pengsx
/
gateway
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
gateway/Peripheral/src/ch32v30x_rcc.c

1478 lines
42 KiB
C
Raw Permalink Normal View History

no message
2024-07-13 02:22:47 +00:00
/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v30x_rcc.c
* Author : WCH
* Version : V1.0.0
* Date : 2024/03/06
* Description : This file provides all the RCC firmware functions.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#include "ch32v30x_rcc.h"
/* RCC registers bit address in the alias region */
#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
/* BDCTLR Register */
#define BDCTLR_OFFSET (RCC_OFFSET + 0x20)
/* RCC registers bit mask */
/* CTLR register bit mask */
#define CTLR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF)
#define CTLR_HSEBYP_Set ((uint32_t)0x00040000)
#define CTLR_HSEON_Reset ((uint32_t)0xFFFEFFFF)
#define CTLR_HSEON_Set ((uint32_t)0x00010000)
#define CTLR_HSITRIM_Mask ((uint32_t)0xFFFFFF07)
#define CFGR0_PLL_Mask ((uint32_t)0xFFC0FFFF)
#define CFGR0_PLL_Mask_1 ((uint32_t)0xFFC2FFFF)
#define CFGR0_PLLMull_Mask ((uint32_t)0x003C0000)
#define CFGR0_PLLSRC_Mask ((uint32_t)0x00010000)
#define CFGR0_PLLXTPRE_Mask ((uint32_t)0x00020000)
#define CFGR0_SWS_Mask ((uint32_t)0x0000000C)
#define CFGR0_SW_Mask ((uint32_t)0xFFFFFFFC)
#define CFGR0_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F)
#define CFGR0_HPRE_Set_Mask ((uint32_t)0x000000F0)
#define CFGR0_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF)
#define CFGR0_PPRE1_Set_Mask ((uint32_t)0x00000700)
#define CFGR0_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF)
#define CFGR0_PPRE2_Set_Mask ((uint32_t)0x00003800)
#define CFGR0_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF)
#define CFGR0_ADCPRE_Set_Mask ((uint32_t)0x0000C000)
/* RSTSCKR register bit mask */
#define RSTSCKR_RMVF_Set ((uint32_t)0x01000000)
/* CFGR2 register bit mask */
#define CFGR2_PREDIV1SRC ((uint32_t)0x00010000)
#define CFGR2_PREDIV1 ((uint32_t)0x0000000F)
#define CFGR2_PREDIV2 ((uint32_t)0x000000F0)
#define CFGR2_PLL2MUL ((uint32_t)0x00000F00)
#define CFGR2_PLL3MUL ((uint32_t)0x0000F000)
/* RCC Flag Mask */
#define FLAG_Mask ((uint8_t)0x1F)
/* INTR register byte 2 (Bits[15:8]) base address */
#define INTR_BYTE2_ADDRESS ((uint32_t)0x40021009)
/* INTR register byte 3 (Bits[23:16]) base address */
#define INTR_BYTE3_ADDRESS ((uint32_t)0x4002100A)
/* CFGR0 register byte 4 (Bits[31:24]) base address */
#define CFGR0_BYTE4_ADDRESS ((uint32_t)0x40021007)
/* BDCTLR register base address */
#define BDCTLR_ADDRESS (PERIPH_BASE + BDCTLR_OFFSET)
static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
/*********************************************************************
* @fn RCC_DeInit
*
* @brief Resets the RCC clock configuration to the default reset state.
* Note-
* HSE can not be stopped if it is used directly or through the PLL as system clock.
* @return none
*/
void RCC_DeInit(void)
{
RCC->CTLR |= (uint32_t)0x00000001;
#ifdef CH32V30x_D8C
RCC->CFGR0 &= (uint32_t)0xF8FF0000;
#else
RCC->CFGR0 &= (uint32_t)0xF0FF0000;
#endif
RCC->CTLR &= (uint32_t)0xFEF6FFFF;
RCC->CTLR &= (uint32_t)0xFFFBFFFF;
RCC->CFGR0 &= (uint32_t)0xFF80FFFF;
#ifdef CH32V30x_D8C
RCC->CTLR &= (uint32_t)0xEBFFFFFF;
RCC->INTR = 0x00FF0000;
RCC->CFGR2 = 0x00000000;
#else
RCC->INTR = 0x009F0000;
#endif
}
/*********************************************************************
* @fn RCC_HSEConfig
*
* @brief Configures the External High Speed oscillator (HSE).
*
* @param RCC_HSE -
* RCC_HSE_OFF - HSE oscillator OFF.
* RCC_HSE_ON - HSE oscillator ON.
* RCC_HSE_Bypass - HSE oscillator bypassed with external clock.
* Note-
* HSE can not be stopped if it is used directly or through the PLL as system clock.
* @return none
*/
void RCC_HSEConfig(uint32_t RCC_HSE)
{
RCC->CTLR &= CTLR_HSEON_Reset;
RCC->CTLR &= CTLR_HSEBYP_Reset;
switch(RCC_HSE)
{
case RCC_HSE_ON:
RCC->CTLR |= CTLR_HSEON_Set;
break;
case RCC_HSE_Bypass:
RCC->CTLR |= CTLR_HSEBYP_Set | CTLR_HSEON_Set;
break;
default:
break;
}
}
/*********************************************************************
* @fn RCC_WaitForHSEStartUp
*
* @brief Waits for HSE start-up.
*
* @return READY - HSE oscillator is stable and ready to use.
* NoREADY - HSE oscillator not yet ready.
*/
ErrorStatus RCC_WaitForHSEStartUp(void)
{
__IO uint32_t StartUpCounter = 0;
ErrorStatus status = NoREADY;
FlagStatus HSEStatus = RESET;
do
{
HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
StartUpCounter++;
} while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET));
if(RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
{
status = READY;
}
else
{
status = NoREADY;
}
return (status);
}
/*********************************************************************
* @fn RCC_AdjustHSICalibrationValue
*
* @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
*
* @param HSICalibrationValue - specifies the calibration trimming value.
* This parameter must be a number between 0 and 0x1F.
*
* @return none
*/
void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CTLR;
tmpreg &= CTLR_HSITRIM_Mask;
tmpreg |= (uint32_t)HSICalibrationValue << 3;
RCC->CTLR = tmpreg;
}
/*********************************************************************
* @fn RCC_HSICmd
*
* @brief Enables or disables the Internal High Speed oscillator (HSI).
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_HSICmd(FunctionalState NewState)
{
if(NewState)
{
RCC->CTLR |= (1 << 0);
}
else
{
RCC->CTLR &= ~(1 << 0);
}
}
/*********************************************************************
* @fn RCC_PLLConfig
*
* @brief Configures the PLL clock source and multiplication factor.
*
* @param RCC_PLLSource - specifies the PLL entry clock source.
* RCC_PLLSource_HSI_Div2 - HSI oscillator clock divided by 2
* selected as PLL clock entry.
* RCC_PLLSource_PREDIV1 - PREDIV1 clock selected as PLL clock
* entry.
* RCC_PLLMul - specifies the PLL multiplication factor.
* This parameter can be RCC_PLLMul_x where x:[2,16].
* For CH32V307 -
* RCC_PLLMul_18_EXTEN
* RCC_PLLMul_3_EXTEN
* RCC_PLLMul_4_EXTEN
* RCC_PLLMul_5_EXTEN
* RCC_PLLMul_6_EXTEN
* RCC_PLLMul_7_EXTEN
* RCC_PLLMul_8_EXTEN
* RCC_PLLMul_9_EXTEN
* RCC_PLLMul_10_EXTEN
* RCC_PLLMul_11_EXTEN
* RCC_PLLMul_12_EXTEN
* RCC_PLLMul_13_EXTEN
* RCC_PLLMul_14_EXTEN
* RCC_PLLMul_6_5_EXTEN
* RCC_PLLMul_15_EXTEN
* RCC_PLLMul_16_EXTEN
* For other CH32V30x -
* RCC_PLLMul_2
* RCC_PLLMul_3
* RCC_PLLMul_4
* RCC_PLLMul_5
* RCC_PLLMul_6
* RCC_PLLMul_7
* RCC_PLLMul_8
* RCC_PLLMul_9
* RCC_PLLMul_10
* RCC_PLLMul_11
* RCC_PLLMul_12
* RCC_PLLMul_13
* RCC_PLLMul_14
* RCC_PLLMul_15
* RCC_PLLMul_16
* RCC_PLLMul_18
*
* @return none
*/
void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR0;
if(((*(uint32_t *)0x1FFFF70C) & (1 << 14)) != (1 << 14))
{ /* for other CH32V30x */
tmpreg &= CFGR0_PLL_Mask;
}
else
{ /* for CH32V307 */
tmpreg &= CFGR0_PLL_Mask_1;
}
tmpreg |= RCC_PLLSource | RCC_PLLMul;
RCC->CFGR0 = tmpreg;
}
/*********************************************************************
* @fn RCC_PLLCmd
*
* @brief Enables or disables the PLL.
* Note-The PLL can not be disabled if it is used as system clock.
*
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_PLLCmd(FunctionalState NewState)
{
if(NewState)
{
RCC->CTLR |= (1 << 24);
}
else
{
RCC->CTLR &= ~(1 << 24);
}
}
/*********************************************************************
* @fn RCC_SYSCLKConfig
*
* @brief Configures the system clock (SYSCLK).
*
* @param RCC_SYSCLKSource - specifies the clock source used as system clock.
* RCC_SYSCLKSource_HSI - HSI selected as system clock.
* RCC_SYSCLKSource_HSE - HSE selected as system clock.
* RCC_SYSCLKSource_PLLCLK - PLL selected as system clock.
*
* @return none
*/
void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR0;
tmpreg &= CFGR0_SW_Mask;
tmpreg |= RCC_SYSCLKSource;
RCC->CFGR0 = tmpreg;
}
/*********************************************************************
* @fn RCC_GetSYSCLKSource
*
* @brief Returns the clock source used as system clock.
*
* @return 0x00 - HSI used as system clock.
* 0x04 - HSE used as system clock.
* 0x08 - PLL used as system clock.
*/
uint8_t RCC_GetSYSCLKSource(void)
{
return ((uint8_t)(RCC->CFGR0 & CFGR0_SWS_Mask));
}
/*********************************************************************
* @fn RCC_HCLKConfig
*
* @brief Configures the AHB clock (HCLK).
*
* @param RCC_SYSCLK - defines the AHB clock divider. This clock is derived from
* the system clock (SYSCLK).
* RCC_SYSCLK_Div1 - AHB clock = SYSCLK.
* RCC_SYSCLK_Div2 - AHB clock = SYSCLK/2.
* RCC_SYSCLK_Div4 - AHB clock = SYSCLK/4.
* RCC_SYSCLK_Div8 - AHB clock = SYSCLK/8.
* RCC_SYSCLK_Div16 - AHB clock = SYSCLK/16.
* RCC_SYSCLK_Div64 - AHB clock = SYSCLK/64.
* RCC_SYSCLK_Div128 - AHB clock = SYSCLK/128.
* RCC_SYSCLK_Div256 - AHB clock = SYSCLK/256.
* RCC_SYSCLK_Div512 - AHB clock = SYSCLK/512.
*
* @return none
*/
void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR0;
tmpreg &= CFGR0_HPRE_Reset_Mask;
tmpreg |= RCC_SYSCLK;
RCC->CFGR0 = tmpreg;
}
/*********************************************************************
* @fn RCC_PCLK1Config
*
* @brief Configures the Low Speed APB clock (PCLK1).
*
* @param RCC_HCLK - defines the APB1 clock divider. This clock is derived from
* the AHB clock (HCLK).
* RCC_HCLK_Div1 - APB1 clock = HCLK.
* RCC_HCLK_Div2 - APB1 clock = HCLK/2.
* RCC_HCLK_Div4 - APB1 clock = HCLK/4.
* RCC_HCLK_Div8 - APB1 clock = HCLK/8.
* RCC_HCLK_Div16 - APB1 clock = HCLK/16.
*
* @return none
*/
void RCC_PCLK1Config(uint32_t RCC_HCLK)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR0;
tmpreg &= CFGR0_PPRE1_Reset_Mask;
tmpreg |= RCC_HCLK;
RCC->CFGR0 = tmpreg;
}
/*********************************************************************
* @fn RCC_PCLK2Config
*
* @brief Configures the High Speed APB clock (PCLK2).
*
* @param RCC_HCLK - defines the APB2 clock divider. This clock is derived from
* the AHB clock (HCLK).
* RCC_HCLK_Div1 - APB2 clock = HCLK.
* RCC_HCLK_Div2 - APB2 clock = HCLK/2.
* RCC_HCLK_Div4 - APB2 clock = HCLK/4.
* RCC_HCLK_Div8 - APB2 clock = HCLK/8.
* RCC_HCLK_Div16 - APB2 clock = HCLK/16.
*
* @return none
*/
void RCC_PCLK2Config(uint32_t RCC_HCLK)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR0;
tmpreg &= CFGR0_PPRE2_Reset_Mask;
tmpreg |= RCC_HCLK << 3;
RCC->CFGR0 = tmpreg;
}
/*********************************************************************
* @fn RCC_ITConfig
*
* @brief Enables or disables the specified RCC interrupts.
*
* @param RCC_IT - specifies the RCC interrupt sources to be enabled or disabled.
* RCC_IT_LSIRDY - LSI ready interrupt.
* RCC_IT_LSERDY - LSE ready interrupt.
* RCC_IT_HSIRDY - HSI ready interrupt.
* RCC_IT_HSERDY - HSE ready interrupt.
* RCC_IT_PLLRDY - PLL ready interrupt.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
{
if(NewState != DISABLE)
{
*(__IO uint8_t *)INTR_BYTE2_ADDRESS |= RCC_IT;
}
else
{
*(__IO uint8_t *)INTR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT;
}
}
/*********************************************************************
* @fn RCC_ADCCLKConfig
*
* @brief Configures the ADC clock (ADCCLK).
*
* @param RCC_PCLK2 - defines the ADC clock divider. This clock is derived from
* the APB2 clock (PCLK2).
* RCC_PCLK2_Div2 - ADC clock = PCLK2/2.
* RCC_PCLK2_Div4 - ADC clock = PCLK2/4.
* RCC_PCLK2_Div6 - ADC clock = PCLK2/6.
* RCC_PCLK2_Div8 - ADC clock = PCLK2/8.
*
* @return none
*/
void RCC_ADCCLKConfig(uint32_t RCC_PCLK2)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR0;
tmpreg &= CFGR0_ADCPRE_Reset_Mask;
tmpreg |= RCC_PCLK2;
RCC->CFGR0 = tmpreg;
}
/*********************************************************************
* @fn RCC_LSEConfig
*
* @brief Configures the External Low Speed oscillator (LSE).
*
* @param RCC_LSE - specifies the new state of the LSE.
* RCC_LSE_OFF - LSE oscillator OFF.
* RCC_LSE_ON - LSE oscillator ON.
* RCC_LSE_Bypass - LSE oscillator bypassed with external clock.
*
* @return none
*/
void RCC_LSEConfig(uint8_t RCC_LSE)
{
*(__IO uint8_t *)BDCTLR_ADDRESS = RCC_LSE_OFF;
*(__IO uint8_t *)BDCTLR_ADDRESS = RCC_LSE_OFF;
switch(RCC_LSE)
{
case RCC_LSE_ON:
*(__IO uint8_t *)BDCTLR_ADDRESS = RCC_LSE_ON;
break;
case RCC_LSE_Bypass:
*(__IO uint8_t *)BDCTLR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON;
break;
default:
break;
}
}
/*********************************************************************
* @fn RCC_LSICmd
*
* @brief Enables or disables the Internal Low Speed oscillator (LSI).
* Note-
* LSI can not be disabled if the IWDG is running.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_LSICmd(FunctionalState NewState)
{
if(NewState)
{
RCC->RSTSCKR |= (1 << 0);
}
else
{
RCC->RSTSCKR &= ~(1 << 0);
}
}
/*********************************************************************
* @fn RCC_RTCCLKConfig
*
* @brief Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
*
* @param RCC_RTCCLKSource - specifies the RTC clock source.
* RCC_RTCCLKSource_LSE - LSE selected as RTC clock.
* RCC_RTCCLKSource_LSI - LSI selected as RTC clock.
* RCC_RTCCLKSource_HSE_Div128 - HSE clock divided by 128 selected as RTC clock.
* Note-
* Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
* @return none
*/
void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource)
{
RCC->BDCTLR |= RCC_RTCCLKSource;
}
/*********************************************************************
* @fn RCC_RTCCLKCmd
*
* @brief This function must be used only after the RTC clock was selected
* using the RCC_RTCCLKConfig function.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_RTCCLKCmd(FunctionalState NewState)
{
if(NewState)
{
RCC->BDCTLR |= (1 << 15);
}
else
{
RCC->BDCTLR &= ~(1 << 15);
}
}
/*********************************************************************
* @fn RCC_GetClocksFreq
*
* @brief The result of this function could be not correct when using
* fractional value for HSE crystal.
*
* @param RCC_Clocks - pointer to a RCC_ClocksTypeDef structure which will hold
* the clocks frequencies.
*
* @return none
*/
void RCC_GetClocksFreq(RCC_ClocksTypeDef *RCC_Clocks)
{
uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0;
uint8_t Pll_6_5 = 0;
#ifdef CH32V30x_D8C
uint8_t Pll2mull = 0;
#endif
tmp = RCC->CFGR0 & CFGR0_SWS_Mask;
switch(tmp)
{
case 0x00:
RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
break;
case 0x04:
RCC_Clocks->SYSCLK_Frequency = HSE_VALUE;
break;
case 0x08:
pllmull = RCC->CFGR0 & CFGR0_PLLMull_Mask;
pllsource = RCC->CFGR0 & CFGR0_PLLSRC_Mask;
pllmull = (pllmull >> 18) + 2;
if(((*(uint32_t *)0x1FFFF70C) & (1 << 14)) != (1 << 14))
{ /* for other CH32V30x */
if(pllmull == 17)
pllmull = 18;
}
else
{ /* for CH32V307 */
if(pllmull == 2)
pllmull = 18;
if(pllmull == 15)
{
pllmull = 13; /* *6.5 */
Pll_6_5 = 1;
}
if(pllmull == 16)
pllmull = 15;
if(pllmull == 17)
pllmull = 16;
}
if(pllsource == 0x00)
{
if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE)
{
RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE)*pllmull;
}
else
{
RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
}
}
else
{
#ifdef CH32V30x_D8
if((RCC->CFGR0 & CFGR0_PLLXTPRE_Mask) != (uint32_t)RESET)
{
RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull;
}
else
{
RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull;
}
#else
if(RCC->CFGR2 & (1<<16)){ /* PLL2 */
RCC_Clocks->SYSCLK_Frequency = HSE_VALUE/(((RCC->CFGR2 & 0xF0)>>4) + 1); /* PREDIV2 */
Pll2mull = (uint8_t)((RCC->CFGR2 & 0xF00)>>8);
if(Pll2mull == 0) RCC_Clocks->SYSCLK_Frequency = (RCC_Clocks->SYSCLK_Frequency * 5)>>1;
else if(Pll2mull == 1) RCC_Clocks->SYSCLK_Frequency = (RCC_Clocks->SYSCLK_Frequency * 25)>>1;
else if(Pll2mull == 15) RCC_Clocks->SYSCLK_Frequency = RCC_Clocks->SYSCLK_Frequency * 20;
else RCC_Clocks->SYSCLK_Frequency = RCC_Clocks->SYSCLK_Frequency * (Pll2mull + 2);
RCC_Clocks->SYSCLK_Frequency = RCC_Clocks->SYSCLK_Frequency/((RCC->CFGR2 & 0xF) + 1); /* PREDIV1 */
}
else{/* HSE */
RCC_Clocks->SYSCLK_Frequency = HSE_VALUE/((RCC->CFGR2 & 0xF) + 1); /* PREDIV1 */
}
RCC_Clocks->SYSCLK_Frequency = RCC_Clocks->SYSCLK_Frequency * pllmull;
#endif
}
if(Pll_6_5 == 1)
RCC_Clocks->SYSCLK_Frequency = (RCC_Clocks->SYSCLK_Frequency / 2);
break;
default:
RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
break;
}
tmp = RCC->CFGR0 & CFGR0_HPRE_Set_Mask;
tmp = tmp >> 4;
presc = APBAHBPrescTable[tmp];
RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
tmp = RCC->CFGR0 & CFGR0_PPRE1_Set_Mask;
tmp = tmp >> 8;
presc = APBAHBPrescTable[tmp];
RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
tmp = RCC->CFGR0 & CFGR0_PPRE2_Set_Mask;
tmp = tmp >> 11;
presc = APBAHBPrescTable[tmp];
RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
tmp = RCC->CFGR0 & CFGR0_ADCPRE_Set_Mask;
tmp = tmp >> 14;
presc = ADCPrescTable[tmp];
RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc;
}
/*********************************************************************
* @fn RCC_AHBPeriphClockCmd
*
* @brief Enables or disables the AHB peripheral clock.
*
* @param RCC_AHBPeriph - specifies the AHB peripheral to gates its clock.
* RCC_AHBPeriph_DMA1.
* RCC_AHBPeriph_DMA2.
* RCC_AHBPeriph_SRAM.
* RCC_AHBPeriph_CRC.
* RCC_AHBPeriph_FSMC
* RCC_AHBPeriph_RNG
* RCC_AHBPeriph_SDIO
* RCC_AHBPeriph_USBHS
* RCC_AHBPeriph_USBFS
* RCC_AHBPeriph_DVP
* RCC_AHBPeriph_ETH_MAC
* RCC_AHBPeriph_ETH_MAC_Tx
* RCC_AHBPeriph_ETH_MAC_Rx
* Note-
* SRAM clock can be disabled only during sleep mode.
* NewState: ENABLE or DISABLE.
*
* @return none
*/
void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->AHBPCENR |= RCC_AHBPeriph;
}
else
{
RCC->AHBPCENR &= ~RCC_AHBPeriph;
}
}
/*********************************************************************
* @fn RCC_APB2PeriphClockCmd
*
* @brief Enables or disables the High Speed APB (APB2) peripheral clock.
*
* @param RCC_APB2Periph - specifies the APB2 peripheral to gates its clock.
* RCC_APB2Periph_AFIO.
* RCC_APB2Periph_GPIOA.
* RCC_APB2Periph_GPIOB.
* RCC_APB2Periph_GPIOC.
* RCC_APB2Periph_GPIOD.
* RCC_APB2Periph_GPIOE
* RCC_APB2Periph_ADC1.
* RCC_APB2Periph_ADC2
* RCC_APB2Periph_TIM1.
* RCC_APB2Periph_SPI1.
* RCC_APB2Periph_TIM8
* RCC_APB2Periph_USART1.
* RCC_APB2Periph_TIM9
* RCC_APB2Periph_TIM10
* NewState - ENABLE or DISABLE
*
* @return none
*/
void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->APB2PCENR |= RCC_APB2Periph;
}
else
{
RCC->APB2PCENR &= ~RCC_APB2Periph;
}
}
/*********************************************************************
* @fn RCC_APB1PeriphClockCmd
*
* @brief Enables or disables the Low Speed APB (APB1) peripheral clock.
*
* @param RCC_APB1Periph - specifies the APB1 peripheral to gates its clock.
* RCC_APB1Periph_TIM2.
* RCC_APB1Periph_TIM3.
* RCC_APB1Periph_TIM4.
* RCC_APB1Periph_TIM5
* RCC_APB1Periph_TIM6
* RCC_APB1Periph_TIM7
* RCC_APB1Periph_UART6
* RCC_APB1Periph_UART7
* RCC_APB1Periph_UART8
* RCC_APB1Periph_WWDG.
* RCC_APB1Periph_SPI2.
* RCC_APB1Periph_SPI3.
* RCC_APB1Periph_USART2.
* RCC_APB1Periph_USART3.
* RCC_APB1Periph_UART4
* RCC_APB1Periph_UART5
* RCC_APB1Periph_I2C1.
* RCC_APB1Periph_I2C2.
* RCC_APB1Periph_USB.
* RCC_APB1Periph_CAN1.
* RCC_APB1Periph_BKP.
* RCC_APB1Periph_PWR.
* RCC_APB1Periph_DAC.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->APB1PCENR |= RCC_APB1Periph;
}
else
{
RCC->APB1PCENR &= ~RCC_APB1Periph;
}
}
/*********************************************************************
* @fn RCC_APB2PeriphResetCmd
*
* @brief Forces or releases High Speed APB (APB2) peripheral reset.
*
* @param RCC_APB2Periph - specifies the APB2 peripheral to reset.
* RCC_APB2Periph_AFIO.
* RCC_APB2Periph_GPIOA.
* RCC_APB2Periph_GPIOB.
* RCC_APB2Periph_GPIOC.
* RCC_APB2Periph_GPIOD.
* RCC_APB2Periph_GPIOE
* RCC_APB2Periph_ADC1.
* RCC_APB2Periph_ADC2
* RCC_APB2Periph_TIM1.
* RCC_APB2Periph_SPI1.
* RCC_APB2Periph_TIM8
* RCC_APB2Periph_USART1.
* RCC_APB2Periph_TIM9
* RCC_APB2Periph_TIM10
* NewState - ENABLE or DISABLE
*
* @return none
*/
void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->APB2PRSTR |= RCC_APB2Periph;
}
else
{
RCC->APB2PRSTR &= ~RCC_APB2Periph;
}
}
/*********************************************************************
* @fn RCC_APB1PeriphResetCmd
*
* @brief Forces or releases Low Speed APB (APB1) peripheral reset.
*
* @param RCC_APB1Periph - specifies the APB1 peripheral to reset.
* RCC_APB1Periph_TIM2.
* RCC_APB1Periph_TIM3.
* RCC_APB1Periph_TIM4.
* RCC_APB1Periph_TIM5
* RCC_APB1Periph_TIM6
* RCC_APB1Periph_TIM7
* RCC_APB1Periph_UART6
* RCC_APB1Periph_UART7
* RCC_APB1Periph_UART8
* RCC_APB1Periph_WWDG.
* RCC_APB1Periph_SPI2.
* RCC_APB1Periph_SPI3.
* RCC_APB1Periph_USART2.
* RCC_APB1Periph_USART3.
* RCC_APB1Periph_UART4
* RCC_APB1Periph_UART5
* RCC_APB1Periph_I2C1.
* RCC_APB1Periph_I2C2.
* RCC_APB1Periph_USB.
* RCC_APB1Periph_CAN1.
* RCC_APB1Periph_BKP.
* RCC_APB1Periph_PWR.
* RCC_APB1Periph_DAC.
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->APB1PRSTR |= RCC_APB1Periph;
}
else
{
RCC->APB1PRSTR &= ~RCC_APB1Periph;
}
}
/*********************************************************************
* @fn RCC_BackupResetCmd
*
* @brief Forces or releases the Backup domain reset.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_BackupResetCmd(FunctionalState NewState)
{
if(NewState)
{
RCC->BDCTLR |= (1 << 16);
}
else
{
RCC->BDCTLR &= ~(1 << 16);
}
}
/*********************************************************************
* @fn RCC_ClockSecuritySystemCmd
*
* @brief Enables or disables the Clock Security System.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
{
if(NewState)
{
RCC->CTLR |= (1 << 19);
}
else
{
RCC->CTLR &= ~(1 << 19);
}
}
/*********************************************************************
* @fn RCC_MCOConfig
*
* @brief Selects the clock source to output on MCO pin.
*
* @param RCC_MCO - specifies the clock source to output.
* RCC_MCO_NoClock - No clock selected.
* RCC_MCO_SYSCLK - System clock selected.
* RCC_MCO_HSI - HSI oscillator clock selected.
* RCC_MCO_HSE - HSE oscillator clock selected.
* RCC_MCO_PLLCLK_Div2 - PLL clock divided by 2 selected.
* RCC_MCO_PLL2CLK - PLL2 clock selected
* RCC_MCO_PLL3CLK_Div2 - PLL3 clock divided by 2 selected
* RCC_MCO_XT1 - External 3-25 MHz oscillator clock selected
* RCC_MCO_PLL3CLK - PLL3 clock selected
*
* @return none
*/
void RCC_MCOConfig(uint8_t RCC_MCO)
{
*(__IO uint8_t *)CFGR0_BYTE4_ADDRESS = RCC_MCO;
}
/*********************************************************************
* @fn RCC_GetFlagStatus
*
* @brief Checks whether the specified RCC flag is set or not.
*
* @param RCC_FLAG - specifies the flag to check.
* RCC_FLAG_HSIRDY - HSI oscillator clock ready.
* RCC_FLAG_HSERDY - HSE oscillator clock ready.
* RCC_FLAG_PLLRDY - PLL clock ready.
* RCC_FLAG_PLL2RDY - PLL2 clock ready.
* RCC_FLAG_PLL3RDY - PLL3 clock ready.
* RCC_FLAG_LSERDY - LSE oscillator clock ready.
* RCC_FLAG_LSIRDY - LSI oscillator clock ready.
* RCC_FLAG_PINRST - Pin reset.
* RCC_FLAG_PORRST - POR/PDR reset.
* RCC_FLAG_SFTRST - Software reset.
* RCC_FLAG_IWDGRST - Independent Watchdog reset.
* RCC_FLAG_WWDGRST - Window Watchdog reset.
* RCC_FLAG_LPWRRST - Low Power reset.
*
* @return FlagStatus - SET or RESET.
*/
FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
{
uint32_t tmp = 0;
uint32_t statusreg = 0;
FlagStatus bitstatus = RESET;
tmp = RCC_FLAG >> 5;
if(tmp == 1)
{
statusreg = RCC->CTLR;
}
else if(tmp == 2)
{
statusreg = RCC->BDCTLR;
}
else
{
statusreg = RCC->RSTSCKR;
}
tmp = RCC_FLAG & FLAG_Mask;
if((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn RCC_ClearFlag
*
* @brief Clears the RCC reset flags.
* Note-
* The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
* RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
* @return none
*/
void RCC_ClearFlag(void)
{
RCC->RSTSCKR |= RSTSCKR_RMVF_Set;
}
/*********************************************************************
* @fn RCC_GetITStatus
*
* @brief Checks whether the specified RCC interrupt has occurred or not.
*
* @param RCC_IT - specifies the RCC interrupt source to check.
* RCC_IT_LSIRDY - LSI ready interrupt.
* RCC_IT_LSERDY - LSE ready interrupt.
* RCC_IT_HSIRDY - HSI ready interrupt.
* RCC_IT_HSERDY - HSE ready interrupt.
* RCC_IT_PLLRDY - PLL ready interrupt.
* RCC_IT_PLL2RDY - PLL2 ready interrupt.
* RCC_IT_PLL3RDY - PLL3 ready interrupt.
* RCC_IT_CSS - Clock Security System interrupt.
*
* @return ITStatus - SET or RESET.
*/
ITStatus RCC_GetITStatus(uint8_t RCC_IT)
{
ITStatus bitstatus = RESET;
if((RCC->INTR & RCC_IT) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
return bitstatus;
}
/*********************************************************************
* @fn RCC_ClearITPendingBit
*
* @brief Clears the RCC's interrupt pending bits.
*
* @param RCC_IT - specifies the interrupt pending bit to clear.
* RCC_IT_LSIRDY - LSI ready interrupt.
* RCC_IT_LSERDY - LSE ready interrupt.
* RCC_IT_HSIRDY - HSI ready interrupt.
* RCC_IT_HSERDY - HSE ready interrupt.
* RCC_IT_PLLRDY - PLL ready interrupt.
* RCC_IT_PLL2RDY - PLL2 ready interrupt.
* RCC_IT_PLL3RDY - PLL3 ready interrupt.
* RCC_IT_CSS - Clock Security System interrupt.
*
* @return none
*/
void RCC_ClearITPendingBit(uint8_t RCC_IT)
{
*(__IO uint8_t *)INTR_BYTE3_ADDRESS = RCC_IT;
}
/*********************************************************************
* @fn RCC_PREDIV1Config
*
* @brief Configures the PREDIV1 division factor.
*
* @param RCC_PREDIV1_Source - specifies the PREDIV1 clock source.
* RCC_PREDIV1_Source_HSE - HSE selected as PREDIV1 clock
* RCC_PREDIV1_Source_PLL2 - PLL2 selected as PREDIV1 clock
* RCC_PREDIV1_Div - specifies the PREDIV1 clock division factor.
* This parameter can be RCC_PREDIV1_Divx where x[1,16]
* Note-
* - This function must be used only when the PLL is disabled.
*
* @return none
*/
void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR2;
tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC);
tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div;
RCC->CFGR2 = tmpreg;
}
/*********************************************************************
* @fn RCC_PREDIV2Config
*
* @brief Configures the PREDIV2 division factor.
*
* @param RCC_PREDIV2_Div - specifies the PREDIV2 clock division factor.
* This parameter can be RCC_PREDIV2_Divx where x:[1,16]
* Note-
* - This function must be used only when both PLL2 and PLL3 are disabled.
*
* @return none
*/
void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR2;
tmpreg &= ~CFGR2_PREDIV2;
tmpreg |= RCC_PREDIV2_Div;
RCC->CFGR2 = tmpreg;
}
/*********************************************************************
* @fn RCC_PLL2Config
*
* @brief Configures the PLL2 multiplication factor.
*
* @param RCC_PLL2Mul - specifies the PLL2 multiplication factor.
* This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20}
* Note-
* - This function must be used only when the PLL2 is disabled.
*
* @return none
*/
void RCC_PLL2Config(uint32_t RCC_PLL2Mul)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR2;
tmpreg &= ~CFGR2_PLL2MUL;
tmpreg |= RCC_PLL2Mul;
RCC->CFGR2 = tmpreg;
}
/*********************************************************************
* @fn RCC_PLL2Cmd
*
* @brief Enables or disables the PLL2.
*
* @param NewState - new state of the PLL2. This parameter can be
* ENABLE or DISABLE.
* Note-
* - The PLL2 can not be disabled if it is used indirectly as system clock
* (i.e. it is used as PLL clock entry that is used as System clock).
*
* @return none
*/
void RCC_PLL2Cmd(FunctionalState NewState)
{
if(NewState)
{
RCC->CTLR |= (1 << 26);
}
else
{
RCC->CTLR &= ~(1 << 26);
}
}
/*********************************************************************
* @fn RCC_PLL3Config
*
* @brief Configures the PLL3 multiplication factor.
*
* @param RCC_PLL3Mul - specifies the PLL2 multiplication factor.
* This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20}
* Note-
* - This function must be used only when the PLL3 is disabled.
*
* @return none
*/
void RCC_PLL3Config(uint32_t RCC_PLL3Mul)
{
uint32_t tmpreg = 0;
tmpreg = RCC->CFGR2;
tmpreg &= ~CFGR2_PLL3MUL;
tmpreg |= RCC_PLL3Mul;
RCC->CFGR2 = tmpreg;
}
/*********************************************************************
* @fn RCC_PLL3Cmd
*
* @brief Enables or disables the PLL3.
*
* @param NewState - new state of the PLL2. This parameter can be
* ENABLE or DISABLE.
*
* @return none
*/
void RCC_PLL3Cmd(FunctionalState NewState)
{
if(NewState)
{
RCC->CTLR |= (1 << 28);
}
else
{
RCC->CTLR &= ~(1 << 28);
}
}
/*********************************************************************
* @fn RCC_USBFSCLKConfig
*
* @brief Configures the USB OTG FS clock (USBFSCLK).
*
* @param RCC_USBFSCLKSource - specifies the USB OTG FS clock source.
* RCC_USBFSCLKSource_PLLCLK_Div1 - PLL clock divided by 1
* selected as USB OTG FS clock source
* RCC_USBFSCLKSource_PLLCLK_Div2 - PLL clock divided by 2
* selected as USB OTG FS clock source
* RCC_USBFSCLKSource_PLLCLK_Div3 - PLL clock divided by 3
* selected as USB OTG FS clock source
*
* @return none
*/
void RCC_USBFSCLKConfig(uint32_t RCC_USBFSCLKSource)
{
RCC->CFGR0 &= ~(3 << 22);
RCC->CFGR0 |= RCC_USBFSCLKSource << 22;
}
/*********************************************************************
* @fn RCC_I2S2CLKConfig
*
* @brief Configures the I2S2 clock source(I2S2CLK).
*
* @param RCC_I2S2CLKSource - specifies the I2S2 clock source.
* RCC_I2S2CLKSource_SYSCLK - system clock selected as I2S2 clock entry
* RCC_I2S2CLKSource_PLL3_VCO - PLL3 VCO clock selected as I2S2 clock entry
* Note-
* - This function must be called before enabling I2S2 APB clock.
* @return none
*/
void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource)
{
RCC->CFGR2 &= ~(1 << 17);
RCC->CFGR2 |= RCC_I2S2CLKSource << 17;
}
/*********************************************************************
* @fn RCC_I2S3CLKConfig
*
* @brief Configures the I2S3 clock source(I2S2CLK).
*
* @param RCC_I2S3CLKSource - specifies the I2S3 clock source.
* RCC_I2S3CLKSource_SYSCLK - system clock selected as I2S3 clock entry
* RCC_I2S3CLKSource_PLL3_VCO - PLL3 VCO clock selected as I2S3 clock entry
* Note-
* - This function must be called before enabling I2S3 APB clock.
* @return none
*/
void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource)
{
RCC->CFGR2 &= ~(1 << 18);
RCC->CFGR2 |= RCC_I2S3CLKSource << 18;
}
/*********************************************************************
* @fn RCC_AHBPeriphResetCmd
*
* @brief Forces or releases AHB peripheral reset.
*
* @param RCC_AHBPeriph - specifies the AHB peripheral to reset.
* RCC_AHBPeriph_USBFS
* RCC_AHBPeriph_ETH_MAC
* NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->AHBRSTR |= RCC_AHBPeriph;
}
else
{
RCC->AHBRSTR &= ~RCC_AHBPeriph;
}
}
/*********************************************************************
* @fn RCC_ADCCLKADJcmd
*
* @brief Enable ADC clock duty cycle adjustment.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_ADCCLKADJcmd(FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->CFGR0 |= (1 << 31);
}
else
{
RCC->CFGR0 &= ~(1 << 31);
}
}
/*********************************************************************
* @fn RCC_RNGCLKConfig
*
* @brief Configures the RNG clock source.
*
* @param RCC_RNGCLKSource - specifies the RNG clock source.
* RCC_RNGCLKSource_SYSCLK - system clock selected as RNG clock entry
* RCC_RNGCLKSource_PLL3_VCO - PLL3 VCO clock selected as RNG clock entry
*
* @return none
*/
void RCC_RNGCLKConfig(uint32_t RCC_RNGCLKSource)
{
RCC->CFGR2 &= ~(1 << 19);
RCC->CFGR2 |= RCC_RNGCLKSource << 19;
}
/*********************************************************************
* @fn RCC_ETH1GCLKConfig
*
* @brief Configures the ETH1G clock source.
*
* @param RCC_RNGCLKSource - specifies the ETH1G clock source.
* RCC_ETH1GCLKSource_PLL2_VCO - system clock selected as ETH1G clock entry
* RCC_ETH1GCLKSource_PLL3_VCO - PLL3 VCO clock selected as ETH1G clock entry
* RCC_ETH1GCLKSource_PB1_IN - GPIO PB1 input clock selected as ETH1G clock entry
*
* @return none
*/
void RCC_ETH1GCLKConfig(uint32_t RCC_ETH1GCLKSource)
{
RCC->CFGR2 &= ~(3 << 20);
RCC->CFGR2 |= RCC_ETH1GCLKSource << 20;
}
/*********************************************************************
* @fn RCC_ETH1G_125Mcmd
*
* @brief Enable ETH1G 125M.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_ETH1G_125Mcmd(FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->CFGR2 |= (1 << 22);
}
else
{
RCC->CFGR2 &= ~(1 << 22);
}
}
/*********************************************************************
* @fn RCC_USBHSConfig
*
* @brief Configures the USBHS clock.
*
* @param RCC_USBHS - defines the USBHS clock divider.
* RCC_USBPLL_Div1 - USBHS clock = USBPLL.
* RCC_USBPLL_Div2 - USBHS clock = USBPLL/2.
* RCC_USBPLL_Div3 - USBHS clock = USBPLL/3.
* RCC_USBPLL_Div4 - USBHS clock = USBPLL/4.
* RCC_USBPLL_Div5 - USBHS clock = USBPLL/5.
* RCC_USBPLL_Div6 - USBHS clock = USBPLL/6.
* RCC_USBPLL_Div7 - USBHS clock = USBPLL/7.
* RCC_USBPLL_Div8 - USBHS clock = USBPLL/8.
*
* @return none
*/
void RCC_USBHSConfig(uint32_t RCC_USBHS)
{
RCC->CFGR2 &= ~(7 << 24);
RCC->CFGR2 |= RCC_USBHS << 24;
}
/*********************************************************************
* @fn RCC_USBHSPLLCLKConfig
*
* @brief Configures the USBHSPLL clock source.
*
* @param RCC_HSBHSPLLCLKSource - specifies the USBHSPLL clock source.
* RCC_HSBHSPLLCLKSource_HSE - HSE clock selected as USBHSPLL clock entry
* RCC_HSBHSPLLCLKSource_HSI - HSI clock selected as USBHSPLL clock entry
*
* @return none
*/
void RCC_USBHSPLLCLKConfig(uint32_t RCC_USBHSPLLCLKSource)
{
RCC->CFGR2 &= ~(1 << 27);
RCC->CFGR2 |= RCC_USBHSPLLCLKSource << 27;
}
/*********************************************************************
* @fn RCC_USBHSPLLCKREFCLKConfig
*
* @brief Configures the USBHSPLL reference clock.
*
* @param RCC_USBHSPLLCKREFCLKSource - Select reference clock.
* RCC_USBHSPLLCKREFCLK_3M - reference clock 3Mhz.
* RCC_USBHSPLLCKREFCLK_4M - reference clock 4Mhz.
* RCC_USBHSPLLCKREFCLK_8M - reference clock 8Mhz.
* RCC_USBHSPLLCKREFCLK_5M - reference clock 5Mhz.
*
* @return none
*/
void RCC_USBHSPLLCKREFCLKConfig(uint32_t RCC_USBHSPLLCKREFCLKSource)
{
RCC->CFGR2 &= ~(3 << 28);
RCC->CFGR2 |= RCC_USBHSPLLCKREFCLKSource << 28;
}
/*********************************************************************
* @fn RCC_USBHSPHYPLLALIVEcmd
*
* @brief Enable USBHS PHY control.
*
* @param NewState - ENABLE or DISABLE.
*
* @return none
*/
void RCC_USBHSPHYPLLALIVEcmd(FunctionalState NewState)
{
if(NewState != DISABLE)
{
RCC->CFGR2 |= (1 << 30);
}
else
{
RCC->CFGR2 &= ~(1 << 30);
}
}
/*********************************************************************
* @fn RCC_USBCLK48MConfig
*
* @brief Configures the USB clock 48MHz source.
*
* @param RCC_USBCLK48MSource - specifies the USB clock 48MHz source.
* RCC_USBCLK48MCLKSource_PLLCLK - PLLCLK clock selected as USB clock 48MHz clock entry
* RCC_USBCLK48MCLKSource_USBPHY - USBPHY clock selected as USB clock 48MHz clock entry
*
* @return none
*/
void RCC_USBCLK48MConfig(uint32_t RCC_USBCLK48MSource)
{
RCC->CFGR2 &= ~(1 << 31);
RCC->CFGR2 |= RCC_USBCLK48MSource << 31;
}