pengsx
/
mppt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

增加配置文件升级

This commit is contained in:
起床就犯困 2024-10-26 09:07:30 +08:00
parent 20d2cfe02f
commit a83d788afb
33 changed files with 15093 additions and 12483 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
App/inc/inflash.h
View File

@ -11,6 +11,9 @@
#include "debug.h" #include "debug.h"
#include "math.h" #include "math.h"
#define softVer "SV01_24101501"
#pragma pack(push,1) #pragma pack(push,1)
/* 高字节在前，低字节在后 */ /* 高字节在前，低字节在后 */
@ -20,8 +23,8 @@ typedef struct _recv_config_info{
uint8_t address[7]; /* 地址 */ uint8_t address[7]; /* 地址 */
uint8_t Access_Node_Type[2]; /* 接入节点类型 */ uint8_t Access_Node_Type[2]; /* 接入节点类型 */
uint8_t Communication_Methods[2]; /* 通信方式 */ uint8_t Communication_Methods[2]; /* 通信方式 */
uint8_t gw485_Baud[4]; /* 串口波特率,为0代表bms不支持通信 */ uint8_t gw485_Baud[4]; /* 串口波特率 */
uint8_t bat485_Baud[4]; /* 串口波特率 */ uint8_t bat485_Baud[4]; /* 串口波特率,为0代表bms不支持通信 */
/* HY */ /* HY */
uint8_t hardwareID[6]; /* 硬件ID */ uint8_t hardwareID[6]; /* 硬件ID */
@ -108,7 +111,6 @@ typedef struct _config_info{
#define CONFIG_SAVE_ADDR_END (CONFIG_INFO_SIZE + CONFIG_INFO_SIZE) #define CONFIG_SAVE_ADDR_END (CONFIG_INFO_SIZE + CONFIG_INFO_SIZE)
void save_config_info(config_info *save_config_info); void save_config_info(config_info *save_config_info);
void save_backups_config_info(config_info *save_config_info);
void read_config_info(config_info *output_config_info); void read_config_info(config_info *output_config_info);
void checkFlashContent(void); void checkFlashContent(void);
void saveLoopImpedance(float_t *loopImpedance); void saveLoopImpedance(float_t *loopImpedance);
@ -116,5 +118,6 @@ void saveTotalPower(float_t *totalElectricityConsumption, float_t *totalChargCap
void config_info_start(void); void config_info_start(void);
void read_and_process_config_data(void); void read_and_process_config_data(void);
extern uint16_t configCheckFunc(uint8_t *arr_buff, uint8_t len);
#endif /* APP_INC_INFLASH_H_ */ #endif /* APP_INC_INFLASH_H_ */

6
App/inc/pdebug.h
View File

@ -16,9 +16,9 @@
/* Comment out this define to include debug messages */ /* Comment out this define to include debug messages */
//#define NDEBUG //#define NDEBUG
#define log_info_enable 1 #define log_info_enable 0
#define log_warn_enable 1 #define log_warn_enable 0
#define log_error_enable 1 #define log_error_enable 0
/* Comment out this define to include log messages */ /* Comment out this define to include log messages */

6
App/inc/sl_protocol.h
View File

@ -13,10 +13,10 @@
#include "math.h" #include "math.h"
#define buffLen 100 #define buffLen 100
#define configBuffLen 100 #define configBuffLen 300
extern uint8_t rs485_buff[buffLen]; extern uint8_t rs485_buff[buffLen];
extern uint8_t config_buff[configBuffLen]; extern uint8_t config_buff[configBuffLen];
extern uint32_t cfig_len;
/* 功能码 */ /* 功能码 */
typedef enum typedef enum
@ -189,12 +189,10 @@ typedef struct _SL_Mppt_SOther_pack{
/* */ /* */
#define RECV_LENGTH 20
typedef struct _SL_Mppt_Recv_pack{ typedef struct _SL_Mppt_Recv_pack{
uint8_t start_Flag[2]; /* 起始标志 */ uint8_t start_Flag[2]; /* 起始标志 */
uint8_t address[7]; /* 地址 */ uint8_t address[7]; /* 地址 */
uint8_t function_Code; /* 功能码 */ uint8_t function_Code; /* 功能码 */
uint8_t recv_Data[RECV_LENGTH]; /* 其他部分 */
}SL_Mppt_Recv_pack; }SL_Mppt_Recv_pack;
/* 功能码处理函数 */ /* 功能码处理函数 */

32
App/inc/task.h
View File

@ -17,7 +17,7 @@ void Init();
/* 控制运行指示灯和喂狗 */ /* 控制运行指示灯和喂狗 */
#define WdiRunled_reloadVal 1000 /* 任务执行间隔 */ #define WdiRunled_reloadVal 1000 /* 任务执行间隔 */
#define WdiRunled_offset 0 /* 任务执行偏移量 */ #define WdiRunled_offset 700 /* 任务执行偏移量 */
#define wdi_RESET (60 * 60 * 24) /* 一天复位一次 */ #define wdi_RESET (60 * 60 * 24) /* 一天复位一次 */
extern STR_TimeSliceOffset m_WdiRunled; extern STR_TimeSliceOffset m_WdiRunled;
extern void Task_WdiRunled(void); extern void Task_WdiRunled(void);
@ -54,22 +54,27 @@ extern void Task_softStart(void);
/* 启动任务 */ /* 启动任务 */
#define startMpptControl_reloadVal 1000 /* 任务执行间隔 */ #define startMpptControl_reloadVal 1000 /* 任务执行间隔 */
#define startMpptControl_offset 0 /* 任务执行偏移量 */ #define startMpptControl_offset 200 /* 任务执行偏移量 */
extern STR_TimeSliceOffset g_startMpptControl; extern STR_TimeSliceOffset g_startMpptControl;
extern void Task_startMpptControl(void); extern void Task_startMpptControl(void);
/* 根据寄存器数据完成一些判断 */ /* 根据寄存器数据完成一些判断 */
#define dataJudgment_reloadVal 1000 /* 任务执行间隔 */ #define dataJudgment_reloadVal 1000 /* 任务执行间隔 */
#define dataJudgment_offset 0 /* 任务执行偏移量 */ #define dataJudgment_offset 500 /* 任务执行偏移量 */
extern STR_TimeSliceOffset g_dataJudgment; extern STR_TimeSliceOffset g_dataJudgment;
extern void Task_dataJudgment(void); extern void Task_dataJudgment(void);
/* 串口数据解析和处理 */ /* 串口数据解析和处理 */
#define usartSL_reloadVal 100 /* 任务执行间隔 */ #define usartJudge_reloadVal 100 /* 任务执行间隔 */
#define usartSL_offset 0 /* 任务执行偏移量 */ #define usartJudge_offset 0 /* 任务执行偏移量 */
extern STR_TimeSliceOffset m_usart; extern STR_TimeSliceOffset m_usartJudge;
extern void Task_usartSL(void); extern void Task_usartJudge(void);
extern void Task_usartHY(void); #define usartHandle_reloadVal 20 /* 任务执行间隔 */
#define usartHandle_offset 0 /* 任务执行偏移量 */
extern STR_TimeSliceOffset m_usartHandle;
extern void Task_usartHandle(void);
typedef void (*uartJudgeHandle)(device_handle device);
extern uartJudgeHandle uart_judge_handle;
/* 广播回应 */ /* 广播回应 */
#define recvbroadcast_reloadVal 3000 /* 任务执行间隔 */ #define recvbroadcast_reloadVal 3000 /* 任务执行间隔 */
@ -85,5 +90,16 @@ extern void Task_recvbroadcast(void);
extern STR_TimeSliceOffset g_sensorEnableBroadcast; extern STR_TimeSliceOffset g_sensorEnableBroadcast;
extern void Task_sensorEnableBroadcast(void); extern void Task_sensorEnableBroadcast(void);
/* 配置文件读取 */
#define uartConfigFile_reloadVal 200 /* 任务执行间隔 */
#define uartConfigFile_offset 0 /* 任务执行偏移量 */
extern STR_TimeSliceOffset m_uartConfigFile;
extern void Task_uartConfigFile(void);
/* 过载保护 */
#define overloadDelay_reloadVal 10 /* 任务执行间隔 */
#define overloadDelay_offset 0 /* 任务执行偏移量 */
extern STR_TimeSliceOffset g_overloadDelay;
extern void Task_overloadDelay(void);
#endif /* APP_INC_TASK_H_ */ #endif /* APP_INC_TASK_H_ */

9
App/src/collect_Conversion.c
View File

@ -128,16 +128,17 @@ void adcChangeProportionalInit(void)
{ {
if (g_otherParameter.onlyPower) { if (g_otherParameter.onlyPower) {
/* 光伏充电输出电流比例，放大倍数*电阻 */ /* 光伏充电输出电流比例，放大倍数*电阻 */
P_CHG_CURR = (1.0 / (50 * 0.005 / 2)); // P_CHG_CURR = (1.0 / (50 * 0.005 / 2));
P_CHG_CURR = (1.0 / (50 * (1 / (1 / 0.005 * 3))));
/* 光伏充电输出电压比例，分压系数（放电时采集不准） */ /* 光伏充电输出电压比例，分压系数（放电时采集不准） */
//const float P_PV_VOLT_OUT = (47.0 + 10.0) / 10.0; //const float P_PV_VOLT_OUT = (47.0 + 10.0) / 10.0;
//const float P_PV_VOLT_OUT = (47.0 + 4.7) / 4.7; //const float P_PV_VOLT_OUT = (47.0 + 4.7) / 4.7;
P_PV_VOLT_OUT = (56.0 + 10.0) / 10.0; P_PV_VOLT_OUT = (56.0 + 10.0) / 10.0;
/* 放电电流采集电流倍数 */ /* 放电电流采集电流倍数 */
P_DSG_CURR = (1.0 / (50 * 0.005 / 2)); P_DSG_CURR = (1.0 / (50 * (1 / (1 / 0.005 * 5))));
///* 光伏1开路输出电压比例 */ ///* 光伏1开路输出电压比例 */
P_PV1_VOLT_IN = (100 + 4.7) / 4.7; // P_PV1_VOLT_IN = (100 + 4.7) / 4.7;
//const float P_PV1_VOLT_IN = (47.0 + 4.7) / 4.7; P_PV1_VOLT_IN = (47.0 + 4.7) / 4.7;
/* 光伏1开路输出电压比例 */ /* 光伏1开路输出电压比例 */
//const float P_PV1_VOLT_IN = (47 + 4.7) / 4.7; //const float P_PV1_VOLT_IN = (47 + 4.7) / 4.7;
/* 系统电源电压比例 */ /* 系统电源电压比例 */

41
App/src/hy_protocol.c
View File

@ -237,10 +237,12 @@ static int HY_uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, ui
c = uart_dev_in_char(uart_handle); c = uart_dev_in_char(uart_handle);
buff[offset++] = c; buff[offset++] = c;
config_buff[cfig_len++] = c;
/* 匹配起始标志位 */ /* 匹配起始标志位 */
if (offset == HY_analyzeStartFlag || (flag_run > 0)) { if (offset == HY_analyzeStartFlag || (flag_run > 0)) {
if (pack->start_Flag != g_otherParameter.startFlagHY) { if (pack->start_Flag != g_otherParameter.startFlagHY) {
log_info("Match_start_Flag error");
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
@ -258,6 +260,7 @@ static int HY_uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, ui
} }
else { else {
log_info("Match_hardwordID error");
hardwordIDType = 0x00; hardwordIDType = 0x00;
if (flag_run < 1) { if (flag_run < 1) {
flag_run = 1; flag_run = 1;
@ -274,6 +277,7 @@ static int HY_uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, ui
if (flag_run < 2) { if (flag_run < 2) {
flag_run = 2; flag_run = 2;
} }
log_info("Match_CommunicationID error");
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
@ -352,18 +356,22 @@ static int HY_uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, ui
if (flag_run < 3) { if (flag_run < 3) {
flag_run = 3; flag_run = 3;
} }
log_info("Match_controlWord error");
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
} }
} }
/* 匹配通信ID */ /* Æ¥ÅäÊý¾Ý³¤¶È */
if (offset == HY_analyzeDataLen || (flag_run > 4)) { if (offset == HY_analyzeDataLen || (flag_run > 4)) {
if (len != ((pack->dataLen[0] << 8 + pack->dataLen[1]) + 16)) { if (len != ((pack->dataLen[0] << 8 | pack->dataLen[1]) + 16)) {
if (flag_run < 4) { if (flag_run < 4) {
flag_run = 4; flag_run = 4;
} }
log_info("Match_dataLen error: %x", (pack->dataLen[0] << 8 | pack->dataLen[1]) + 16);
log_info("Match_dataLen error: %x", pack->dataLen[0]);
log_info("Match_dataLen error: %x", pack->dataLen[1]);
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
@ -376,10 +384,13 @@ static int HY_uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, ui
if (flag_run < 5) { if (flag_run < 5) {
flag_run = 5; flag_run = 5;
} }
log_info("check: %x, %x", (HY_CheckFunc(buff, len - 2) & 0xff), buff[len - 2]);
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
} }
memset(config_buff, 0, sizeof(config_buff));
cfig_len = 0;
return len; return len;
} }
} }
@ -410,15 +421,19 @@ static void HY_FRT_MsgHandler(device_handle device, uint8_t *pMsg, uint32_t MsgL
*/ */
void HY_read_and_process_uart_data(device_handle device) void HY_read_and_process_uart_data(device_handle device)
{ {
// if (uart_dev_char_present(device)) {
if (uart_dev_char_present(device)) { // Delay_Ms(20);
Delay_Ms(20); // memset(rs485_buff, 0, sizeof(rs485_buff));
// int ret = HY_uart_read_climate_pack(device, rs485_buff, sizeof(rs485_buff));
// if(ret > 0){
// HY_FRT_MsgHandler(device, rs485_buff, ret);
// }
// }
memset(rs485_buff, 0, sizeof(rs485_buff)); memset(rs485_buff, 0, sizeof(rs485_buff));
int ret = HY_uart_read_climate_pack(device, rs485_buff, sizeof(rs485_buff)); int ret = HY_uart_read_climate_pack(device, rs485_buff, sizeof(rs485_buff));
if(ret > 0){ if(ret > 0){
HY_FRT_MsgHandler(device, rs485_buff, ret); HY_FRT_MsgHandler(device, rs485_buff, ret);
} }
}
} }
/* 电池状态数据报 */ /* 电池状态数据报 */
@ -548,6 +563,17 @@ void HY_MsgProcFunc_sensorNumberConfiguration(device_handle device, void *pMsg,
g_otherParameter.communicationID[1] = Tpack->newCommunicationID[1]; g_otherParameter.communicationID[1] = Tpack->newCommunicationID[1];
g_otherParameter.communicationID[2] = Tpack->newCommunicationID[2]; g_otherParameter.communicationID[2] = Tpack->newCommunicationID[2];
g_otherParameter.communicationID[3] = Tpack->newCommunicationID[3]; g_otherParameter.communicationID[3] = Tpack->newCommunicationID[3];
config_info temp_configInfo;
read_config_info(&temp_configInfo);
temp_configInfo.communicationID[0] = Tpack->newCommunicationID[0];
temp_configInfo.communicationID[1] = Tpack->newCommunicationID[1];
temp_configInfo.communicationID[2] = Tpack->newCommunicationID[2];
temp_configInfo.communicationID[3] = Tpack->newCommunicationID[3];
temp_configInfo.crc = configCheckFunc((uint8_t *)&temp_configInfo, CONFIG_INFO_SIZE - 2);
save_config_info(&temp_configInfo);
pack.state = HY_success; pack.state = HY_success;
} }
else { else {
@ -711,6 +737,9 @@ void HY_MsgProcFunc_resetInstruction(device_handle device, void *pMsg, uint32_t
break; break;
} }
} }
/* ¸´Î» */
NVIC_SystemReset();
} }

492
App/src/inflash.c
View File

@ -16,7 +16,7 @@
* @param * @param
* @retval * @retval
*/ */
static uint16_t configCheckFunc(uint8_t *arr_buff, uint8_t len) uint16_t configCheckFunc(uint8_t *arr_buff, uint8_t len)
{ {
uint16_t crc = 0xFFFF; uint16_t crc = 0xFFFF;
uint16_t i, j; uint16_t i, j;
@ -50,7 +50,7 @@ void save_config_info(config_info *save_config_info)
* @param save_config_info ÐèÒª±£´æµÄÅäÖÃÐÅÏ¢ * @param save_config_info ÐèÒª±£´æµÄÅäÖÃÐÅÏ¢
* @retval * @retval
*/ */
void save_backups_config_info(config_info *save_config_info) static void save_backups_config_info(config_info *save_config_info)
{ {
SPI_Flash_Write((uint8_t *)save_config_info, CONFIG_SAVE_addr, CONFIG_INFO_SIZE); SPI_Flash_Write((uint8_t *)save_config_info, CONFIG_SAVE_addr, CONFIG_INFO_SIZE);
} }
@ -61,7 +61,7 @@ void save_backups_config_info(config_info *save_config_info)
*/ */
void read_config_info(config_info *output_config_info) void read_config_info(config_info *output_config_info)
{ {
SPI_Flash_Read((uint8_t *)&output_config_info, CONFIG_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE); SPI_Flash_Read((uint8_t *)output_config_info, CONFIG_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE);
} }
/** /**
@ -70,7 +70,7 @@ void read_config_info(config_info *output_config_info)
*/ */
static void read_backups_config_info(config_info *output_config_info) static void read_backups_config_info(config_info *output_config_info)
{ {
SPI_Flash_Read((uint8_t *)&output_config_info, CONFIG_SAVE_addr, CONFIG_INFO_SIZE); SPI_Flash_Read((uint8_t *)output_config_info, CONFIG_SAVE_addr, CONFIG_INFO_SIZE);
} }
/** /**
@ -84,12 +84,16 @@ void checkFlashContent(void)
config_info temp_configInfo; config_info temp_configInfo;
read_config_info(&temp_configInfo); read_config_info(&temp_configInfo);
// printf("crc : %x %x\n", temp_configInfo.crc, configCheckFunc((uint8_t *)&temp_configInfo, CONFIG_INFO_SIZE - 2));
if (temp_configInfo.crc == configCheckFunc((uint8_t *)&temp_configInfo, CONFIG_INFO_SIZE - 2)) { if (temp_configInfo.crc == configCheckFunc((uint8_t *)&temp_configInfo, CONFIG_INFO_SIZE - 2)) {
// printf("config\n");
return; return;
} }
read_backups_config_info(&temp_configInfo); read_backups_config_info(&temp_configInfo);
if (temp_configInfo.crc == configCheckFunc((uint8_t *)&temp_configInfo, CONFIG_INFO_SIZE - 2)) { if (temp_configInfo.crc == configCheckFunc((uint8_t *)&temp_configInfo, CONFIG_INFO_SIZE - 2)) {
// printf("backups config\n");
save_config_info(&temp_configInfo); save_config_info(&temp_configInfo);
return; return;
} }
@ -98,7 +102,7 @@ void checkFlashContent(void)
.address = {0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11}, .address = {0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11},
.Access_Node_Type = 0x01, .Access_Node_Type = 0x01,
.Communication_Methods = 0x02, .Communication_Methods = 0x02,
.gw485_Baud = 115200, .gw485_Baud = 9600,
.bat485_Baud = 115200, .bat485_Baud = 115200,
.hardwareID = {0x48, 0x59, 0x30, 0x30, 0x30, 0x31}, .hardwareID = {0x48, 0x59, 0x30, 0x30, 0x30, 0x31},
@ -108,12 +112,12 @@ void checkFlashContent(void)
.CommunicationProtocolType = 0x00, .CommunicationProtocolType = 0x00,
.onlyPower = 0x01, .onlyPower = 0x01,
.constantVoltageV = 14.2, .constantVoltageV = 14,
.floatI = 0.02, .floatI = 0.02,
.startSolarOpenCircuitV = 17, .startSolarOpenCircuitV = 17,
.stopSolarOpenCircuitV = 15, .stopSolarOpenCircuitV = 15,
.constantVoltageChargeV = 14.4, .constantVoltageChargeV = 14.4,
.FloatChargeV = 14.2, .FloatChargeV = 14,
.HighSideMosTemperature_stop = 100, .HighSideMosTemperature_stop = 100,
.HighSideMosTemperature_end = 90, .HighSideMosTemperature_end = 90,
.HighSideMosTemperature_start = 50, .HighSideMosTemperature_start = 50,
@ -187,7 +191,7 @@ void config_info_start(void)
g_controlParameter.floatI = temp_configInfo.floatI; g_controlParameter.floatI = temp_configInfo.floatI;
g_controlParameter.startSolarOpenCircuitV = temp_configInfo.startSolarOpenCircuitV; g_controlParameter.startSolarOpenCircuitV = temp_configInfo.startSolarOpenCircuitV;
g_controlParameter.stopSolarOpenCircuitV = temp_configInfo.stopSolarOpenCircuitV; g_controlParameter.stopSolarOpenCircuitV = temp_configInfo.stopSolarOpenCircuitV;
g_controlParameter.stopSolarOpenCircuitV = temp_configInfo.constantVoltageChargeV; g_controlParameter.constantVoltageChargeV = temp_configInfo.constantVoltageChargeV;
g_controlParameter.FloatV = temp_configInfo.FloatChargeV; g_controlParameter.FloatV = temp_configInfo.FloatChargeV;
g_controlParameter.loopImpedance = temp_configInfo.loopImpedance; g_controlParameter.loopImpedance = temp_configInfo.loopImpedance;
g_controlParameter.HighSideMosTemperature_stop = temp_configInfo.HighSideMosTemperature_stop; g_controlParameter.HighSideMosTemperature_stop = temp_configInfo.HighSideMosTemperature_stop;
@ -199,12 +203,34 @@ void config_info_start(void)
g_controlParameter.excessiveLoadFlagTime = temp_configInfo.excessiveLoadFlagTime; g_controlParameter.excessiveLoadFlagTime = temp_configInfo.excessiveLoadFlagTime;
g_controlParameter.eLAgainTime = temp_configInfo.eLAgainTime; g_controlParameter.eLAgainTime = temp_configInfo.eLAgainTime;
strlcpy(g_otherParameter.address, temp_configInfo.address, 7); // strlcpy(g_otherParameter.address, temp_configInfo.address, 7);
g_otherParameter.address[0] = temp_configInfo.address[0];
g_otherParameter.address[1] = temp_configInfo.address[1];
g_otherParameter.address[2] = temp_configInfo.address[2];
g_otherParameter.address[3] = temp_configInfo.address[3];
g_otherParameter.address[4] = temp_configInfo.address[4];
g_otherParameter.address[5] = temp_configInfo.address[5];
g_otherParameter.address[6] = temp_configInfo.address[6];
// printf("address : 0x %x %x %x %x %x %x %x\n", temp_configInfo.address[0]
// , temp_configInfo.address[1], temp_configInfo.address[2], temp_configInfo.address[3]
// , temp_configInfo.address[4], temp_configInfo.address[5], temp_configInfo.address[6]);
g_otherParameter.Access_Node_Type = temp_configInfo.Access_Node_Type; g_otherParameter.Access_Node_Type = temp_configInfo.Access_Node_Type;
g_otherParameter.Communication_Methods = temp_configInfo.Communication_Methods; g_otherParameter.Communication_Methods = temp_configInfo.Communication_Methods;
strlcpy(g_otherParameter.hardwareID, temp_configInfo.hardwareID, 6); // strlcpy(g_otherParameter.hardwareID, temp_configInfo.hardwareID, 6);
strlcpy(g_otherParameter.communicationID, temp_configInfo.communicationID, 4); g_otherParameter.hardwareID[0] = temp_configInfo.hardwareID[0];
g_otherParameter.hardwareID[1] = temp_configInfo.hardwareID[1];
g_otherParameter.hardwareID[2] = temp_configInfo.hardwareID[2];
g_otherParameter.hardwareID[3] = temp_configInfo.hardwareID[3];
g_otherParameter.hardwareID[4] = temp_configInfo.hardwareID[4];
g_otherParameter.hardwareID[5] = temp_configInfo.hardwareID[5];
// strlcpy(g_otherParameter.communicationID, temp_configInfo.communicationID, 4);
g_otherParameter.communicationID[0] = temp_configInfo.communicationID[0];
g_otherParameter.communicationID[1] = temp_configInfo.communicationID[1];
g_otherParameter.communicationID[2] = temp_configInfo.communicationID[2];
g_otherParameter.communicationID[3] = temp_configInfo.communicationID[3];
g_otherParameter.CommunicationProtocolType = temp_configInfo.CommunicationProtocolType; g_otherParameter.CommunicationProtocolType = temp_configInfo.CommunicationProtocolType;
// g_otherParameter.CommunicationProtocolType = 0x01;
g_otherParameter.onlyPower = temp_configInfo.onlyPower;
g_otherParameter.Battery_Voltage = 0; g_otherParameter.Battery_Voltage = 0;
g_otherParameter.Output_Voltage = 0; g_otherParameter.Output_Voltage = 0;
g_otherParameter.Charg_Current = 0; g_otherParameter.Charg_Current = 0;
@ -220,9 +246,14 @@ void config_info_start(void)
g_otherParameter.chargMos_State = 0; g_otherParameter.chargMos_State = 0;
g_otherParameter.DischargMos_State = 0; g_otherParameter.DischargMos_State = 0;
g_otherParameter.MPPT_Mode = 0; g_otherParameter.MPPT_Mode = 0;
strlcpy(g_otherParameter.versionInformation, "SV01_24101501", 13); strlcpy(g_otherParameter.versionInformation, softVer, 13);
// strlcpy(g_otherParameter.startFlagSL, "SL", 2);
// printf("%s", g_otherParameter.startFlagSL);
g_otherParameter.startFlagSL[0] = 'S';
g_otherParameter.startFlagSL[1] = 'L';
strlcpy(g_otherParameter.startFlagSL, "SL", 2);
g_otherParameter.endFlagSL = 0x16; g_otherParameter.endFlagSL = 0x16;
g_otherParameter.startFlagHY = 0x68; g_otherParameter.startFlagHY = 0x68;
g_otherParameter.endFlagHY = 0x16; g_otherParameter.endFlagHY = 0x16;
@ -246,6 +277,42 @@ void config_info_start(void)
g_otherParameter.gw485_Baud = 115200; g_otherParameter.gw485_Baud = 115200;
} }
} }
// printf("");
printf("address : 0x %x %x %x %x %x %x %x\n", g_otherParameter.address[0]
, g_otherParameter.address[1], g_otherParameter.address[2], g_otherParameter.address[3]
, g_otherParameter.address[4], g_otherParameter.address[5], g_otherParameter.address[6]);
printf("Access_Node_Type : 0x%x\n", g_otherParameter.Access_Node_Type);
printf("Communication_Methods : 0x%x\n", g_otherParameter.Communication_Methods);
printf("gw485_Baud : %d\n", g_otherParameter.gw485_Baud);
printf("bat485_Baud : %d\n", g_otherParameter.bat485_Baud);
printf("hardwareID : 0x %x %x %x %x %x %x\n", g_otherParameter.hardwareID[0]
, g_otherParameter.hardwareID[1], g_otherParameter.hardwareID[2], g_otherParameter.hardwareID[3]
, g_otherParameter.hardwareID[4], g_otherParameter.hardwareID[5]);
printf("communicationID : 0x %x %x %x %x\n", g_otherParameter.communicationID[0], g_otherParameter.communicationID[1]
, g_otherParameter.communicationID[2], g_otherParameter.communicationID[3]);
printf("Communication_Methods : 0x%x\n", g_otherParameter.CommunicationProtocolType);
printf("onlyPower : 0x%x\n", g_otherParameter.onlyPower);
printf("constantVoltageV : %d/100\n", (int)(g_controlParameter.constantVoltageV * 100));
printf("floatI : %d/100\n", (int)(g_controlParameter.floatI * 100));
printf("startSolarOpenCircuitV : %d/100\n", (int)(g_controlParameter.startSolarOpenCircuitV * 100));
printf("stopSolarOpenCircuitV : %d/100\n", (int)(g_controlParameter.stopSolarOpenCircuitV * 100));
printf("constantVoltageChargeV : %d/100\n", (int)(g_controlParameter.constantVoltageChargeV * 100));
printf("FloatV : %d/100\n", (int)(g_controlParameter.FloatV * 100));
printf("loopImpedance : %d/100\n", (int)(g_controlParameter.loopImpedance * 100));
printf("HighSideMosTemperature_stop : %d/100\n", (int)(g_controlParameter.HighSideMosTemperature_stop * 100));
printf("HighSideMosTemperature_end : %d/100\n", (int)(g_controlParameter.HighSideMosTemperature_end * 100));
printf("HighSideMosTemperature_start : %d/100\n", (int)(g_controlParameter.HighSideMosTemperature_start * 100));
printf("totalChargCapacity : %d/10000\n", (int)(g_otherParameter.totalChargCapacity * 10000));
printf("totalElectricityConsumption : %d/10000\n", (int)(g_otherParameter.totalElectricityConsumption * 10000));
printf("checkSolarOpenCircuitVTime : %d\n", g_controlParameter.checkSolarOpenCircuitVTime);
printf("sensorEnableBroadcastTime : %d\n", g_controlParameter.sensorEnableBroadcastTime);
printf("outputAgainFlagTime : %d\n", g_controlParameter.outputAgainFlagTime);
printf("excessiveLoadFlagTime : %d\n", g_controlParameter.excessiveLoadFlagTime);
printf("eLAgainTime : %d\n", g_controlParameter.eLAgainTime);
} }
/** /**
@ -254,16 +321,24 @@ void config_info_start(void)
* @retval * @retval
* *
*/ */
#define enlargeScale 100
void read_and_process_config_data(void) void read_and_process_config_data(void)
{ {
while (strlen(config_buff) > RECV_CONFIG_INFO) {
recv_config_info *pack = (recv_config_info *)config_buff; recv_config_info *pack = (recv_config_info *)config_buff;
config_info save_configInfo;
// uint32_t len = strlen(config_buff);
// char buffer[80];
// printf("%d %d\n", cfig_len, RECV_CONFIG_INFO);
while (cfig_len >= RECV_CONFIG_INFO) {
// printf("1\n");
/* 判断起始标志是否正确 */
if (pack->start_Flag[0] != g_otherParameter.startFlagSL[0] if (pack->start_Flag[0] != g_otherParameter.startFlagSL[0]
|| pack->start_Flag[1] != g_otherParameter.startFlagSL[1]) { || pack->start_Flag[1] != g_otherParameter.startFlagSL[1]) {
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); goto err;
continue;
} }
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " start_Flag : 0x%x, 0x%x \n", pack->start_Flag[0], pack->start_Flag[1]);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
// if (pack->address[0] != g_otherParameter.address[0] // if (pack->address[0] != g_otherParameter.address[0]
// || pack->address[1] != g_otherParameter.address[1] // || pack->address[1] != g_otherParameter.address[1]
@ -275,66 +350,391 @@ void read_and_process_config_data(void)
// memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); // memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1);
// continue; // continue;
// } // }
uint16_t temp_u16;
temp_u16 = (uint16_t)pack->Access_Node_Type[0] << 8 /* 判断接入节点类型是否正确 */
save_configInfo.Access_Node_Type = (uint16_t)pack->Access_Node_Type[0] << 8
| (uint16_t)pack->Access_Node_Type[1]; | (uint16_t)pack->Access_Node_Type[1];
// if (temp_u16 != POWERBOX || temp_u16 != MICROMETEOROLOGY) { // memset(buffer, 0, sizeof(buffer));
if (temp_u16 != POWERBOX) { // sprintf(buffer, " Access_Node_Type : 0x%x \n", save_configInfo.Access_Node_Type);
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); // uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
continue; if (save_configInfo.Access_Node_Type != POWERBOX) {
goto err;
} }
temp_u16 = (uint16_t)pack->Communication_Methods[0] << 8 /* 判断通信方式是否正确 */
save_configInfo.Communication_Methods = (uint16_t)pack->Communication_Methods[0] << 8
| (uint16_t)pack->Communication_Methods[1]; | (uint16_t)pack->Communication_Methods[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " Communication_Methods : 0x%x \n", save_configInfo.Communication_Methods);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
// if (temp_u16 != RS485 || temp_u16 != RJ45) { // if (temp_u16 != RS485 || temp_u16 != RJ45) {
if (temp_u16 != RS485) { if (save_configInfo.Communication_Methods != RS485) {
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); goto err;
continue;
} }
uint32_t temp_u32; /* 判断波特率是否正确 */
temp_u32 = (uint32_t)pack->gw485_Baud[0] << 24 save_configInfo.gw485_Baud = (uint32_t)pack->gw485_Baud[0] << 24
| (uint32_t)pack->gw485_Baud[1] << 16 | (uint32_t)pack->gw485_Baud[1] << 16
| (uint32_t)pack->gw485_Baud[2] << 8 | (uint32_t)pack->gw485_Baud[2] << 8
| (uint32_t)pack->gw485_Baud[3]; | (uint32_t)pack->gw485_Baud[3];
if (temp_u32 != 9600 || temp_u32!= 115200) { // memset(buffer, 0, sizeof(buffer));
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); // sprintf(buffer, " gw485_Baud : 0x%x, %d \n", save_configInfo.gw485_Baud, save_configInfo.gw485_Baud);
continue; // uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.gw485_Baud != 9600 && save_configInfo.gw485_Baud != 115200) {
// if (save_configInfo.gw485_Baud != 0x2580 || save_configInfo.gw485_Baud != 115200) {
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " error : %d\n", save_configInfo.gw485_Baud);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
goto err;
} }
temp_u32 = (uint32_t)pack->bat485_Baud[0] << 24 save_configInfo.bat485_Baud = (uint32_t)pack->bat485_Baud[0] << 24
| (uint32_t)pack->bat485_Baud[1] << 16 | (uint32_t)pack->bat485_Baud[1] << 16
| (uint32_t)pack->bat485_Baud[2] << 8 | (uint32_t)pack->bat485_Baud[2] << 8
| (uint32_t)pack->bat485_Baud[3]; | (uint32_t)pack->bat485_Baud[3];
if (temp_u32 != 9600 || temp_u32!= 115200 || temp_u32!= 0) { // memset(buffer, 0, sizeof(buffer));
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); // sprintf(buffer, " bat485_Baud : 0x%x, %d \n", save_configInfo.bat485_Baud, save_configInfo.bat485_Baud);
continue; // uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.bat485_Baud != 9600 && save_configInfo.bat485_Baud!= 115200 && save_configInfo.bat485_Baud!= 0) {
goto err;
} }
if (pack->protocolType != 0x01 || pack->protocolType != 0x02) { /* 判断协议类型是否正确 */
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); if (pack->protocolType != 0x01 && pack->protocolType != 0x02) {
continue; goto err;
}
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " protocolType : 0x%x \n", pack->protocolType);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
/* 判断通信协议类型是否正确 */
if (pack->CommunicationProtocolType != 0x00 && pack->CommunicationProtocolType != 0x01) {
goto err;
}
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " CommunicationProtocolType : 0x%x \n", pack->CommunicationProtocolType);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
/* 判断电源盒类型是否正确 */
if (pack->onlyPower != 0x00 && pack->onlyPower != 0x01) {
goto err;
}
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " onlyPower : 0x%x \n", pack->onlyPower);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
/* 判断恒压充电阈值是否正确 */
save_configInfo.constantVoltageV =
(float_t)(pack->ConstantVoltageV[0] << 8 | pack->ConstantVoltageV[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " constantVoltageV : %d/100 \n", (int)(save_configInfo.constantVoltageV * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.constantVoltageV > 14.4 || save_configInfo.constantVoltageV < 13.5) {
goto err;
} }
if (pack->CommunicationProtocolType != 0x00 || pack->CommunicationProtocolType != 0x01) { /* 判断浮充充电阈值是否正确 */
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); save_configInfo.floatI = (float_t)(pack->FloatI[0] << 8 | pack->FloatI[1]) / enlargeScale;
continue; // memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " floatI : %d/100 \n", (int)(save_configInfo.floatI * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.floatI > 0.2 || save_configInfo.floatI < 0) {
goto err;
} }
if (pack->onlyPower != 0x00 || pack->onlyPower != 0x01) { /* 判断太阳能板开路启动电压是否正确 */
memcpy(config_buff, config_buff + 1, RECV_CONFIG_INFO - 1); save_configInfo.startSolarOpenCircuitV =
continue; (float_t)(pack->startSolarOpenCircuitV[0] << 8 | pack->startSolarOpenCircuitV[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " startSolarOpenCircuitV : %d/100 \n", (int)(save_configInfo.startSolarOpenCircuitV * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.startSolarOpenCircuitV > 24 || save_configInfo.startSolarOpenCircuitV < 14) {
goto err;
} }
float_t temp_float; /* 判断太阳能板关闭电压是否正确 */
save_configInfo.stopSolarOpenCircuitV =
(float_t)(pack->stopSolarOpenCircuitV[0] << 8 | pack->stopSolarOpenCircuitV[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " stopSolarOpenCircuitV : %d/100 \n", (int)(save_configInfo.stopSolarOpenCircuitV * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.stopSolarOpenCircuitV > 17 || save_configInfo.stopSolarOpenCircuitV < 13) {
goto err;
}
/* 判断恒压充电时的输出电压是否正确 */
save_configInfo.constantVoltageChargeV =
(float_t)(pack->constantVoltageChargeV[0] << 8 | pack->constantVoltageChargeV[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " constantVoltageChargeV : %d/100 \n", (int)(save_configInfo.constantVoltageChargeV * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.constantVoltageChargeV > 14.6 || save_configInfo.constantVoltageChargeV < 14) {
goto err;
}
/* 判断浮充充电时的输出电压是否正确 */
save_configInfo.FloatChargeV =
(float_t)(pack->FloatChargeV[0] << 8 | pack->FloatChargeV[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " FloatChargeV : %d/100 \n", (int)(save_configInfo.FloatChargeV * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.FloatChargeV > 14.4 || save_configInfo.FloatChargeV < 13.8) {
goto err;
}
/* 判断mos管停止工作温度是否正确 */
save_configInfo.HighSideMosTemperature_stop =
(float_t)(pack->HighSideMosTemperature_stop[0] << 8 | pack->HighSideMosTemperature_stop[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " HighSideMosTemperature_stop : %d/100 \n", (int)(save_configInfo.HighSideMosTemperature_stop * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.HighSideMosTemperature_stop < 60) {
goto err;
}
/* 判断mos管降低工作功率工作温度是否正确 */
save_configInfo.HighSideMosTemperature_end =
(float_t)(pack->HighSideMosTemperature_end[0] << 8 | pack->HighSideMosTemperature_end[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " HighSideMosTemperature_end : %d/100 \n", (int)(save_configInfo.HighSideMosTemperature_end * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.HighSideMosTemperature_end < 50) {
goto err;
}
/* 判断mos管完全恢复工作温度是否正确 */
save_configInfo.HighSideMosTemperature_start =
(float_t)(pack->HighSideMosTemperature_start[0] << 8 | pack->HighSideMosTemperature_start[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " HighSideMosTemperature_start : %d/100 \n", (int)(save_configInfo.HighSideMosTemperature_start * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.HighSideMosTemperature_start < 40) {
goto err;
}
/* 判断回路阻抗大小是否正确 */
save_configInfo.loopImpedance =
(float_t)(pack->loopImpedance[0] << 8 | pack->loopImpedance[1]) / enlargeScale / 10;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " loopImpedance : %d/100 \n", (int)(save_configInfo.loopImpedance * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.loopImpedance > 1 || save_configInfo.loopImpedance < 0) {
goto err;
}
/* 判断总电量消耗是否正确 */
save_configInfo.totalElectricityConsumption =
(float_t)(pack->totalElectricityConsumption[0] << 8 | pack->totalElectricityConsumption[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " totalElectricityConsumption : %d/100 \n", (int)(save_configInfo.totalElectricityConsumption * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.totalElectricityConsumption != 0) {
goto err;
}
/* 判断总充电电量是否正确 */
save_configInfo.totalChargCapacity =
(float_t)(pack->totalChargCapacity[0] << 8 | pack->totalChargCapacity[1]) / enlargeScale;
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " totalChargCapacity : %d/100 \n", (int)(save_configInfo.totalChargCapacity * 100));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.totalChargCapacity != 0) {
goto err;
}
/* 判断启动任务中太阳能板开路电压检测间隔时间是否正确 */
save_configInfo.checkSolarOpenCircuitVTime =
pack->checkSolarOpenCircuitVTime[0] << 8 | pack->checkSolarOpenCircuitVTime[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " checkSolarOpenCircuitVTime : %d \n", save_configInfo.checkSolarOpenCircuitVTime);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.checkSolarOpenCircuitVTime > 1800 || save_configInfo.checkSolarOpenCircuitVTime < 5) {
goto err;
}
/* 判断传感器运行再次注册的间隔是否正确 */
save_configInfo.sensorEnableBroadcastTime =
pack->sensorEnableBroadcastTime[0] << 8 | pack->sensorEnableBroadcastTime[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " sensorEnableBroadcastTime : %d \n", save_configInfo.sensorEnableBroadcastTime);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.sensorEnableBroadcastTime > 60 || save_configInfo.sensorEnableBroadcastTime < 10) {
goto err;
}
/* 判断出现短路保护后延长该段时间再次检测是否短路，仍然短路则关闭输出的间隔是否正确 */
save_configInfo.outputAgainFlagTime =
pack->outputAgainFlagTime[0] << 8 | pack->outputAgainFlagTime[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " outputAgainFlagTime : %d \n", save_configInfo.outputAgainFlagTime);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.sensorEnableBroadcastTime > 30 || save_configInfo.sensorEnableBroadcastTime < 5) {
goto err;
}
/* 判断出现过载后，在该间隔时间中多次（2次）出现过载，则关闭输出的间隔是否正确 */
save_configInfo.excessiveLoadFlagTime =
pack->excessiveLoadFlagTime[0] << 8 | pack->excessiveLoadFlagTime[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " excessiveLoadFlagTime : %d \n", save_configInfo.excessiveLoadFlagTime);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.excessiveLoadFlagTime > 90 || save_configInfo.excessiveLoadFlagTime < 30) {
goto err;
}
/* 判断出现过载过载保护后，在该间隔段时间后，再次尝试输出的间隔是否正确 */
save_configInfo.eLAgainTime = pack->eLAgainTime[0] << 8 | pack->eLAgainTime[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " eLAgainTime : %d \n", save_configInfo.eLAgainTime);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.eLAgainTime > 3000 || save_configInfo.eLAgainTime < 1000) {
goto err;
}
/* crc校验 */
save_configInfo.crc = pack->crc[0] << 8 | pack->crc[1];
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " crc : %x%x \n", pack->crc[0], pack->crc[1]);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (save_configInfo.crc != CheckFuncSL(config_buff, RECV_CONFIG_INFO - 3)) {
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " CheckFuncSL : %x \n", CheckFuncSL(config_buff, RECV_CONFIG_INFO));
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
goto err;
}
/* 结束标志 */
// memset(buffer, 0, sizeof(buffer));
// sprintf(buffer, " end_Flag : %x \n", pack->end_Flag);
// uart_dev_write(g_gw485_uart4_handle, buffer, sizeof(buffer));
if (pack->end_Flag != 0x16) {
goto err;
}
// printf("address : 0x %x %x %x %x %x %x %x\n", pack->address[0]
// , pack->address[1], pack->address[2], pack->address[3]
// , pack->address[4], pack->address[5], pack->address[6]);
config_info temp_configInfo;
read_config_info(&temp_configInfo);
if (pack->address[0] != 0xFF
|| pack->address[1] != 0xFF
|| pack->address[2] != 0xFF
|| pack->address[3] != 0xFF
|| pack->address[4] != 0xFF
|| pack->address[5] != 0xFF
|| pack->address[6] != 0xFF) {
save_configInfo.address[0] = pack->address[0];
save_configInfo.address[1] = pack->address[1];
save_configInfo.address[2] = pack->address[2];
save_configInfo.address[3] = pack->address[3];
save_configInfo.address[4] = pack->address[4];
save_configInfo.address[5] = pack->address[5];
save_configInfo.address[6] = pack->address[6];
// printf("address : 0x %x %x %x %x %x %x %x\n", save_configInfo.address[0]
// , save_configInfo.address[1], save_configInfo.address[2], save_configInfo.address[3]
// , save_configInfo.address[4], save_configInfo.address[5], save_configInfo.address[6]);
} else {
save_configInfo.address[0] = temp_configInfo.address[0];
save_configInfo.address[1] = temp_configInfo.address[1];
save_configInfo.address[2] = temp_configInfo.address[2];
save_configInfo.address[3] = temp_configInfo.address[3];
save_configInfo.address[4] = temp_configInfo.address[4];
save_configInfo.address[5] = temp_configInfo.address[5];
save_configInfo.address[6] = temp_configInfo.address[6];
}
if (pack->hardwareID[0] != 0xFF
|| pack->hardwareID[1] != 0xFF
|| pack->hardwareID[2] != 0xFF
|| pack->hardwareID[3] != 0xFF
|| pack->hardwareID[4] != 0xFF
|| pack->hardwareID[5] != 0xFF) {
save_configInfo.hardwareID[0] = pack->hardwareID[0];
save_configInfo.hardwareID[1] = pack->hardwareID[1];
save_configInfo.hardwareID[2] = pack->hardwareID[2];
save_configInfo.hardwareID[3] = pack->hardwareID[3];
save_configInfo.hardwareID[4] = pack->hardwareID[4];
save_configInfo.hardwareID[5] = pack->hardwareID[5];
} else {
save_configInfo.hardwareID[0] = temp_configInfo.hardwareID[0];
save_configInfo.hardwareID[1] = temp_configInfo.hardwareID[1];
save_configInfo.hardwareID[2] = temp_configInfo.hardwareID[2];
save_configInfo.hardwareID[3] = temp_configInfo.hardwareID[3];
save_configInfo.hardwareID[4] = temp_configInfo.hardwareID[4];
save_configInfo.hardwareID[5] = temp_configInfo.hardwareID[5];
}
if (pack->communicationID[0] != 0xFF
|| pack->communicationID[1] != 0xFF
|| pack->communicationID[2] != 0xFF
|| pack->communicationID[3] != 0xFF) {
save_configInfo.communicationID[0] = pack->communicationID[0];
save_configInfo.communicationID[1] = pack->communicationID[1];
save_configInfo.communicationID[2] = pack->communicationID[2];
save_configInfo.communicationID[3] = pack->communicationID[3];
} else {
save_configInfo.communicationID[0] = temp_configInfo.communicationID[0];
save_configInfo.communicationID[1] = temp_configInfo.communicationID[1];
save_configInfo.communicationID[2] = temp_configInfo.communicationID[2];
save_configInfo.communicationID[3] = temp_configInfo.communicationID[3];
}
save_configInfo.protocolType = pack->protocolType;
save_configInfo.CommunicationProtocolType = pack->CommunicationProtocolType;
save_configInfo.onlyPower = pack->onlyPower;
save_configInfo.crc = configCheckFunc((uint8_t *)&save_configInfo, CONFIG_INFO_SIZE - 2);
save_backups_config_info(&save_configInfo);
save_config_info(&save_configInfo);
memset(config_buff, 0, sizeof(config_buff));
/* 返回更改配置文件成功 */
SL_Mppt_SOther_pack SUpdateProfile_pack = {0};
SUpdateProfile_pack.start_Flag[0] = g_otherParameter.startFlagSL[0];
SUpdateProfile_pack.start_Flag[1] = g_otherParameter.startFlagSL[1];
SUpdateProfile_pack.address[0] = save_configInfo.address[0];
SUpdateProfile_pack.address[1] = save_configInfo.address[1];
SUpdateProfile_pack.address[2] = save_configInfo.address[2];
SUpdateProfile_pack.address[3] = save_configInfo.address[3];
SUpdateProfile_pack.address[4] = save_configInfo.address[4];
SUpdateProfile_pack.address[5] = save_configInfo.address[5];
SUpdateProfile_pack.address[6] = save_configInfo.address[6];
SUpdateProfile_pack.function_Code = SL_Function_Code_Update_Profile;
SUpdateProfile_pack.state = 0x01;
uint16_t crc = CheckFuncSL((uint8_t *)&SUpdateProfile_pack, SL_MPPT_SOTHER_PACK_SIZE - 3);
SUpdateProfile_pack.check_Bit_H = crc >> 8;
SUpdateProfile_pack.check_Bit_L = crc;
SUpdateProfile_pack.end_Flag = g_otherParameter.endFlagSL;
while (1) {
Delay_Ms(randomDelay());
if (!Check_485_bus_busy(g_gw485_uart4_handle)) {
uart_dev_write(g_gw485_uart4_handle, (uint8_t *)&SUpdateProfile_pack, SL_MPPT_SOTHER_PACK_SIZE);
USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
break;
}
}
/* 复位 */
NVIC_SystemReset();
return;
err:
cfig_len--;
memcpy(config_buff, config_buff + 1, sizeof(config_buff) - 1);
} }
} }

20
App/src/mppt_control.c
View File

@ -32,7 +32,7 @@ void mppt_constantVoltage(float InVoltage)
static float_t kp = 0.005; static float_t kp = 0.005;
static float_t ki = 0.00001; static float_t ki = 0.00001;
float_t pv1Volt = g_otherParameter.Input_Voltage; float_t pv1Volt = g_otherParameter.Solar_In_Circuit_Voltage;
float_t error = pv1Volt - InVoltage; float_t error = pv1Volt - InVoltage;
float_t stepPwm = kp * error + ki * pv1Volt; float_t stepPwm = kp * error + ki * pv1Volt;
g_controlParameter.dutyRatio += stepPwm; g_controlParameter.dutyRatio += stepPwm;
@ -167,22 +167,19 @@ void MpptModeChoice(void)
if ((g_otherParameter.Charg_BatteryCurrent < 0.05 && g_otherParameter.Charg_BatteryCurrent > -0.05) if ((g_otherParameter.Charg_BatteryCurrent < 0.05 && g_otherParameter.Charg_BatteryCurrent > -0.05)
|| g_otherParameter.Battery_Voltage > 16 || g_otherParameter.Battery_Voltage < 8) { || g_otherParameter.Battery_Voltage > 16 || g_otherParameter.Battery_Voltage < 8) {
g_otherParameter.MPPT_Mode = FLOAT; g_otherParameter.MPPT_Mode = FLOAT;
g_otherParameter.batteryState = 0; g_otherParameter.batteryState = 0;
return; return;
} }
/* */ /* */
if ((g_controlParameter.constantVoltageV - 0.2) >= g_otherParameter.Battery_Voltage if ((g_controlParameter.constantVoltageV - 0.2) >= g_otherParameter.Battery_Voltage
// && g_otherParameter.Charg_BatteryCurrent > 0.1) {
&& g_otherParameter.Charg_Current > 0.1) { && g_otherParameter.Charg_Current > 0.1) {
g_otherParameter.MPPT_Mode = CONSTANTCURRENT; g_otherParameter.MPPT_Mode = CONSTANTCURRENT;
return; return;
} }
if (((g_controlParameter.constantVoltageV < g_otherParameter.Battery_Voltage) if ((g_controlParameter.constantVoltageV < g_otherParameter.Battery_Voltage)
&& (g_controlParameter.floatI + 0.1 <= g_otherParameter.Charg_Current))) { && (g_controlParameter.floatI + 0.1 <= g_otherParameter.Charg_Current)) {
g_otherParameter.MPPT_Mode = CONSTANTVOLTAGE; g_otherParameter.MPPT_Mode = CONSTANTVOLTAGE;
return; return;
} }
@ -190,7 +187,6 @@ void MpptModeChoice(void)
if ((((g_controlParameter.constantVoltageV < g_otherParameter.Battery_Voltage) if ((((g_controlParameter.constantVoltageV < g_otherParameter.Battery_Voltage)
&& (g_controlParameter.floatI > g_otherParameter.Charg_Current)) && (g_controlParameter.floatI > g_otherParameter.Charg_Current))
&& (g_controlParameter.floatI > g_otherParameter.Discharg_Current))) { && (g_controlParameter.floatI > g_otherParameter.Discharg_Current))) {
// || g_Mppt_Para.MPPT_Mode == FLOAT) {
g_otherParameter.MPPT_Mode = FLOAT; g_otherParameter.MPPT_Mode = FLOAT;
return; return;
} }
@ -206,12 +202,12 @@ void MpptModeChoice(void)
void MpptContorl(void) void MpptContorl(void)
{ {
g_otherParameter.Output_Voltage = get_PV_VOLT_OUT(); g_otherParameter.Output_Voltage = get_PV_VOLT_OUT();
g_otherParameter.Input_Voltage = get_PV1_VOLT_IN(); g_otherParameter.Solar_In_Circuit_Voltage = get_PV1_VOLT_IN();
/* 出现adc采集出错全为0,退出本次中断 */ // /* 出现adc采集出错全为0,退出本次中断 */
if (g_otherParameter.Discharg_Current == 0 && g_otherParameter.Charg_Current == 0) { // if (g_otherParameter.Discharg_Current == 0 && g_otherParameter.Charg_Current == 0) {
return; // return;
} // }
g_otherParameter.Charg_BatteryCurrent = g_otherParameter.Charg_Current - g_otherParameter.Discharg_Current; g_otherParameter.Charg_BatteryCurrent = g_otherParameter.Charg_Current - g_otherParameter.Discharg_Current;

1
App/src/parameter.c
View File

@ -9,4 +9,3 @@
Mppt_controlparameter g_controlParameter = {0}; Mppt_controlparameter g_controlParameter = {0};
Mppt_otherParameter g_otherParameter = {0}; Mppt_otherParameter g_otherParameter = {0};

44
App/src/sl_protocol.c
View File

@ -18,6 +18,7 @@
uint8_t rs485_buff[buffLen]={0x00}; uint8_t rs485_buff[buffLen]={0x00};
uint8_t config_buff[configBuffLen] = {0x00}; uint8_t config_buff[configBuffLen] = {0x00};
uint32_t cfig_len = 0;
/* 用于解析串口包时的长度 */ /* 用于解析串口包时的长度 */
#define analyzeStartFlag 2 //长度为2时解析起始标志 #define analyzeStartFlag 2 //长度为2时解析起始标志
@ -566,10 +567,12 @@ static int uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, uint3
c = uart_dev_in_char(uart_handle); c = uart_dev_in_char(uart_handle);
buff[offset++] = c; buff[offset++] = c;
config_buff[cfig_len++] = c;
/* 匹配起始标志位 */ /* 匹配起始标志位 */
if (offset == analyzeStartFlag || (flag_run > 0)) { if (offset == analyzeStartFlag || (flag_run > 0)) {
if (!Match_Startflag(pack->start_Flag)) { if (!Match_Startflag(pack->start_Flag)) {
log_info("Match_Startflag error \r\n");
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
@ -583,6 +586,11 @@ static int uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, uint3
if (flag_run < 1) { if (flag_run < 1) {
flag_run = 1; flag_run = 1;
} }
// log_info("Startflag 0x%x 0x%x \n", pack->start_Flag[0], pack->start_Flag[1]);
// log_info("Match address error 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\r\n", pack->address[0], pack->address[1], pack->address[2]
// , pack->address[3], pack->address[4], pack->address[5], pack->address[6]);
// log_info("Match address error 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\r\n", g_otherParameter.address[0], g_otherParameter.address[1], g_otherParameter.address[2]
// , g_otherParameter.address[3], g_otherParameter.address[4], g_otherParameter.address[5], g_otherParameter.address[6]);
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
continue; continue;
@ -604,9 +612,15 @@ static int uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, uint3
log_info("Write_Register\r\n"); log_info("Write_Register\r\n");
} }
// /* 其他帧格式 */
// else if (pack->function_Code == SL_Function_Code_Update_Profile
// || pack->function_Code == SL_Function_Code_Remote_Upgrade) {
// len = SL_MPPT_ROTHER_PACK_SIZE;
// log_info("Other frames\r\n");
// }
/* 其他帧格式 */ /* 其他帧格式 */
else if (pack->function_Code == SL_Function_Code_Update_Profile else if (pack->function_Code == SL_Function_Code_Remote_Upgrade) {
|| pack->function_Code == SL_Function_Code_Remote_Upgrade) {
len = SL_MPPT_ROTHER_PACK_SIZE; len = SL_MPPT_ROTHER_PACK_SIZE;
log_info("Other frames\r\n"); log_info("Other frames\r\n");
} }
@ -684,10 +698,16 @@ static int uart_read_climate_pack(device_handle uart_handle,uint8_t *buff, uint3
if (flag_run < 3) { if (flag_run < 3) {
flag_run = 3; flag_run = 3;
} }
// log_info(" crc : %x, %x", CheckFuncSL(buff, offset - 3), crc_16);
// log_info(" : %x, %x, %x", buff[offset - 3], buff[offset - 2], buff[offset - 1]);
memcpy(buff, buff+1, offset-1); memcpy(buff, buff+1, offset-1);
offset--; offset--;
} else { } else {
memset(config_buff, 0, sizeof(config_buff));
cfig_len = 0;
return offset; return offset;
} }
} }
@ -713,14 +733,28 @@ void FRT_MsgHandler(device_handle device, uint8_t *pMsg, uint32_t MsgLen)
void read_and_process_uart_data(device_handle device) void read_and_process_uart_data(device_handle device)
{ {
if (uart_dev_char_present(device)) { // if (uart_dev_char_present(device)) {
Delay_Ms(20); // Delay_Ms(20);
//// log_info("in read : %d", ring_queue_length(device));
//// char c;
//// while (uart_dev_char_present(device)) {
//// c = uart_dev_in_char(device);
//// log_info("%x ", (c & 0xff));
//// }
//// log_info("");
//
// memset(rs485_buff, 0, sizeof(rs485_buff));
// int ret = uart_read_climate_pack(device, rs485_buff, sizeof(rs485_buff));
// if(ret > 0){
// FRT_MsgHandler(device, rs485_buff, ret);
// }
// }
memset(rs485_buff, 0, sizeof(rs485_buff)); memset(rs485_buff, 0, sizeof(rs485_buff));
int ret = uart_read_climate_pack(device, rs485_buff, sizeof(rs485_buff)); int ret = uart_read_climate_pack(device, rs485_buff, sizeof(rs485_buff));
if(ret > 0){ if(ret > 0){
FRT_MsgHandler(device, rs485_buff, ret); FRT_MsgHandler(device, rs485_buff, ret);
} }
}
} }

139
App/src/task.c
View File

@ -34,6 +34,7 @@
void Init() void Init()
{ {
SPI_Flash_Init(); SPI_Flash_Init();
// SPI_Flash_Erase_Sector(0);
currBuffInit(); currBuffInit();
config_info_start(); config_info_start();
adcChangeProportionalInit(); adcChangeProportionalInit();
@ -44,9 +45,10 @@ void Init()
RUN_LED_Init(); RUN_LED_Init();
WDI_INPUT_Init(); WDI_INPUT_Init();
POW_OUT_CON_Init(); POW_OUT_CON_Init();
POW_FF_CON_Init();
DSG_PROT_Init(); DSG_PROT_Init();
WORK_VOLT_INT_Init(); WORK_VOLT_INT_Init();
TIM3_Init(1); TIM3_Init(10);
TimeSliceOffset_Register(&m_WdiRunled, Task_WdiRunled, WdiRunled_reloadVal, WdiRunled_offset); TimeSliceOffset_Register(&m_WdiRunled, Task_WdiRunled, WdiRunled_reloadVal, WdiRunled_offset);
TimeSliceOffset_Register(&m_refreshRegister, Task_refreshRegister, TimeSliceOffset_Register(&m_refreshRegister, Task_refreshRegister,
@ -57,10 +59,13 @@ void Init()
dataJudgment_reloadVal, dataJudgment_offset); dataJudgment_reloadVal, dataJudgment_offset);
if (g_otherParameter.CommunicationProtocolType == 0x00) { if (g_otherParameter.CommunicationProtocolType == 0x00) {
TimeSliceOffset_Register(&m_usart, Task_usartSL, usartSL_reloadVal, usartSL_offset); uart_judge_handle = read_and_process_uart_data;
} else if (g_otherParameter.CommunicationProtocolType == 0x01) { } else if (g_otherParameter.CommunicationProtocolType == 0x01) {
TimeSliceOffset_Register(&m_usart, Task_usartHY, usartSL_reloadVal, usartSL_offset); uart_judge_handle = HY_read_and_process_uart_data;
} }
TimeSliceOffset_Register(&m_usartJudge, Task_usartJudge, usartJudge_reloadVal, usartJudge_offset);
TimeSliceOffset_Register(&m_uartConfigFile, Task_uartConfigFile,
uartConfigFile_reloadVal, uartConfigFile_offset);
TIM2_Init(1); TIM2_Init(1);
TimeSliceOffset_Start(); /* 启动时间片轮询 */ TimeSliceOffset_Start(); /* 启动时间片轮询 */
@ -84,8 +89,88 @@ void Task_WdiRunled(void)
temp = 0; temp = 0;
NVIC_SystemReset(); NVIC_SystemReset();
} }
static uint8_t tempT = 10;
if (tempT != 0) {
tempT--;
if (tempT == 0) {
GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
GPIO_WriteBit(POW_FF_CON_GPIO, POW_FF_CON_PIN, SET);
}
}
GPIO_WriteBit(WDI_INPUT_GPIO, WDI_INPUT_PIN, SET); GPIO_WriteBit(WDI_INPUT_GPIO, WDI_INPUT_PIN, SET);
GPIO_WriteBit(WDI_INPUT_GPIO, WDI_INPUT_PIN, RESET); GPIO_WriteBit(WDI_INPUT_GPIO, WDI_INPUT_PIN, RESET);
uart_dev_write(g_bat485_uart3_handle, " \n", sizeof(" \n"));
char buffer[80];
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " duty_ratio : %d/1000 \n", (int)(g_controlParameter.dutyRatio * 1000));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " Solar_In_Circuit_Voltage : %d/100 \n", (int)(g_otherParameter.Solar_In_Circuit_Voltage * 100));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " vout : %d/100 \n", (int)(g_otherParameter.Output_Voltage * 100));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " vBattery : %d/100 \n", (int)(g_otherParameter.Battery_Voltage * 100));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " Iout : %d/100 \n", (int)(g_otherParameter.Charg_Current * 100));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " Idisout : %d/100 \n", (int)(g_otherParameter.Discharg_Current * 100));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " mosT : %d/10 \n", (int)(g_otherParameter.HighSideMos_Temperature * 10));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " impedance : %d/1000 \n", (int)(g_controlParameter.loopImpedance * 1000));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " g_impedanceStart : %d \n", g_otherParameter.impedanceStart);
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " mosState : %d \n", (int)(g_otherParameter.DischargMos_State));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " batteryState : %d \n", g_otherParameter.batteryState);
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " outputAgainFlag : %d \n", g_otherParameter.outputAgainFlag);
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " excessiveLoadFlag : %d \n", g_otherParameter.excessiveLoadFlag);
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " inPower : %d/10000 \n", (int)(g_otherParameter.totalChargCapacity * 10000));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " outPower : %d/10000 \n", (int)(g_otherParameter.totalElectricityConsumption * 10000));
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
memset(buffer, 0, sizeof(buffer));
sprintf(buffer, " 0.没有工作; 1.恒流模式; 2.恒压模式; 3.浮充模式 : %d \n", g_otherParameter.MPPT_Mode);
uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
uart_dev_write(g_bat485_uart3_handle, " \n", sizeof(" \n"));
} }
/** /**
@ -361,7 +446,6 @@ void Task_dataJudgment(void)
, impedanceCalculation_reloadVal, impedanceCalculation_reloadVal); , impedanceCalculation_reloadVal, impedanceCalculation_reloadVal);
} }
if (g_otherParameter.overTemperature != 0 if (g_otherParameter.overTemperature != 0
&& g_otherParameter.HighSideMos_Temperature < g_controlParameter.HighSideMosTemperature_start + 3) { && g_otherParameter.HighSideMos_Temperature < g_controlParameter.HighSideMosTemperature_start + 3) {
if (g_otherParameter.overTemperature == 2) { if (g_otherParameter.overTemperature == 2) {
@ -396,16 +480,24 @@ void Task_dataJudgment(void)
* @retval * @retval
* *
*/ */
STR_TimeSliceOffset m_usart; uartJudgeHandle uart_judge_handle;
void Task_usartSL(void) STR_TimeSliceOffset m_usartJudge;
void Task_usartJudge(void)
{ {
read_and_process_uart_data(g_gw485_uart4_handle); if (uart_dev_char_present(g_gw485_uart4_handle)) {
TimeSliceOffset_Register(&m_usartHandle, Task_usartHandle
, usartHandle_reloadVal, usartHandle_offset);
}
} }
void Task_usartHY(void) STR_TimeSliceOffset m_usartHandle;
void Task_usartHandle(void)
{ {
HY_read_and_process_uart_data(g_gw485_uart4_handle); TimeSliceOffset_Unregister(&m_usartHandle);
m_usartHandle.runFlag = 0;
uart_judge_handle(g_gw485_uart4_handle);
} }
/** /**
* @brief 接收到广播指令后,发送数据给网关，未接收到指令再次发送，最多三次，间隔时间3s * @brief 接收到广播指令后,发送数据给网关，未接收到指令再次发送，最多三次，间隔时间3s
* @param * @param
@ -484,7 +576,7 @@ void Task_recvbroadcast(void)
run_number = 0; run_number = 0;
return; return;
} }
uart_dev_write(g_recvBroadcastDevice, (uint8_t *)&recvpack, SL_MPPT_REGISTRATIONREQUEST_PACK_SIZE + 1); uart_dev_write(g_recvBroadcastDevice, (uint8_t *)&recvpack, SL_MPPT_REGISTRATIONREQUEST_PACK_SIZE);
if (g_recvBroadcastDevice == g_bat485_uart3_handle) { if (g_recvBroadcastDevice == g_bat485_uart3_handle) {
USART_ITConfig(USART3, USART_IT_RXNE, ENABLE); USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
@ -519,3 +611,30 @@ void Task_sensorEnableBroadcast(void)
return; return;
} }
/**
* @brief 接收配置文件
* @param
* @retval
*
*/
STR_TimeSliceOffset m_uartConfigFile;
void Task_uartConfigFile(void)
{
read_and_process_config_data();
}
/**
* @brief 过载延时
* @param
* @retval
*
*/
STR_TimeSliceOffset g_overloadDelay;
void Task_overloadDelay(void)
{
TimeSliceOffset_Unregister(&g_overloadDelay);
g_overloadDelay.runFlag = 0;
WORK_VOLT_INT_open();
}

6
App/src/uart_dev.c
View File

@ -19,7 +19,7 @@ device_handle g_bat485_uart3_handle;
device_handle g_gw485_uart4_handle; device_handle g_gw485_uart4_handle;
static uint8_t bat485_in_buff[200]; static uint8_t bat485_in_buff[200];
static uint8_t gw485_in_buff[300]; static uint8_t gw485_in_buff[200];
uint8_t rs485_out_buff[100]; uint8_t rs485_out_buff[100];
@ -106,9 +106,9 @@ void uart_init(uartIndex_e uart_index, int baud)
{ {
if (uart_index == BAT485_UART_INDEX) { if (uart_index == BAT485_UART_INDEX) {
// BAT_485_Init(uart_devices[0].uart_baudrate); // BAT_485_Init(uart_devices[0].uart_baudrate);
BAT_485_Init(115200); BAT_485_Init(baud);
} else if (uart_index == GW485_UART_INDEX) { } else if (uart_index == GW485_UART_INDEX) {
GW_485_Init(uart_devices[1].uart_baudrate); GW_485_Init(baud);
} }
} }

8
Hardware/inc/gpio.h
View File

@ -70,6 +70,14 @@ void EnPowerSupply_Init(void);
/* WORK_VOLT_INT --> PA12 */ /* WORK_VOLT_INT --> PA12 */
#define WORK_VOLT_INT_GPIO GPIOA #define WORK_VOLT_INT_GPIO GPIOA
#define WORK_VOLT_INT_PIN GPIO_Pin_12 #define WORK_VOLT_INT_PIN GPIO_Pin_12
void WORK_VOLT_INT_open(void);
void WORK_VOLT_INT_close(void);
void WORK_VOLT_INT_Init(void); void WORK_VOLT_INT_Init(void);
/* 防反mos的控制 */
/* POW_FF_CON --> PA15 */
#define POW_FF_CON_GPIO GPIOA
#define POW_FF_CON_PIN GPIO_Pin_15
void POW_FF_CON_Init(void);
#endif /* HARDWARE_INC_GPIO_H_ */ #endif /* HARDWARE_INC_GPIO_H_ */

48
Hardware/src/gpio.c
View File

@ -135,14 +135,8 @@ void EnPowerSupply_Init(void)
void EXTI15_10_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast"))); void EXTI15_10_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
void WORK_VOLT_INT_Init(void) void WORK_VOLT_INT_open(void)
{ {
RCC_PB2PeriphClockCmd(RCC_PB2Periph_AFIO | RCC_PB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = WORK_VOLT_INT_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; //下拉输入
GPIO_Init(WORK_VOLT_INT_GPIO, &GPIO_InitStructure);
/* GPIOA ----> EXTI_Line12 */ /* GPIOA ----> EXTI_Line12 */
EXTI_InitTypeDef EXTI_InitStructure; EXTI_InitTypeDef EXTI_InitStructure;
GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource12);//指定中断/事件线的输入源，实际上是设定外部中断配置寄存器AFIO_EXTICRx的值，此处为PA12 GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource12);//指定中断/事件线的输入源，实际上是设定外部中断配置寄存器AFIO_EXTICRx的值，此处为PA12
@ -151,6 +145,29 @@ void WORK_VOLT_INT_Init(void)
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; //EXTI边沿触发事件，此处选择为上升沿触发 EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; //EXTI边沿触发事件，此处选择为上升沿触发
EXTI_InitStructure.EXTI_LineCmd = ENABLE; //使能EXTI线 EXTI_InitStructure.EXTI_LineCmd = ENABLE; //使能EXTI线
EXTI_Init(&EXTI_InitStructure); EXTI_Init(&EXTI_InitStructure);
}
void WORK_VOLT_INT_close(void)
{
/* GPIOA ----> EXTI_Line12 */
EXTI_InitTypeDef EXTI_InitStructure;
GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource12);//指定中断/事件线的输入源，实际上是设定外部中断配置寄存器AFIO_EXTICRx的值，此处为PA12
EXTI_InitStructure.EXTI_Line = EXTI_Line12; //EXTI中断/事件线选择，此处选择EXTI_Line12
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //EXTI模式选择，此处选择为产生中断模式
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; //EXTI边沿触发事件，此处选择为上升沿触发
EXTI_InitStructure.EXTI_LineCmd = DISABLE; //使能EXTI线
EXTI_Init(&EXTI_InitStructure);
}
void WORK_VOLT_INT_Init(void)
{
RCC_PB2PeriphClockCmd(RCC_PB2Periph_AFIO | RCC_PB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = WORK_VOLT_INT_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; //下拉输入
GPIO_Init(WORK_VOLT_INT_GPIO, &GPIO_InitStructure);
WORK_VOLT_INT_open();
NVIC_InitTypeDef NVIC_InitStructure; NVIC_InitTypeDef NVIC_InitStructure;
NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn; //使能EXTI12中断通道 NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn; //使能EXTI12中断通道
@ -163,6 +180,11 @@ void WORK_VOLT_INT_Init(void)
void EXTI15_10_IRQHandler(void) void EXTI15_10_IRQHandler(void)
{ {
if(EXTI_GetITStatus(EXTI_Line12)==SET) { //EXTI_GetITStatus用来获取中断标志位状态，如果EXTI线产生中断则返回SET，否则返回RESET if(EXTI_GetITStatus(EXTI_Line12)==SET) { //EXTI_GetITStatus用来获取中断标志位状态，如果EXTI线产生中断则返回SET，否则返回RESET
// WORK_VOLT_INT_close();
// TimeSliceOffset_Register(&g_overloadDelay, Task_overloadDelay
// , overloadDelay_reloadVal, overloadDelay_offset);
Delay_Us(10);
// WORK_VOLT_INT_open();
EXTI_ClearITPendingBit(EXTI_Line12); //清除中断标志位 EXTI_ClearITPendingBit(EXTI_Line12); //清除中断标志位
if (0 == g_otherParameter.excessiveLoadFlag) { if (0 == g_otherParameter.excessiveLoadFlag) {
TimeSliceOffset_Register(&g_excessiveLoad, Task_excessiveLoad TimeSliceOffset_Register(&g_excessiveLoad, Task_excessiveLoad
@ -172,3 +194,15 @@ void EXTI15_10_IRQHandler(void)
} }
} }
void POW_FF_CON_Init(void)
{
RCC_PB2PeriphClockCmd(RCC_PB2Periph_GPIOA, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = POW_FF_CON_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; //推挽输出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(POW_FF_CON_GPIO, &GPIO_InitStructure);
// GPIO_WriteBit(POW_FF_CON_GPIO, POW_FF_CON_PIN, SET);
GPIO_WriteBit(POW_FF_CON_GPIO, POW_FF_CON_PIN, RESET);
}

18
Hardware/src/rs485.c
View File

@ -8,7 +8,7 @@
#include "rs485.h" #include "rs485.h"
#include "uart_dev.h" #include "uart_dev.h"
#include "ring_queue.h" #include "ring_queue.h"
#include "pdebug.h"
void USART3_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast"))); void USART3_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
void USART4_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast"))); void USART4_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
@ -59,7 +59,8 @@ void GW_485_Init(int baud)
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; //设置PB1为浮空输入 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; //设置PB1为浮空输入
GPIO_Init(GPIOB, &GPIO_InitStructure); GPIO_Init(GPIOB, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = baud; // USART_InitStructure.USART_BaudRate = baud;
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No; USART_InitStructure.USART_Parity = USART_Parity_No;
@ -68,7 +69,7 @@ void GW_485_Init(int baud)
USART_Init(USART4, &USART_InitStructure); USART_Init(USART4, &USART_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = USART4_IRQn; NVIC_InitStructure.NVIC_IRQChannel = USART4_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=1; //抢占优先级为1 NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //抢占优先级为1
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; //子优先级为2 NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; //子优先级为2
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQ通道使能 NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQ通道使能
NVIC_Init(&NVIC_InitStructure); //中断优先级初始化 NVIC_Init(&NVIC_InitStructure); //中断优先级初始化
@ -119,7 +120,7 @@ void BAT_485_Init(int baud)
USART_Init(USART3, &USART_InitStructure); USART_Init(USART3, &USART_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn; NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=1; //抢占优先级为1 NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //抢占优先级为1
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; //子优先级为1 NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; //子优先级为1
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQ通道使能 NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //IRQ通道使能
NVIC_Init(&NVIC_InitStructure); //中断优先级初始化 NVIC_Init(&NVIC_InitStructure); //中断优先级初始化
@ -295,12 +296,15 @@ void USART4_IRQHandler(void)
{ {
// printf(" in usart4 \n"); // printf(" in usart4 \n");
// USART_ClearITPendingBit(USART4, USART_IT_RXNE); //清除中断标志 // USART_ClearITPendingBit(USART4, USART_IT_RXNE); //清除中断标志
// uint8_t c = 0;
// c = USART4_Rbuffer[0];
// log_info("%x ", (USART4_Rbuffer[0] & 0xff));
USART4_Rbuffer[0] = USART_ReceiveData(USART4); //接收数据 USART4_Rbuffer[0] = USART_ReceiveData(USART4); //接收数据
uint8_t c = 0;
uart_device_info *dev = (uart_device_info *)g_gw485_uart4_handle; uart_device_info *dev = (uart_device_info *)g_gw485_uart4_handle;
c = USART4_Rbuffer[0]; // log_info("%x ", (USART4_Rbuffer[0] & 0xff));
if(!RingQueueFull(&dev->uart_ring_queue)) if(!RingQueueFull(&dev->uart_ring_queue))
InRingQueue(&dev->uart_ring_queue, c); InRingQueue(&dev->uart_ring_queue, USART4_Rbuffer[0]);
} }
// if(USART_GetFlagStatus(USART4,USART_FLAG_TC) == SET) //中断发送 // if(USART_GetFlagStatus(USART4,USART_FLAG_TC) == SET) //中断发送

4
Hardware/src/tim.c
View File

@ -112,8 +112,8 @@ void TIM2_IRQHandler(void)
g_otherParameter.Charg_Current = get_CHG_CURR(); g_otherParameter.Charg_Current = get_CHG_CURR();
g_otherParameter.Discharg_Current = get_DSG_CURR(); g_otherParameter.Discharg_Current = get_DSG_CURR();
totalElectricityConsumption += g_otherParameter.Charg_Current * g_otherParameter.Output_Voltage; totalChargCapacity += g_otherParameter.Charg_Current * g_otherParameter.Output_Voltage;
totalChargCapacity += g_otherParameter.Discharg_Current * g_otherParameter.Output_Voltage; totalElectricityConsumption += g_otherParameter.Discharg_Current * g_otherParameter.Output_Voltage;
} }
} }

BIN
obj/App/src/collect_Conversion.o
View File

Binary file not shown.

BIN
obj/App/src/hy_protocol.o
View File

Binary file not shown.

BIN
obj/App/src/inflash.o
View File

Binary file not shown.

BIN
obj/App/src/mppt_control.o
View File

Binary file not shown.

BIN
obj/App/src/sl_protocol.o
View File

Binary file not shown.

BIN
obj/App/src/task.o
View File

Binary file not shown.

BIN
obj/App/src/uart_dev.o
View File

Binary file not shown.

BIN
obj/Hardware/src/gpio.o
View File

Binary file not shown.

7
obj/Hardware/src/rs485.d
View File

@ -27,7 +27,8 @@ Hardware/src/rs485.o: ../Hardware/src/rs485.c \
D:\psx\MPPT\git\Peripheral\inc/ch32l103_lptim.h \ D:\psx\MPPT\git\Peripheral\inc/ch32l103_lptim.h \
D:\psx\MPPT\git\Peripheral\inc/ch32l103_opa.h \ D:\psx\MPPT\git\Peripheral\inc/ch32l103_opa.h \
D:\psx\MPPT\git\App\inc/uart_dev.h \ D:\psx\MPPT\git\App\inc/uart_dev.h \
D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h \
D:\psx\MPPT\git\App\inc/pdebug.h D:\psx\MPPT\git\App\inc/uart_dev.h
D:\psx\MPPT\git\Hardware\inc/rs485.h: D:\psx\MPPT\git\Hardware\inc/rs485.h:
@ -90,3 +91,7 @@ D:\psx\MPPT\git\Peripheral\inc/ch32l103_opa.h:
D:\psx\MPPT\git\App\inc/uart_dev.h: D:\psx\MPPT\git\App\inc/uart_dev.h:
D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h: D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h:
D:\psx\MPPT\git\App\inc/pdebug.h:
D:\psx\MPPT\git\App\inc/uart_dev.h:

BIN
obj/Hardware/src/rs485.o
View File

Binary file not shown.

BIN
obj/Hardware/src/tim.o
View File

Binary file not shown.

BIN
obj/User/main.o
View File

Binary file not shown.

BIN
obj/mppt_Nos_V0.4.bin
View File

Binary file not shown.

BIN
obj/mppt_Nos_V0.4.elf
View File

Binary file not shown.

4052
obj/mppt_Nos_V0.4.hex
View File

File diff suppressed because it is too large Load Diff

20901
obj/mppt_Nos_V0.4.lst
View File

File diff suppressed because it is too large Load Diff

1699
obj/mppt_Nos_V0.4.map
View File

File diff suppressed because it is too large Load Diff