275 lines
7.9 KiB
C
275 lines
7.9 KiB
C
|
|
|
|
/*
|
|
* File : drv_usart.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rt-thread.org/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-01-05 Bernard the first version
|
|
* 2010-03-29 Bernard remove interrupt Tx and DMA Rx mode
|
|
* 2013-05-13 aozima update for kehong-lingtai.
|
|
* 2015-01-31 armink make sure the serial transmit complete in putc()
|
|
* 2016-05-13 armink add DMA Rx mode
|
|
* 2017-01-19 aubr.cool add interrupt Tx mode
|
|
* 2017-04-13 aubr.cool correct Rx parity err
|
|
* 2017-10-20 ZYH porting to HAL Libraries(with out DMA)
|
|
* 2017-11-15 ZYH update to 3.0.0
|
|
*/
|
|
|
|
#include "board.h"
|
|
#include <rtdevice.h>
|
|
#include <drv_usart.h>
|
|
|
|
/* uart driver */
|
|
struct ch32_uart
|
|
{
|
|
USART_InitTypeDef huart;
|
|
USART_TypeDef *USARTx;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t ch32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
uart->huart.USART_BaudRate = cfg->baud_rate;
|
|
uart->huart.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
uart->huart.USART_Mode = USART_Mode_Rx|USART_Mode_Tx;
|
|
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_8:
|
|
uart->huart.USART_WordLength = USART_WordLength_8b;
|
|
break;
|
|
case DATA_BITS_9:
|
|
uart->huart.USART_WordLength = USART_WordLength_9b;
|
|
break;
|
|
default:
|
|
uart->huart.USART_WordLength = USART_WordLength_8b;
|
|
break;
|
|
}
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
uart->huart.USART_StopBits = USART_StopBits_1;
|
|
break;
|
|
case STOP_BITS_2:
|
|
uart->huart.USART_StopBits = USART_StopBits_2;
|
|
break;
|
|
default:
|
|
uart->huart.USART_StopBits = USART_StopBits_1;
|
|
break;
|
|
}
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
uart->huart.USART_Parity = USART_Parity_No;
|
|
break;
|
|
case PARITY_ODD:
|
|
uart->huart.USART_Parity = USART_Parity_Odd;
|
|
break;
|
|
case PARITY_EVEN:
|
|
uart->huart.USART_Parity = USART_Parity_Even;
|
|
break;
|
|
default:
|
|
uart->huart.USART_Parity = USART_Parity_No;
|
|
break;
|
|
}
|
|
// if (HAL_UART_Init(&uart->huart) != HAL_OK)
|
|
// {
|
|
// return RT_ERROR;
|
|
// }
|
|
|
|
if(uart->USARTx == USART1)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOA, ENABLE);
|
|
|
|
// uart->irq=USART1_IRQn;
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
USART_Init(uart->USARTx,&uart->huart);
|
|
USART_Cmd(uart->USARTx, ENABLE);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t ch32_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
switch (cmd)
|
|
{
|
|
/* disable interrupt */
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->irq);
|
|
/* disable interrupt */
|
|
USART_ITConfig(uart->USARTx,USART_IT_RXNE,DISABLE);
|
|
break;
|
|
/* enable interrupt */
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->irq);
|
|
/* enable interrupt */
|
|
USART_ITConfig(uart->USARTx, USART_IT_RXNE,ENABLE);
|
|
break;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int ch32_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
// while (__HAL_UART_GET_FLAG(&uart->huart, UART_FLAG_TXE) == RESET);
|
|
while (USART_GetFlagStatus(uart->USARTx, USART_FLAG_TC) == RESET);
|
|
uart->USARTx->DATAR = c;
|
|
return 1;
|
|
}
|
|
|
|
static int ch32_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct ch32_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct ch32_uart *)serial->parent.user_data;
|
|
ch = -1;
|
|
if (USART_GetFlagStatus(uart->USARTx, USART_FLAG_RXNE) != RESET)
|
|
{
|
|
ch = uart->USARTx->DATAR & 0xff;
|
|
}
|
|
return ch;
|
|
}
|
|
|
|
|
|
rt_size_t ch32dma_transmit(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size, int direction)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
|
|
/**
|
|
* Uart common interrupt process. This need add to uart ISR.
|
|
*
|
|
* @param serial serial device
|
|
*/
|
|
static void uart_isr(struct rt_serial_device *serial)
|
|
{
|
|
struct ch32_uart *uart = (struct ch32_uart *) serial->parent.user_data;
|
|
RT_ASSERT(uart != RT_NULL);
|
|
if (USART_GetITStatus(uart->USARTx, USART_IT_RXNE) != RESET)
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
USART_ClearITPendingBit(uart->USARTx, USART_IT_RXNE);
|
|
}
|
|
}
|
|
|
|
static const struct rt_uart_ops ch32_uart_ops =
|
|
{
|
|
ch32_configure,
|
|
ch32_control,
|
|
ch32_putc,
|
|
ch32_getc,
|
|
ch32dma_transmit
|
|
};
|
|
|
|
#if defined(RT_USING_UART1)
|
|
/* UART1 device driver structure */
|
|
struct ch32_uart uart1;
|
|
struct rt_serial_device serial1;
|
|
|
|
|
|
|
|
void USART1_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
|
|
void USART1_IRQHandler(void)
|
|
{
|
|
GET_INT_SP();
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
// printf("int_SP:%08x\n",__get_SP());
|
|
uart_isr(&serial1);
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
|
|
FREE_INT_SP();
|
|
}
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
|
|
|
|
|
|
int rt_hw_usart_init(void)
|
|
{
|
|
struct ch32_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
// ch32_uart_ops.configure = ch32_configure;
|
|
// ch32_uart_ops.control = ch32_control;
|
|
// ch32_uart_ops.putc = ch32_putc;
|
|
// ch32_uart_ops.getc = ch32_getc;
|
|
// ch32_uart_ops.dma_transmit= ch32dma_transmit;
|
|
|
|
#if defined(RT_USING_UART1)
|
|
uart=&uart1;
|
|
uart->irq=USART1_IRQn;
|
|
uart->USARTx=USART1;
|
|
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
serial1.ops = &ch32_uart_ops;
|
|
serial1.config = config;
|
|
|
|
|
|
uart->huart.USART_BaudRate = 115200;
|
|
uart->huart.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|
uart->huart.USART_Mode = USART_Mode_Rx|USART_Mode_Tx;
|
|
uart->huart.USART_WordLength = USART_WordLength_8b;
|
|
uart->huart.USART_StopBits = USART_StopBits_1;
|
|
uart->huart.USART_Parity = USART_Parity_No;
|
|
|
|
if(uart->USARTx == USART1)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOA, ENABLE);
|
|
|
|
// uart->irq=USART1_IRQn;
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
USART_Init(uart->USARTx,&uart->huart);
|
|
USART_Cmd(uart->USARTx, ENABLE);
|
|
}
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_usart_init);
|
|
|