatio(getDutyRatio());

        if (getBatteryState() == TRUE) {
            setMPPT_Mode(MPPT);
        } else {
            setMPPT_Mode(floatCharg);
        }
        setChargControlFlag(TRUE);
    }

    else {        
        setDutyRatio(getDutyRatio() + 0.05f);
        set_pwmDutyRatio(getDutyRatio());
    }
}

/**
 * @brief   满足一定条件后启动该任务，测量回路阻抗
 * @param
 * @retval
 */
STR_TimeSliceOffset m_impedanceCalculation;
void Task_impedanceCalculation(void)
{
    static uint8_t num = 0;
    static float currOne = 0;
    static float voltOne = 0;
    static float currTwo = 0;
    static float voltTwo = 0;

    num++;

    if (num == 1) {
        setChargControlFlag(FALSE);
        setDutyRatio(0.7);
        set_pwmDutyRatio(getDutyRatio());
        return;
    }

    if (num == 11) {
        currOne = getChargCurrent() - getDischargCurrent();
        voltOne = getOutputVoltage();
        setDutyRatio(0.85);
        set_pwmDutyRatio(getDutyRatio());
        return;
    }

    if (num == 21) {
        TimeSliceOffset_Unregister(&m_impedanceCalculation);
        m_impedanceCalculation.runFlag = 0;

        currTwo = getChargCurrent() - getDischargCurrent();
        voltTwo = getOutputVoltage();
        float tempLoopImpedance = 0;
        tempLoopImpedance = (voltOne - voltTwo) / (currOne - currTwo);

        /* 判断回路阻抗是否合理 */
        if (tempLoopImpedance < 1.0f && tempLoopImpedance > 0.05f) {
            g_cfgParameter.loopImpedance = tempLoopImpedance;
            saveLoopImpedance(&g_cfgParameter.loopImpedance);
        }
        num = 0;

        setMPPT_Mode(MPPT);        
        setChargControlFlag(TRUE);
        return;
    }
}