0715

.template

@@ -7,7 +7,7 @@ Toolchain=RISC-V
 Series=CH32V30X
 Description=
 PeripheralVersion=1.4
-Target Path=obj\CH32V303.hex
+Target Path=obj\CH32V303_V0.1.hex
 CLKSpeed=1
 RTOS=RT-Thread
 

Software/inc/communication_protocol.h

@@ -19,10 +19,150 @@ typedef enum
    SL_Function_Code_Registration_request    =   0xA1,  /* ×¢²áÇëÇó */
 }SL_MsgFunctionCode;
 
+/* 寄存器地址 */
+typedef enum
+{
+   SL_Register_Registration_Status                      = 0x0000,   /* 注册状态  */
+   SL_Register_address                                  = 0x0001,   /* 地址  */
+   SL_Register_Access_Node_Type                         = 0x0002,   /* 接入节点类型   */
+   SL_Register_Communication_Methods                    = 0x0003,   /* 通信方式   */
 
+   SL_Register_Battery_Voltage                          = 0x0100,   /* 电池电压   */
+   SL_Register_Battery_temperature                      = 0x0101,   /* 电池温度   */
+   SL_Register_Remaining_Battery_Bower                  = 0x0102,   /* 电池剩余电量   */
+   SL_Register_Solar_Open_Circuit_Voltage1              = 0x0103,   /* 太阳能开路电压1 */
+   SL_Register_Solar_Open_Circuit_Voltage2              = 0x0104,   /* 太阳能开路电压2 */
 
+   SL_Register_Ambient_Temperature                      = 0x0200,   /* 环境温度 */
+   SL_Register_Ambient_Humidity                         = 0x0201,   /* 环境湿度 */
+   SL_Register_Barometric_Pressure                      = 0x0202,   /* 大气压 */
+   SL_Register_Wind_Speed                               = 0x0203,   /* 风速 */
+   SL_Register_Wind_Direction                           = 0x0204,   /* 风向 */
+   SL_Register_Rainfall                                 = 0x0205,   /* 雨量 */
+   SL_Register_Optical_Radiation                        = 0x0206,   /* 光辐射 */
 
+   SL_Register_Leakage_Current_Value                    = 0x0220,   /* 泄漏电流值 */
+   SL_Register_Leakage_Current_MaxValue                 = 0x0221,   /* 最大泄漏电流值 */
+   SL_Register_Pulse_Frequency                          = 0x0222,   /* 脉冲次数 */
+   SL_Register_Zero_Leakage_Current_MaxValue_Statistics = 0x0223,   /* 清零最大泄漏电流值统计 */
+   SL_Register_Zero_Pulse_Frequency_Statistics          = 0x0224,   /* 清零脉冲次数统计 */
 
+   SL_Register_Inclination_AngleX                       = 0x0230,   /* X轴倾角 */
+   SL_Register_Inclination_AngleY                       = 0x0231,   /* Y轴倾角 */
+   SL_Register_Zero_Inclination_Angle                   = 0x0232,   /* 校零倾角 */
+}SL_MsgRegister;
+
+/* 注册状态 */
+typedef enum
+{
+   UNREGISTER = 0,          /* 未注册 */
+   REGISTER_FAIL = 1,       /* 注册失败 */
+   REGISTER_SUCCESS = 2,    /* 注册成功 */
+}SL_REGISTERSTATUS;
+
+/* 接入节点类型 */
+typedef enum
+{
+   POWERBOX = 1,            /* 电源箱子 */
+   MICROMETEOROLOGY = 2,    /* 微气象 */
+}SL_ACCESSNODETYPE;
+
+/* 通信方式 */
+typedef enum
+{
+    RS485 = 1,
+    RJ45 = 2,
+}SL_COMMUNICATIONMETHODS;
+
+/* 指定对齐方式为1字节 */
+#pragma pack(push,1)
+
+/* 读时发送的帧格式（汇聚网关->接入节点） */
+typedef struct _SL_Mppt_Rorecv_pack{
+    uint8_t start_Flag[2];                  /* 起始标志  */
+    uint8_t address[7];                     /* 地址 */
+    uint8_t function_Code;                  /* 功能码 */
+    uint8_t read_Register_Start_Address_H;  /* 读取寄存器起始地址高8位 */
+    uint8_t read_Register_Start_Address_L;  /* 读取寄存器起始地址低八位 */
+    uint8_t read_Register_Number_H;         /* 读取寄存器个数高八位 */
+    uint8_t read_Register_Number_L;         /* 读取寄存器个数低八位 */
+    uint8_t check_Bit_H;                    /* 校验位高八位 */
+    uint8_t check_Bit_L;                    /* 校验位低八位 */
+    uint8_t end_Flag;                       /* 结束标志 */
+}SL_Mppt_Rorecv_pack;
+#define SL_MPPT_RORECV_PACK_SIZE        (sizeof(SL_Mppt_Rorecv_pack))
+
+/* 读时接收到的回复帧格式（接入节点->汇聚网关） */
+typedef struct _SL_Mppt_ROReply_pack{
+    uint8_t start_Flag[2];                  /* 起始标志  */
+    uint8_t address[7];                     /* 地址 */
+    uint8_t function_Code;                  /* 功能码 */
+    uint8_t write_Register_Number_H;        /* 回复字节数长度高八位  */
+    uint8_t write_Register_Number_L;        /* 回复字节数长度低八位  */
+    uint8_t *content;                       /* 回复数据内容 */
+    uint8_t check_Bit_H;                    /* 校验位高八位 */
+    uint8_t check_Bit_L;                    /* 校验位低八位 */
+    uint8_t end_Flag;                       /* 结束标志 */
+}SL_Mppt_ROReply_pack;
+#define SL_MPPT_ROReply_PACK_SIZE        (sizeof(SL_Mppt_ROReply_pack))
+
+/* 扫描广播帧F1（汇聚网关->接入节点） */
+typedef struct _SL_Mppt_ScanBroadcast_pack{
+    uint8_t start_Flag[2];                  /* 起始标志  */
+    uint8_t address[7];                     /* 地址 */
+    uint8_t function_Code;                  /* 功能码 */
+    uint8_t check_Bit_H;                    /* 校验位高八位 */
+    uint8_t check_Bit_L;                    /* 校验位低八位 */
+    uint8_t end_Flag;                       /* 结束标志 */
+}SL_Mppt_Scan_Broadcast_pack;
+#define SL_MPPT_SCAN_BROADCAST_PACK_SIZE    (sizeof(SL_Mppt_Scan_Broadcast_pack))
+
+/* 注册请求帧F2（接入节点->汇聚网关） */
+typedef struct _SL_Mppt_RegistrationRequest_pack{
+    uint8_t start_Flag[2];              /* 起始标志  */
+    uint8_t address[7];                 /* 地址 */
+    uint8_t function_Code;              /* 功能码 */
+    uint8_t register_Length_H;          /* 寄存器长度高八位 */
+    uint8_t register_Length_L;          /* 寄存器长度低八位 */
+    uint8_t registration_Status_H;      /* 注册状态高八位  */
+    uint8_t registration_Status_L;      /* 注册状态低八位 */
+    uint8_t access_Node_ID[7];          /* 接入节点ID */
+    uint8_t access_Node_Type_H;         /* 接入节点类型高八位 */
+    uint8_t access_Node_Type_L;         /* 接入节点类型低八位 */
+    uint8_t check_Bit_H;                /* 校验位高八位 */
+    uint8_t check_Bit_L;                /* 校验位低八位 */
+    uint8_t end_Flag;                   /* 结束标志 */
+}SL_Mppt_RegistrationRequest_pack;
+#define SL_MPPT_REGISTRATIONREQUEST_PACK_SIZE    (sizeof(SL_Mppt_RegistrationRequest_pack))
+
+/* 注册回复帧F3（汇聚网关->接入节点） */
+typedef struct _SL_Mppt_RegistrationReply_pack{
+    uint8_t start_Flag[2];              /* 起始标志  */
+    uint8_t address[7];                 /* 地址 */
+    uint8_t function_Code;              /* 功能码 */
+    uint8_t register_Length_H;          /* 寄存器长度高八位 */
+    uint8_t register_Length_L;          /* 寄存器长度低八位 */
+    uint8_t registration_Status_H;      /* 注册状态高八位  */
+    uint8_t registration_Status_L;      /* 注册状态低八位 */
+    uint8_t check_Bit_H;                /* 校验位高八位 */
+    uint8_t check_Bit_L;                /* 校验位低八位 */
+    uint8_t end_Flag;                   /* 结束标志 */
+}SL_Mppt_RegistrationReply_pack;
+#define SL_MPPT_REGISTRATIONREPLY_PACK_SIZE (sizeof(SL_Mppt_RegistrationReply_pack))
+
+/*  */
+#define RECV_LENGTH 20
+typedef struct _SL_Mppt_Recv_pack{
+    uint8_t  start_Flag[2];                 /* 起始标志  */
+    uint8_t  address[7];                    /* 地址 */
+    uint8_t  function_Code;                 /* 功能码 */
+    uint8_t  recv_Data[RECV_LENGTH];        /* 其他部分 */
+}SL_Mppt_Recv_pack;
+
+/* 恢复默认的对齐设置 */
+#pragma pack(pop)
+
+extern SL_Mppt_Scan_Broadcast_pack g_Scan_Broadcast_pack;
 
 
 

Software/inc/inflash.h

@@ -0,0 +1,35 @@
+/*
+ * inflash.h
+ *
+ *  Created on: 2024年6月24日
+ *      Author: psx
+ */
+
+#ifndef APP_INC_INFLASH_H_
+#define APP_INC_INFLASH_H_
+
+#include "debug.h"
+
+#pragma pack(push,1)
+typedef struct _config_info{
+    uint8_t  start_Flag[2];         /* 起始标志  */
+    uint8_t  address[7];            /* 地址 */
+    uint8_t  end_Flag;              /* 结束标志 */
+    uint16_t Access_Node_Type;      /* 接入节点类型  */
+    uint16_t Communication_Methods; /* 通信方式  */
+    uint32_t bat485_Baud;           /* 串口波特率 */
+    uint32_t gw485_Baud;            /* 串口波特率 */
+}config_info;
+#define CONFIG_INFO_SIZE    (sizeof(config_info))
+#pragma pack(pop)
+
+extern config_info g_slConfigInfo;
+
+#define FLASH_SAVE_ADDR_BEGIN   (0x00)
+#define FLASH_SAVE_ADDR_END     (0x00 + CONFIG_INFO_SIZE)
+
+void save_config_info(config_info save_config_info);
+uint8_t read_config_info(void);
+
+
+#endif /* APP_INC_INFLASH_H_ */

Software/inc/thread.h

@@ -11,7 +11,7 @@
 #include "communication_protocol.h"
 
 
-void Rs485_thread_Init(void);
+void UartRecv_thread_Init(void);
 
 
 #endif /* SOFTWARE_THREAD_RS485_H_ */

Software/inc/uart_dev.h

@@ -12,7 +12,6 @@
 #include <rtthread.h>
 #include <rthw.h>
 #include "RingQueue/ring_queue.h"
-#include "rs485.h"
 
 #define  ASCII_CHAR_BACKSPACE                           0x08    /* '\b' */
 #define  ASCII_CHAR_CHARACTER_TABULATION                0x09    /* '\t' */
@@ -31,14 +30,14 @@ extern device_handle g_J4RS485_UART8_handle;
 extern device_handle g_J50RS485_USART3_handle;
 extern device_handle g_LORA_UART5_handle;
 
-typedef enum{
+//typedef enum{
-   J1RS485_UART6 = 6,
+//   J1RS485_UART6 = UART6,
-   J2RS485_UART7 = 7,
+//   J2RS485_UART7 = 7,
-   J3RS485_USART2 = 2,
+//   J3RS485_USART2 = 2,
-   J4RS485_UART8 = 8,
+//   J4RS485_UART8 = 8,
-   J50RS485_USART3 = 3,
+//   J50RS485_USART3 = 3,
-   LORA_UART5 = 5,
+//   LORA_UART5 = 5,
-}uartIndex_e;
+//}uartIndex_e;
 
 typedef enum{
     ONLYONE = 1,
@@ -53,7 +52,7 @@ typedef enum{
 /* UART 驱动数据结构，对应一个uart设备 */
 typedef struct _uart_device_info{
   uint8_t       init;
-  uartIndex_e   uart_index;
+  USART_TypeDef *uart_index;
   uint32_t      uart_baudrate;
   RingQueue     uart_ring_queue;
   uartNum_e     uart_num;

Software/src/Rs485.c

@@ -1,46 +0,0 @@
-/*
- * Rs485.c
- *
- *  Created on: 2024年5月18日
- *      Author: 34509
- */
-#include "Rs485.h"
-
-/* 定义线程控制块指针 */
-static rt_thread_t Rs485_thread = RT_NULL;
-
-/* 函数声明 */
-static void Rs485_thread_entry(void* parameter);
-
-
-
-void Rs485_thread_Init(void)
-{
-    Rs485_thread = /* 线程控制块指针 */
-    rt_thread_create( "led", /* 线程名字 */
-            Rs485_thread_entry, /* 线程入口函数 */
-            RT_NULL, /* 线程入口函数参数 */
-            512, /* 线程栈大小 */
-            10, /* 线程的优先级 */
-            20); /* 线程时间片 */
-
-    /* 启动线程，开启调度 */
-    if (Rs485_thread != RT_NULL)
-        rt_thread_startup(Rs485_thread);
-    else
-        return;
-
-}
-
-
-
-
-void Rs485_thread_entry(void* parameter)
-{
-
-    while (1) {
-        rt_thread_mdelay(3000);
-
-    }
-
-}

Software/src/communication_protocol.c

@@ -6,7 +6,124 @@
  */
 
 #include <communication_protocol.h>
+#include "uart_dev.h"
+#include "inflash.h"
+
+SL_Mppt_Scan_Broadcast_pack g_Scan_Broadcast_pack = {
+        .start_Flag = "SL",
+        .address = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
+        .function_Code = SL_Function_Code_Broadcast_Scan,
+        .check_Bit_H = 0x36,
+        .check_Bit_L = 0xE6,
+        .end_Flag = 0x16,
+};
+
+/* 读取串口数据时用该数组解析 */
+static uint8_t uart_buff[50]={0x00};
 
 
+/**
+  * @brief  校验算法
+  * @param
+  * @retval
+  */
+uint16_t CheckFunc(uint8_t *arr_buff, uint8_t len)
+{
+    uint16_t crc = 0xFFFF;
+    uint16_t i, j;
+    for (j = 0; j < len; ++j) {
+        crc = crc ^ (*arr_buff++);
+        for (i = 0; i < 8; ++i) {
+            if ((crc&0x0001) > 0) {
+                crc = crc >> 1;
+                crc = crc ^ 0xa001;
+            }
+            else {
+                crc = crc >> 1;
+            }
+        }
+    }
+    return crc;
+}
+
+/**
+  * @brief  检测485总线是否繁忙
+  * @param
+  * @retval 1 繁忙
+  *         0 空闲
+  */
+uint8_t Check_485_bus_busy(device_handle device)
+{
+    uart_device_info *device_info = (uart_device_info *)device;
+    if((!device) || (!device_info->init))
+       return 0;
+
+    USART_ITConfig(device_info->uart_index, USART_IT_RXNE, ENABLE);
+
+    uint16_t num_ago = ring_queue_length(device);
+    Delay_Ms(2);
+    uint16_t num_now = ring_queue_length(device);
+
+    USART_ITConfig(device_info->uart_index, USART_IT_RXNE, DISABLE);
+
+    if (num_now == num_ago) {
+        return 0;
+    }
+    return 1;
+}
+
+/**
+  * @brief  匹配起始标志"SL"
+  * @param  start_buff  起始标志
+  * @retval 1 匹配成功
+  *         0 匹配失败
+  */
+static int Match_Startflag(uint8_t start_buff[2])
+{
+    if ((start_buff[0] == g_slConfigInfo.start_Flag[0]) && \
+            (start_buff[1] == g_slConfigInfo.start_Flag[1])) {
+        return 1;
+    }
+    return 0;
+}
+
+/**
+  * @brief  读取串口数据
+  * @param  uart_handle 串口句柄
+  * @param  buff        缓冲区
+  * @param  buff_size   缓冲区长度
+  * @retval
+  */
+static int uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, uint32_t buff_size)
+{
 
 
+}
+
+/**
+  * @brief  处理一条消息
+  * @param
+  * @retval
+  */
+void FRT_MsgHandler(device_handle device, uint8_t *pMsg, uint32_t MsgLen)
+{
+    SL_Mppt_Recv_pack *pack = (SL_Mppt_Recv_pack *)pMsg;
+
+}
+
+/**
+  * @brief  读取并解析串口数据
+  * @param
+  * @retval
+  */
+void read_and_process_uart_data(device_handle device)
+{
+//    printf("ring_queue_length = %d \n", ring_queue_length(device));
+    if (ring_queue_length(device) > 10) {
+        memset(uart_buff, 0, sizeof(uart_buff));
+        int ret = uart_read_climate_pack(device, uart_buff, sizeof(uart_buff));
+        if(ret > 0){
+            FRT_MsgHandler(device, uart_buff, ret);
+        }
+    }
+}

Software/src/inflash.c

@@ -0,0 +1,48 @@
+/*
+ * inflash.c
+ *
+ *  Created on: 2024年6月24日
+ *      Author: psx
+ */
+
+#include "inflash.h"
+#include "flash.h"
+
+config_info g_slConfigInfo = {
+    .start_Flag = {'S', 'L'},
+    .end_Flag = 0x16,
+};
+
+
+/**
+ * @brief   保存配置信息
+ * @param   save_config_info 需要保存的配置信息
+ * @retval
+ */
+void save_config_info(config_info save_config_info)
+{
+    SPI_Flash_Write((uint8_t *)&save_config_info, FLASH_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE);
+}
+
+
+/**
+ * @brief   读取配置信息
+ * @param   read_config_info 读取的配置信息
+ * @retval  0   flash中读取配置失败
+ *          1   flash中读取配置成功
+ */
+uint8_t read_config_info(void)
+{
+    config_info temp_config_info;
+    SPI_Flash_Read((uint8_t *)&temp_config_info, FLASH_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE);
+    if (temp_config_info.start_Flag[0] == 'S') {
+        g_slConfigInfo = temp_config_info;
+        return 1;
+    }
+    return 0;
+}
+
+
+
+
+

Software/src/thread.c

@@ -0,0 +1,48 @@
+/*
+ * Rs485.c
+ *
+ *  Created on: 2024年5月18日
+ *      Author: 34509
+ */
+#include <thread.h>
+#include "uart_dev.h"
+
+/* 定义线程控制块指针 */
+static rt_thread_t UartRecv_thread = RT_NULL;
+
+/* 函数声明 */
+static void UartRecv_thread_entry(void* parameter);
+
+
+
+void UartRecv_thread_Init(void)
+{
+    UartRecv_thread = /* 线程控制块指针 */
+    rt_thread_create( "UartRecv", /* 线程名字 */
+            UartRecv_thread_entry, /* 线程入口函数 */
+            RT_NULL, /* 线程入口函数参数 */
+            512, /* 线程栈大小 */
+            3, /* 线程的优先级 */
+            20); /* 线程时间片 */
+
+    /* 启动线程，开启调度 */
+    if (UartRecv_thread != RT_NULL)
+        rt_thread_startup(UartRecv_thread);
+    else
+        return;
+
+}
+
+
+
+
+void UartRecv_thread_entry(void* parameter)
+{
+    while (1) {
+        if (ring_queue_length(g_J50RS485_USART3_handle) > 1) {
+            rt_thread_mdelay(30);
+
+        }
+        rt_thread_mdelay(100);
+    }
+}

Software/src/uart_dev.c

@@ -52,32 +52,32 @@ uint8_t LORA_in_buff[IN_BUFF_SIZE];
 uart_device_info uart_devices[]={
   [0] = {
       .init          = 0,
-      .uart_index    = J1RS485_UART6,
+      .uart_index    = UART6,
       .uart_num      = ONLYONE,
   },
   [1] = {
       .init          = 0,
-      .uart_index    = J2RS485_UART7,
+      .uart_index    = UART7,
       .uart_num      = ONLYONE,
   },
   [2] = {
       .init          = 0,
-      .uart_index    = J3RS485_USART2,
+      .uart_index    = USART2,
       .uart_num      = ONLYONE,
   },
   [3] = {
       .init          = 0,
-      .uart_index    = J4RS485_UART8,
+      .uart_index    = UART8,
       .uart_num      = ONLYONE,
   },
   [4] = {
       .init          = 0,
-      .uart_index    = J50RS485_USART3,
+      .uart_index    = USART3,
       .uart_num      = J0RS485,
   },
   [5] = {
       .init          = 0,
-      .uart_index    = LORA_UART5,
+      .uart_index    = UART5,
       .uart_num      = ONLYONE,
   },
 };
@@ -167,17 +167,17 @@ device_handle uart_dev_init(void)
   * @retval None
   */
 void uart_init(uart_device_info *uart_device, int baud)
-{        rt_kprintf("1 \n");
+{
     uart_device->uart_baudrate = baud;
-    if (uart_device->uart_index == J1RS485_UART6) {
+    if (uart_device->uart_index == UART6) {
         J1_485_Init(baud);
-    } else if (uart_device->uart_index == J2RS485_UART7) {
+    } else if (uart_device->uart_index == UART7) {
         J2_485_Init(baud);
-    } else if (uart_device->uart_index == J3RS485_USART2) {
+    } else if (uart_device->uart_index == USART2) {
         J3_485_Init(baud);
-    } else if (uart_device->uart_index == J4RS485_UART8) {
+    } else if (uart_device->uart_index == UART8) {
         J4_485_Init(baud);
-    } else if (uart_device->uart_index == J50RS485_USART3) {
+    } else if (uart_device->uart_index == USART3) {
         J5_0_485_Init(baud);
         if (uart_device->uart_num == J0RS485) {
             USART_CONNET_J0();
@@ -192,8 +192,7 @@ void uart_init(uart_device_info *uart_device, int baud)
         } else if (uart_device->uart_num == J9RS485) {
             USART_CONNET_J9();
         }
-        rt_kprintf("1 \n");
+    } else if (uart_device->uart_index == UART5) {
-    } else if (uart_device->uart_index == LORA_UART5) {
         ;
     }
 }
@@ -210,17 +209,8 @@ uint8_t uart_putchar(device_handle device, char ch)
     if((!device) || (!device_info->init))
        return 0;
 
-    if (device_info->uart_index == J1RS485_UART6) {
+    USARTx_SendByte_str(device_info->uart_index, ch);
 
-    } else if (device_info->uart_index == J2RS485_UART7) {
-
-    } else if (device_info->uart_index == J3RS485_USART2) {
-
-    } else if (device_info->uart_index == J4RS485_UART8) {
-
-    } else if (device_info->uart_index == J50RS485_USART3) {
-        USARTx_SendByte_str(USART3, ch);
-    }
 
     return 1;
 }

User/main.c

@@ -34,7 +34,6 @@ int main(void)
     SystemCoreClockUpdate();
 	rt_kprintf(" SysClk: %dHz\r\n",SystemCoreClock);
 	rt_kprintf(" ChipID: %08x\r\n",DBGMCU_GetCHIPID());
-    rt_kprintf("test \r\n");
 
     app_star();
 

User/start.c

@@ -6,7 +6,7 @@
 #include "inc/UART.h"
 
 #include <inc/communication_protocol.h>
-#include "inc/Rs485.h"
+#include <inc/thread.h>
 #include "inc/uart_dev.h"
 
 
@@ -37,11 +37,7 @@ void software_init()
 {
     uart_dev_init();
 
-//    uart_sendstr(g_J50RS485_USART3_handle, "This is a test data.\n");
+    UartRecv_thread_Init();
-    USARTx_SendStr(USART3, "This is a test data.\n");
-    Rs485_thread_Init();
-
-
 }
 
 /*

obj/Software/src/communication_protocol.d

@@ -49,7 +49,10 @@ Software/src/communication_protocol.o: \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/pipe.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/poll.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/serial.h \
- D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h \
+ D:\psx\su806\git\CH32V303_V0.1\Software\inc/uart_dev.h \
+ D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h \
+ D:\psx\su806\git\CH32V303_V0.1\Software\inc/inflash.h
 
 D:\psx\su806\git\CH32V303_V0.1\Software\inc/communication_protocol.h:
 
@@ -150,3 +153,9 @@ D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/poll.h:
 D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/serial.h:
 
 D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Software\inc/uart_dev.h:
+
+D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Software\inc/inflash.h:

obj/Software/src/inflash.d

@@ -0,0 +1,118 @@
+Software/src/inflash.o: ../Software/src/inflash.c \
+ D:\psx\su806\git\CH32V303_V0.1\Software\inc/inflash.h \
+ D:\psx\su806\git\CH32V303_V0.1\Debug/debug.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x.h \
+ D:\psx\su806\git\CH32V303_V0.1\Core/core_riscv.h \
+ D:\psx\su806\git\CH32V303_V0.1\User/system_ch32v30x.h \
+ D:\psx\su806\git\CH32V303_V0.1\User/ch32v30x_conf.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_adc.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_bkp.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_can.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_crc.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_dac.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_dbgmcu.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_dma.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_exti.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_flash.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_fsmc.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_gpio.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_i2c.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_iwdg.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_pwr.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_rcc.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_rtc.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_sdio.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_spi.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_tim.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_usart.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_wwdg.h \
+ D:\psx\su806\git\CH32V303_V0.1\User/ch32v30x_it.h \
+ D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_misc.h \
+ D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/flash.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rthw.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtthread.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread/rtconfig.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtdebug.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtdef.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtservice.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtm.h \
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\components\finsh/finsh_api.h
+
+D:\psx\su806\git\CH32V303_V0.1\Software\inc/inflash.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Debug/debug.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Core/core_riscv.h:
+
+D:\psx\su806\git\CH32V303_V0.1\User/system_ch32v30x.h:
+
+D:\psx\su806\git\CH32V303_V0.1\User/ch32v30x_conf.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_adc.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_bkp.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_can.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_crc.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_dac.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_dbgmcu.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_dma.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_exti.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_flash.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_fsmc.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_gpio.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_i2c.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_iwdg.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_pwr.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_rcc.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_rtc.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_sdio.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_spi.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_tim.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_usart.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_wwdg.h:
+
+D:\psx\su806\git\CH32V303_V0.1\User/ch32v30x_it.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x_misc.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/flash.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rthw.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtthread.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread/rtconfig.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtdebug.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtdef.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtservice.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rtm.h:
+
+D:\psx\su806\git\CH32V303_V0.1\rtthread\components\finsh/finsh_api.h:

obj/Software/src/subdir.mk

@@ -5,21 +5,24 @@
 
 # Add inputs and outputs from these tool invocations to the build variables 
 C_SRCS += \
-../Software/src/Rs485.c \
 ../Software/src/communication_protocol.c \
+../Software/src/inflash.c \
 ../Software/src/mutex.c \
+../Software/src/thread.c \
 ../Software/src/uart_dev.c 
 
 OBJS += \
-./Software/src/Rs485.o \
 ./Software/src/communication_protocol.o \
+./Software/src/inflash.o \
 ./Software/src/mutex.o \
+./Software/src/thread.o \
 ./Software/src/uart_dev.o 
 
 C_DEPS += \
-./Software/src/Rs485.d \
 ./Software/src/communication_protocol.d \
+./Software/src/inflash.d \
 ./Software/src/mutex.d \
+./Software/src/thread.d \
 ./Software/src/uart_dev.d 
 
 

obj/Software/src/thread.d

@@ -1,5 +1,5 @@
-Software/src/Rs485.o: ../Software/src/Rs485.c \
+Software/src/thread.o: ../Software/src/thread.c \
- D:\psx\su806\git\CH32V303_V0.1\Software\inc/Rs485.h \
+ D:\psx\su806\git\CH32V303_V0.1\Software\inc/thread.h \
  D:\psx\su806\git\CH32V303_V0.1\Software\inc/communication_protocol.h \
  D:\psx\su806\git\CH32V303_V0.1\Hardware/inc/UART.h \
  D:\psx\su806\git\CH32V303_V0.1\Peripheral\inc/ch32v30x.h \
@@ -49,9 +49,11 @@ Software/src/Rs485.o: ../Software/src/Rs485.c \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/pipe.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/poll.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/serial.h \
- D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h
+ D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h \
+ D:\psx\su806\git\CH32V303_V0.1\Software\inc/uart_dev.h \
+ D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h
 
-D:\psx\su806\git\CH32V303_V0.1\Software\inc/Rs485.h:
+D:\psx\su806\git\CH32V303_V0.1\Software\inc/thread.h:
 
 D:\psx\su806\git\CH32V303_V0.1\Software\inc/communication_protocol.h:
 
@@ -152,3 +154,7 @@ D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/poll.h:
 D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/serial.h:
 
 D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h:
+
+D:\psx\su806\git\CH32V303_V0.1\Software\inc/uart_dev.h:
+
+D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h:

obj/Software/src/uart_dev.d

@@ -38,9 +38,8 @@ Software/src/uart_dev.o: ../Software/src/uart_dev.c \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\finsh/finsh_api.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rthw.h \
  D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h \
- D:\psx\su806\git\CH32V303_V0.1\Software\inc/rs485.h \
+ D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J1_UART6.h \
- D:\psx\su806\git\CH32V303_V0.1\Software\inc/communication_protocol.h \
+ D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/UART.h \
- D:\psx\su806\git\CH32V303_V0.1\Hardware/inc/UART.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/rtdevice.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/ringbuffer.h \
@@ -52,8 +51,6 @@ Software/src/uart_dev.o: ../Software/src/uart_dev.c \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/ipc/poll.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/serial.h \
  D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h \
- D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J1_UART6.h \
- D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/UART.h \
  D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J2_UART7.h \
  D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J3_USART2.h \
  D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J4_UART8.h \
@@ -137,11 +134,9 @@ D:\psx\su806\git\CH32V303_V0.1\rtthread\include/rthw.h:
 
 D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h:
 
-D:\psx\su806\git\CH32V303_V0.1\Software\inc/rs485.h:
+D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J1_UART6.h:
 
-D:\psx\su806\git\CH32V303_V0.1\Software\inc/communication_protocol.h:
+D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/UART.h:
-
-D:\psx\su806\git\CH32V303_V0.1\Hardware/inc/UART.h:
 
 D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h:
 
@@ -165,10 +160,6 @@ D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/seria
 
 D:\psx\su806\git\CH32V303_V0.1\rtthread\components\drivers\include/drivers/pin.h:
 
-D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J1_UART6.h:
-
-D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/UART.h:
-
 D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J2_UART7.h:
 
 D:\psx\su806\git\CH32V303_V0.1\Hardware\inc/J3_USART2.h:

obj/User/start.d

@@ -51,11 +51,10 @@ User/start.d: ../User/start.c D:\psx\su806\git\CH32V303_V0.1\User/start.h \
  D:\psx\su806\git\CH32V303_V0.1\Hardware/inc/Flash.h \
  D:\psx\su806\git\CH32V303_V0.1\Hardware/inc/UART.h \
  D:\psx\su806\git\CH32V303_V0.1\Software/inc/communication_protocol.h \
- D:\psx\su806\git\CH32V303_V0.1\Software/inc/Rs485.h \
+ D:\psx\su806\git\CH32V303_V0.1\Software/inc/thread.h \
  D:\psx\su806\git\CH32V303_V0.1\Software/inc/communication_protocol.h \
  D:\psx\su806\git\CH32V303_V0.1\Software/inc/uart_dev.h \
- D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h \
+ D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h
- D:\psx\su806\git\CH32V303_V0.1\Software/inc/rs485.h
 
 D:\psx\su806\git\CH32V303_V0.1\User/start.h:
 
@@ -163,12 +162,10 @@ D:\psx\su806\git\CH32V303_V0.1\Hardware/inc/UART.h:
 
 D:\psx\su806\git\CH32V303_V0.1\Software/inc/communication_protocol.h:
 
-D:\psx\su806\git\CH32V303_V0.1\Software/inc/Rs485.h:
+D:\psx\su806\git\CH32V303_V0.1\Software/inc/thread.h:
 
 D:\psx\su806\git\CH32V303_V0.1\Software/inc/communication_protocol.h:
 
 D:\psx\su806\git\CH32V303_V0.1\Software/inc/uart_dev.h:
 
 D:\psx\su806\git\CH32V303_V0.1\drivers/RingQueue/ring_queue.h:
-
-D:\psx\su806\git\CH32V303_V0.1\Software/inc/rs485.h: