pengsx
/
gateway
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
gateway/User/system_ch32v30x.c

1037 lines
29 KiB
C
Raw Permalink Normal View History

no message
2024-07-13 02:22:47 +00:00
/********************************** (C) COPYRIGHT *******************************
* File Name : system_ch32v30x.c
* Author : WCH
* Version : V1.0.0
* Date : 2024/03/06
* Description : CH32V30x Device Peripheral Access Layer System Source File.
* For HSE = 8Mhz
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#include "ch32v30x.h"
/*
* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after
* reset the HSI is used as SYSCLK source).
* If none of the define below is enabled, the HSI is used as System clock source.
*/
//#define SYSCLK_FREQ_HSE HSE_VALUE
//#define SYSCLK_FREQ_48MHz_HSE 48000000
//#define SYSCLK_FREQ_56MHz_HSE 56000000
//#define SYSCLK_FREQ_72MHz_HSE 72000000
#define SYSCLK_FREQ_96MHz_HSE 96000000
//#define SYSCLK_FREQ_120MHz_HSE 120000000
//#define SYSCLK_FREQ_144MHz_HSE 144000000
//#define SYSCLK_FREQ_HSI HSI_VALUE
//#define SYSCLK_FREQ_48MHz_HSI 48000000
//#define SYSCLK_FREQ_56MHz_HSI 56000000
//#define SYSCLK_FREQ_72MHz_HSI 72000000
//#define SYSCLK_FREQ_96MHz_HSI 96000000
//#define SYSCLK_FREQ_120MHz_HSI 120000000
//#define SYSCLK_FREQ_144MHz_HSI 144000000
/* Clock Definitions */
#ifdef SYSCLK_FREQ_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_96MHz_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_120MHz_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_144MHz_HSE
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_48MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_56MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_72MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_96MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_120MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */
#elif defined SYSCLK_FREQ_144MHz_HSI
uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */
#else
uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */
#endif
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
/* system_private_function_proto_types */
static void SetSysClock(void);
#ifdef SYSCLK_FREQ_HSE
static void SetSysClockToHSE( void );
#elif defined SYSCLK_FREQ_48MHz_HSE
static void SetSysClockTo48_HSE( void );
#elif defined SYSCLK_FREQ_56MHz_HSE
static void SetSysClockTo56_HSE( void );
#elif defined SYSCLK_FREQ_72MHz_HSE
static void SetSysClockTo72_HSE( void );
#elif defined SYSCLK_FREQ_96MHz_HSE
static void SetSysClockTo96_HSE( void );
#elif defined SYSCLK_FREQ_120MHz_HSE
static void SetSysClockTo120_HSE( void );
#elif defined SYSCLK_FREQ_144MHz_HSE
static void SetSysClockTo144_HSE( void );
#elif defined SYSCLK_FREQ_48MHz_HSI
static void SetSysClockTo48_HSI( void );
#elif defined SYSCLK_FREQ_56MHz_HSI
static void SetSysClockTo56_HSI( void );
#elif defined SYSCLK_FREQ_72MHz_HSI
static void SetSysClockTo72_HSI( void );
#elif defined SYSCLK_FREQ_96MHz_HSI
static void SetSysClockTo96_HSI( void );
#elif defined SYSCLK_FREQ_120MHz_HSI
static void SetSysClockTo120_HSI( void );
#elif defined SYSCLK_FREQ_144MHz_HSI
static void SetSysClockTo144_HSI( void );
#endif
/*********************************************************************
* @fn SystemInit
*
* @brief Setup the microcontroller system Initialize the Embedded Flash Interface,
* the PLL and update the SystemCoreClock variable.
*
* @return none
*/
void SystemInit (void)
{
RCC->CTLR |= (uint32_t)0x00000001;
RCC->CFGR0 &= (uint32_t)0xF0FF0000;
RCC->CTLR &= (uint32_t)0xFEF6FFFF;
RCC->CTLR &= (uint32_t)0xFFFBFFFF;
RCC->CFGR0 &= (uint32_t)0xFF00FFFF;
#ifdef CH32V30x_D8C
RCC->CTLR &= (uint32_t)0xEBFFFFFF;
RCC->INTR = 0x00FF0000;
RCC->CFGR2 = 0x00000000;
#else
RCC->INTR = 0x009F0000;
#endif
SetSysClock();
}
/*********************************************************************
* @fn SystemCoreClockUpdate
*
* @brief Update SystemCoreClock variable according to Clock Register Values.
*
* @return none
*/
void SystemCoreClockUpdate (void)
{
uint32_t tmp = 0, pllmull = 0, pllsource = 0;
uint8_t Pll_6_5 = 0;
#ifdef CH32V30x_D8C
uint8_t Pll2mull = 0;
#endif
tmp = RCC->CFGR0 & RCC_SWS;
switch (tmp)
{
case 0x00:
SystemCoreClock = HSI_VALUE;
break;
case 0x04:
SystemCoreClock = HSE_VALUE;
break;
case 0x08:
pllmull = RCC->CFGR0 & RCC_PLLMULL;
pllsource = RCC->CFGR0 & RCC_PLLSRC;
pllmull = ( pllmull >> 18) + 2;
#ifdef CH32V30x_D8
if(pllmull == 17) pllmull = 18;
#else
if(pllmull == 2) pllmull = 18;
if(pllmull == 15){
pllmull = 13; /* *6.5 */
Pll_6_5 = 1;
}
if(pllmull == 16) pllmull = 15;
if(pllmull == 17) pllmull = 16;
#endif
if (pllsource == 0x00)
{
if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE) SystemCoreClock = HSI_VALUE * pllmull;
else SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
}
else
{
#ifdef CH32V30x_D8
if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET)
{
SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
}
else
{
SystemCoreClock = HSE_VALUE * pllmull;
}
#else
if(RCC->CFGR2 & (1<<16)){ /* PLL2 */
SystemCoreClock = HSE_VALUE/(((RCC->CFGR2 & 0xF0)>>4) + 1); /* PREDIV2 */
Pll2mull = (uint8_t)((RCC->CFGR2 & 0xF00)>>8);
if(Pll2mull == 0) SystemCoreClock = (SystemCoreClock * 5)>>1;
else if(Pll2mull == 1) SystemCoreClock = (SystemCoreClock * 25)>>1;
else if(Pll2mull == 15) SystemCoreClock = SystemCoreClock * 20;
else SystemCoreClock = SystemCoreClock * (Pll2mull + 2);
SystemCoreClock = SystemCoreClock/((RCC->CFGR2 & 0xF) + 1); /* PREDIV1 */
}
else{/* HSE */
SystemCoreClock = HSE_VALUE/((RCC->CFGR2 & 0xF) + 1); /* PREDIV1 */
}
SystemCoreClock = SystemCoreClock * pllmull;
#endif
}
if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2);
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)];
SystemCoreClock >>= tmp;
}
/*********************************************************************
* @fn SetSysClock
*
* @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClock(void)
{
//GPIO_IPD_Unused();
#ifdef SYSCLK_FREQ_HSE
SetSysClockToHSE();
#elif defined SYSCLK_FREQ_48MHz_HSE
SetSysClockTo48_HSE();
#elif defined SYSCLK_FREQ_56MHz_HSE
SetSysClockTo56_HSE();
#elif defined SYSCLK_FREQ_72MHz_HSE
SetSysClockTo72_HSE();
#elif defined SYSCLK_FREQ_96MHz_HSE
SetSysClockTo96_HSE();
#elif defined SYSCLK_FREQ_120MHz_HSE
SetSysClockTo120_HSE();
#elif defined SYSCLK_FREQ_144MHz_HSE
SetSysClockTo144_HSE();
#elif defined SYSCLK_FREQ_48MHz_HSI
SetSysClockTo48_HSI();
#elif defined SYSCLK_FREQ_56MHz_HSI
SetSysClockTo56_HSI();
#elif defined SYSCLK_FREQ_72MHz_HSI
SetSysClockTo72_HSI();
#elif defined SYSCLK_FREQ_96MHz_HSI
SetSysClockTo96_HSI();
#elif defined SYSCLK_FREQ_120MHz_HSI
SetSysClockTo120_HSI();
#elif defined SYSCLK_FREQ_144MHz_HSI
SetSysClockTo144_HSI();
#endif
/* If none of the define above is enabled, the HSI is used as System clock
* source (default after reset)
*/
}
#ifdef SYSCLK_FREQ_HSE
/*********************************************************************
* @fn SetSysClockToHSE
*
* @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockToHSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1;
/* Select HSE as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_HSE;
/* Wait till HSE is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04)
{
}
}
else
{
/* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_48MHz_HSE
/*********************************************************************
* @fn SetSysClockTo48_HSE
*
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo48_HSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
else
{
/*
* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_56MHz_HSE
/*********************************************************************
* @fn SetSysClockTo56_HSE
*
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo56_HSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
else
{
/*
* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_72MHz_HSE
/*********************************************************************
* @fn SetSysClockTo72_HSE
*
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo72_HSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
else
{
/*
* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_96MHz_HSE
/*********************************************************************
* @fn SetSysClockTo96_HSE
*
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo96_HSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSE * 12 = 96 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
else
{
/*
* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_120MHz_HSE
/*********************************************************************
* @fn SetSysClockTo120_HSE
*
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo120_HSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSE * 15 = 120 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
else
{
/*
* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_144MHz_HSE
/*********************************************************************
* @fn SetSysClockTo144_HSE
*
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo144_HSE(void)
{
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
RCC->CTLR |= ((uint32_t)RCC_HSEON);
/* Wait till HSE is ready and if Time out is reached exit */
do
{
HSEStatus = RCC->CTLR & RCC_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CTLR & RCC_HSERDY) != RESET)
{
HSEStatus = (uint32_t)0x01;
}
else
{
HSEStatus = (uint32_t)0x00;
}
if (HSEStatus == (uint32_t)0x01)
{
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSE * 18 = 144 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE |
RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
else
{
/*
* If HSE fails to start-up, the application will have wrong clock
* configuration. User can add here some code to deal with this error
*/
}
}
#elif defined SYSCLK_FREQ_48MHz_HSI
/*********************************************************************
* @fn SetSysClockTo48_HSI
*
* @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo48_HSI(void)
{
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
#elif defined SYSCLK_FREQ_56MHz_HSI
/*********************************************************************
* @fn SetSysClockTo56_HSI
*
* @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo56_HSI(void)
{
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSI * 7 = 56 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
#elif defined SYSCLK_FREQ_72MHz_HSI
/*********************************************************************
* @fn SetSysClockTo72_HSI
*
* @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo72_HSI(void)
{
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
#elif defined SYSCLK_FREQ_96MHz_HSI
/*********************************************************************
* @fn SetSysClockTo96_HSI
*
* @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo96_HSI(void)
{
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
#elif defined SYSCLK_FREQ_120MHz_HSI
/*********************************************************************
* @fn SetSysClockTo120_HSI
*
* @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo120_HSI(void)
{
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
#elif defined SYSCLK_FREQ_144MHz_HSI
/*********************************************************************
* @fn SetSysClockTo144_HSI
*
* @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers.
*
* @return none
*/
static void SetSysClockTo144_HSI(void)
{
EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE;
/* HCLK = SYSCLK */
RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1;
/* PCLK2 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1;
/* PCLK1 = HCLK */
RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2;
/* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL));
#ifdef CH32V30x_D8
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18);
#else
RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18_EXTEN);
#endif
/* Enable PLL */
RCC->CTLR |= RCC_PLLON;
/* Wait till PLL is ready */
while((RCC->CTLR & RCC_PLLRDY) == 0)
{
}
/* Select PLL as system clock source */
RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW));
RCC->CFGR0 |= (uint32_t)RCC_SW_PLL;
/* Wait till PLL is used as system clock source */
while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08)
{
}
}
#endif