52 changed files with 14282 additions and 16934 deletions
--- a/.cproject
+++ b/.cproject
@ -17,7 +17,7 @@
 				</extensions>
 			</storageModule>
 			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074" name="obj" parent="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release" postbuildStep="riscv-none-embed-objcopy -O binary &quot;${ProjName}.elf&quot;  &quot;${ProjName}.bin&quot;">
+				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074" name="obj" parent="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release">
 					<folderInfo id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1008047074." name="/" resourcePath="">
 						<toolChain id="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.release.231146001" name="RISC-V Cross GCC" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.release">
 							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash.1311852988" name="Create flash image" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash" useByScannerDiscovery="false" value="true" valueType="boolean"/>
@ -51,7 +51,7 @@
 							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.nocommon.2003631682" name="No common unitialized (-fno-common)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.nocommon" useByScannerDiscovery="true" value="true" valueType="boolean"/>
 							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.xw.1819910041" name="Extra Compressed extension (RVXW)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.xw" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.saverestore.1179366128" name="Small prologue/epilogue (-msave-restore)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.saverestore" useByScannerDiscovery="false" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.rvGcc.536610708" name="RISC-V Compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.rvGcc" useByScannerDiscovery="false" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.base.target.rvGcc.8" valueType="enumerated"/>
+							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.rvGcc.536610708" name="RISC-V Compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.rvGcc" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.base.target.rvGcc.8" valueType="enumerated"/>
 							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform.1944008784" isAbstract="false" osList="all" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform"/>
 							<builder buildPath="${workspace_loc:/mppt_Nos_V0.4}/obj" id="ilg.gnumcueclipse.managedbuild.cross.riscv.builder.1421508906" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="GNU Make 构建器" parallelBuildOn="true" parallelizationNumber="optimal" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.builder"/>
 							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.1244756189" name="GNU RISC-V Cross Assembler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler">
@ -71,7 +71,6 @@
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/mppt_Nos_V0.4/Hardware/inc}&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/mppt_Nos_V0.4/Drivers/RingQueue}&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/mppt_Nos_V0.4/Drivers/TimeSliceOffset}&quot;"/>
-									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/mppt_Nos_V0.4/Drivers/RingQueue2}&quot;"/>
 								</option>
 								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.std.2020844713" name="Language standard" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.std" useByScannerDiscovery="true" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.std.gnu99" valueType="enumerated"/>
 								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.defs.177116515" name="Defined symbols (-D)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.compiler.defs" useByScannerDiscovery="true" valueType="definedSymbols"/>
@ -89,7 +88,7 @@
 								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.usenewlibnosys.351964161" name="Do not use syscalls (--specs=nosys.specs)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.usenewlibnosys" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.otherobjs.16994550" name="Other objects" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.otherobjs" useByScannerDiscovery="false" valueType="userObjs"/>
 								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.flags.1125808200" name="Linker flags (-Xlinker [option])" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.flags" useByScannerDiscovery="false" valueType="stringList"/>
-								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.libs.1448587709" name="Libraries (-l)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.libs" useByScannerDiscovery="false" valueType="libs">
+								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.libs.1448587709" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.libs" useByScannerDiscovery="false" valueType="libs">
 									<listOptionValue builtIn="false" value="m"/>
 								</option>
 								<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.input.1859223768" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.input">
@ -151,5 +150,5 @@
 	</storageModule>
 	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
 	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
-	<storageModule moduleId="refreshScope"/>
+	
 </cproject>
--- a/.settings/language.settings.xml
+++ b/.settings/language.settings.xml
@ -5,7 +5,7 @@
 			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
 			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
 			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="1028566790370062624" id="ilg.gnumcueclipse.managedbuild.cross.riscv.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT RISC-V Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="-156117377827207421" id="ilg.gnumcueclipse.managedbuild.cross.riscv.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT RISC-V Cross GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
 				<language-scope id="org.eclipse.cdt.core.gcc"/>
 				<language-scope id="org.eclipse.cdt.core.g++"/>
 			</provider>
--- a/App/inc/collect_Conversion.h
+++ b/App/inc/collect_Conversion.h
@ -10,16 +10,6 @@

 #include "debug.h"
 #include "adc.h"
-#include "ring_queue2.h"
-
-#define adcBuffSize 100
-typedef struct _ADC_DATA{
-    RingQueue2 RQCHG_CURR;
-    RingQueue2 RQDSG_CURR;
-    int32_t total_CHG_CURR;     /* 充电电流adc之和 */
-    int32_t total_DSG_CURR;     /* 放电电流adc之和 */
-}ADC_DATA;
-extern ADC_DATA g_adcData;

 float get_CHG_CURR(void);
 float get_PV_VOLT_OUT(void);
@ -28,6 +18,5 @@ float get_PV1_VOLT_IN(void);
 float get_PV_VOLT_IN1(void);
 float get_MOSFET_Temper(void);
 float get_PV2_VOLT_IN(void);
-void currBuffInit(void);

 #endif /* APP_INC_COLLECT_CONVERSION_H_ */
--- a/App/inc/inflash.h
+++ b/App/inc/inflash.h
@ -52,19 +52,14 @@ typedef struct _config_info{
    uint16_t stopSolarOpenCircuitV;         /* 太阳能板开路电压高于该(电压 / 100)停止充电 */
    uint16_t constantVoltageChargeV;        /* 恒压充电时的输出电压 */
    uint16_t trickleChargeC;                /* 涓流充电电流 */
-//    uint16_t FloatTime;                     /* 浮充时间(秒) */
-    uint16_t FloatV;                        /* 浮充电压 */
+    uint16_t FloatTime;                     /* 浮充时间(秒) */
    uint16_t checkSolarOpenCircuitVTime;    /* 启动任务中太阳能板开路电压检测时间 */
    uint16_t registerRefreshTime;           /* 寄存器数据刷新时间 */
-    uint16_t loopImpedance;                 /* 回路阻抗大小 */
-//    uint16_t resRefreshTime;                /* 回路阻抗计算间隔时长 */
+    uint16_t resRefreshTime;                /* 线阻计算间隔时长 */
    uint16_t sensorEnableBroadcastTime;     /* 传感器运行再次注册的间隔 */
    uint16_t HighSideMosTemperature_stop;   /* 当上桥温度达到该值时，停止输出 */
    uint16_t HighSideMosTemperature_end;    /* 当上桥温度上升到该值时，降低功率运行 */
    uint16_t HighSideMosTemperature_start;  /* 当上桥温度降低到该值时，按照正常情况输出 */
-    uint16_t outputAgainFlagTime;           /* 出现短路保护后延长该段时间再次检测是否短路，仍然短路则关闭输出 */
-    uint16_t excessiveLoadFlagTime;         /* 出现过载后，在该段时间中再次出现过载，则关闭输出 */
-    uint16_t eLAgainTime;                   /* 出现过载过载保护后，该段时间后，再次尝试输出 */
    uint8_t  end_Flag;                      /* 结束标志 */
 }config_info;
 #define CONFIG_INFO_SIZE    (sizeof(config_info))
@ -75,8 +70,8 @@ extern config_info g_slConfigInfo;
 #define FLASH_SAVE_ADDR_BEGIN   (0x00)
 #define FLASH_SAVE_ADDR_END     (0x00 + CONFIG_INFO_SIZE)

-void save_config_info(config_info *save_config_info);
+void save_config_info(config_info save_config_info);
 uint8_t read_config_info(void);
-uint8_t read_config_info1(config_info *in_config_info);
+

 #endif /* APP_INC_INFLASH_H_ */
--- a/App/inc/sl_protocol.h
+++ b/App/inc/sl_protocol.h
@ -228,13 +228,11 @@ typedef struct _SL_Mppt_para{
  float_t Battery_Voltage;              /* 电池电压  */
  float_t Charg_Current;                /* 充电电流（流向电池+负载）   */
  float_t Discharg_Current;             /* 放电电流（流向负载）   */
-  float_t Input_Voltage;                /* 太阳能板输出电压  */
-  float_t Solar_Open_Circuit_Voltage;   /* 太阳能板开路电压  */
+  float_t Input_Voltage;                /* 太阳能开路电压  */
+  float_t Solar_Open_Circuit_Voltage;   /* 太阳能开路电压  */
  float_t HighSideMos_Temperature;      /* 高端mos的温度 */
  uint16_t DischargMos_State;           /* 放电mos的状态 */
  uint16_t MPPT_Mode;  /* 工作模式 */
-  float_t inPower;                      /* 总充电电量 */
-  float_t outPower;                     /* 总消耗电量 */
 }SL_Mppt_para;
 extern SL_Mppt_para g_Mppt_Para;

--- a/App/inc/task.h
+++ b/App/inc/task.h
@ -13,9 +13,6 @@
 #include "uart_dev.h"
 #include "math.h"

-
-
-//extern uint8_t g_interruptNum;
 void stop_mpptWork(void);
 void start_mpptWork(void);

@ -47,7 +44,7 @@ extern STR_TimeSliceOffset m_wdi;
 extern void Task_wdi(void);

 #define refreshRegister_reloadVal 1000  /* 任务执行间隔  */
-#define refreshRegister_offset 100        /* 任务执行偏移量  */
+#define refreshRegister_offset 0        /* 任务执行偏移量  */
 extern STR_TimeSliceOffset m_refreshRegister;
 extern uint8_t overTemperature;
 extern void Task_refreshRegister(void);
@ -60,26 +57,19 @@ extern uint8_t  g_recvBroadcastRegisterNumber;  /*
 extern STR_TimeSliceOffset m_recvbroadcast;
 extern void Task_recvbroadcast(void);

-#define impedanceCalculation_reloadVal 200              /* 任务执行间隔  */
+#define impedanceCalculation_reloadVal 1000              /* 任务执行间隔  */
 #define impedanceCalculation_offset 0                   /* 任务执行偏移量  */
 extern float_t g_impedance;
-extern uint8_t g_batteryState;
-extern uint8_t g_impedanceStart;
+extern float_t voltOut;
 extern STR_TimeSliceOffset m_impedanceCalculation;
 extern void Task_impedanceCalculation(void);

-#define outputAgain_reloadVal 1000              /* 任务执行间隔  */
+#define outputAgain_reloadVal 2              /* 任务执行间隔  */
 #define outputAgain_offset 0                   /* 任务执行偏移量  */
 extern uint8_t outputAgainFlag;
 extern STR_TimeSliceOffset m_outputAgain;
 extern void Task_outputAgain(void);

-#define excessiveLoad_reloadVal 1000             /* 任务执行间隔  */
-#define excessiveLoad_offset 0                   /* 任务执行偏移量  */
-extern uint8_t excessiveLoadFlag;
-extern STR_TimeSliceOffset m_excessiveLoad;
-extern void Task_excessiveLoad(void);
-
 #define sensorEnableBroadcast_reloadVal 1000           /* 任务执行间隔  */
 #define sensorEnableBroadcast_offset 0               /* 任务执行偏移量  */
 extern STR_TimeSliceOffset m_sensorEnableBroadcast;
--- a/App/src/collect_Conversion.c
+++ b/App/src/collect_Conversion.c
@ -32,13 +32,12 @@
 const float P_CHG_CURR = (1.0 / (50 * 0.005 / 2));
 /* 光伏充电输出电压比例，分压系数（放电时采集不准） */
 //const float P_PV_VOLT_OUT = (47.0 + 10.0) / 10.0;
-//const float P_PV_VOLT_OUT = (47.0 + 4.7) / 4.7;
-const float P_PV_VOLT_OUT = (56.0 + 10.0) / 10.0;
+const float P_PV_VOLT_OUT = (47.0 + 4.7) / 4.7;
 /* 放电电流采集电流倍数 */
 const float P_DSG_CURR = (1.0 / (50 * 0.005 / 2));
 ///* 光伏1开路输出电压比例 */
-const float P_PV1_VOLT_IN = (100 + 4.7) / 4.7;
-//const float P_PV1_VOLT_IN = (47.0 + 4.7) / 4.7;
+//const float P_PV1_VOLT_IN = (100 + 4.7) / 4.7;
+const float P_PV1_VOLT_IN = (100.0 + 4.7) / 4.7;
 /* 光伏1开路输出电压比例 */
 //const float P_PV1_VOLT_IN = (47 + 4.7) / 4.7;
 /* 系统电源电压比例 */
@ -129,10 +128,6 @@ const uint16_t mosTemperADC[mosTemperADCLen] = {
         336                                                        /* 100 ℃ */
 };

-ADC_DATA g_adcData;
-static uint16_t CHG_buff[adcBuffSize];
-static uint16_t DSG_buff[adcBuffSize];
-

 static uint16_t get_adc(uint8_t ADC_Channel);
 static uint16_t get_aftercalculationAdc(uint8_t ADC_Channel);
@ -148,7 +143,7 @@ uint16_t get_aftercalculationAdc(uint8_t ADC_Channel)
    return middleAverageFilter(ADC_Channel);
 }

-#define N 4
+#define N 6
 /**
  * @brief  中位值平均滤波
  * @param  ADC_Channel ADC通道
@ -176,11 +171,11 @@ uint16_t middleAverageFilter(uint8_t ADC_Channel)
            }
        }
    }
-    for(i = 1; i < N-1; ++i)
+    for(i = 2; i < N-2; ++i)
    {
        sum += value_buf[i];
    }
-    return sum/(N-2);
+    return sum/(N-4);
 }

 /**
@ -225,16 +220,7 @@ float get_CHG_CURR(void)
    uint16_t I_ADC;

 //    I_ADC = Get_ConversionVal(get_adc(CHG_CURR));
-    OutRingQueue2(&g_adcData.RQCHG_CURR, &I_ADC);
-    g_adcData.total_CHG_CURR -= I_ADC;
-
    I_ADC = get_aftercalculationAdc(CHG_CURR);
-    InRingQueue2(&g_adcData.RQCHG_CURR, I_ADC);
-    g_adcData.total_CHG_CURR += I_ADC;
-
-    I_ADC = g_adcData.total_CHG_CURR / (adcBuffSize - 1);
-
-
 //    I_ADC = get_adc(CHG_CURR);

 //    I = (float)(I_ADC) / 4095 * 3.3 * P_CHG_CURR * 2;
@ -289,20 +275,8 @@ float get_DSG_CURR(void)
    uint16_t I_ADC;

 //    I_ADC = Get_ConversionVal(get_adc(DSG_CURR));
-//    I_ADC = get_aftercalculationAdc(DSG_CURR);
-//    I_ADC = get_adc(DSG_CURR);
-
-
-    OutRingQueue2(&g_adcData.RQDSG_CURR, &I_ADC);
-    g_adcData.total_DSG_CURR -= I_ADC;
-
    I_ADC = get_aftercalculationAdc(DSG_CURR);
-    InRingQueue2(&g_adcData.RQDSG_CURR, I_ADC);
-    g_adcData.total_DSG_CURR += I_ADC;
-
-    I_ADC = g_adcData.total_DSG_CURR / (adcBuffSize - 1);
-
-
+//    I_ADC = get_adc(DSG_CURR);

 //    I = (float)(I_ADC) / 4095 * 3.3 * P_DSG_CURR * 2;
    I = (float)(I_ADC) / 4095 * 2.5 * P_DSG_CURR;
@ -440,19 +414,6 @@ float get_PV2_VOLT_IN(void)
    return V;
 }

-void currBuffInit(void)
-{
-    InitRingQueue2(&g_adcData.RQCHG_CURR, CHG_buff, adcBuffSize);
-    InitRingQueue2(&g_adcData.RQDSG_CURR, DSG_buff, adcBuffSize);
-
-    while (InRingQueue2(&g_adcData.RQCHG_CURR, 0) != -2);
-    while (InRingQueue2(&g_adcData.RQDSG_CURR, 0) != -2);
-
-    g_adcData.total_CHG_CURR = 0;
-    g_adcData.total_DSG_CURR = 0;
-
-    printf("%d \n", RingQueueLength2(&g_adcData.RQCHG_CURR));
-    printf("%d \n", RingQueueLength2(&g_adcData.RQDSG_CURR));
-}
+


--- a/App/src/inflash.c
+++ b/App/src/inflash.c
@ -11,25 +11,20 @@

 config_info g_slConfigInfo = {
        .constantCurrentV = 1000,
-        .constantVoltageV = 1420,
-        .floatI = 20,
+        .constantVoltageV = 1400,
+        .floatI = 5,
        .startSolarOpenCircuitV = 1700,
        .stopSolarOpenCircuitV = 1500,
        .constantVoltageChargeV = 1440,
        .trickleChargeC = 100,
-//        .FloatTime = 10,
-        .FloatV = 1420,
+        .FloatTime = 3,
        .checkSolarOpenCircuitVTime = 10,
        .registerRefreshTime = 1,
-        .loopImpedance = 20,
-//        .resRefreshTime = 1,
+        .resRefreshTime = 1,
        .sensorEnableBroadcastTime = 20,
        .HighSideMosTemperature_stop = 70,
        .HighSideMosTemperature_end = 50,
        .HighSideMosTemperature_start = 40,
-        .outputAgainFlagTime = 10,
-        .excessiveLoadFlagTime = 60,
-        .eLAgainTime = 3600,
 };


@ -38,9 +33,9 @@ config_info g_slConfigInfo = {
 * @param   save_config_info ÐèÒª±£´æµÄÅäÖÃÐÅÏ¢
 * @retval
 */
-void save_config_info(config_info *save_config_info)
+void save_config_info(config_info save_config_info)
 {
-    SPI_Flash_Write((uint8_t *)save_config_info, FLASH_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE);
+    SPI_Flash_Write((uint8_t *)&save_config_info, FLASH_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE);
 }


@ -73,39 +68,12 @@ uint8_t read_config_info(void)
        g_slConfigInfo.end_Flag = defaultValue.end_Flag;
    }

-    return 0;
-}

-/**
- * @brief   读取配置信息
- * @param   read_config_info1 读取的配置信息并保存在in_config_info中
- * @retval  0   flash中读取配置失败，使用默认配置
- *          1   flash中读取配置成功
- */
-uint8_t read_config_info1(config_info *in_config_info)
-{
-    config_info temp_config_info;
-    SPI_Flash_Read((uint8_t *)&temp_config_info, FLASH_SAVE_ADDR_BEGIN, CONFIG_INFO_SIZE);
-    if (temp_config_info.start_Flag[0] == 'S'
-            && temp_config_info.start_Flag[1] == 'L'
-            && temp_config_info.end_Flag == 0x16) {
-        *in_config_info = temp_config_info;
-        return 1;
-    } else {
-        in_config_info->start_Flag[0] = defaultValue.start_Flag[0];
-        in_config_info->start_Flag[1] = defaultValue.start_Flag[1];
-        in_config_info->address[0] = defaultValue.address[0];
-        in_config_info->address[1] = defaultValue.address[1];
-        in_config_info->address[2] = defaultValue.address[2];
-        in_config_info->address[3] = defaultValue.address[3];
-        in_config_info->address[4] = defaultValue.address[4];
-        in_config_info->address[5] = defaultValue.address[5];
-        in_config_info->address[6] = defaultValue.address[6];
-        in_config_info->end_Flag = defaultValue.end_Flag;
-    }

    return 0;
 }



+
+
--- a/App/src/mppt_control.c
+++ b/App/src/mppt_control.c
@ -23,7 +23,7 @@ static void FloatingCharge(void);


 /* 占空比 */
-float g_duty_ratio = 0.75;
+float g_duty_ratio = 0.8;
 /* 用于确定工作模式 */
 //static uint8_t modeFlag = 2;

@ -248,65 +248,7 @@ void mppt_constantVoltage(float InVoltage)
 }

 /**
-  * @brief  恒定输出电压(电池)
-  * @param
-  * @retval
-  *
-  */
-void mppt_constantVoltageB(float OutVoltage)
-{
-//    static uint8_t ConstantVoltageFlag = 1;
-//    float PV1_V = get_PV_VOLT_OUT();
-//
-//    if (ConstantVoltageFlag) {
-//        if (PV1_V > OutVoltage) {
-//            g_duty_ratio -= step1_pwm;
-//            Set_duty_ratio(&g_duty_ratio);
-//        } else {
-//            g_duty_ratio += step1_pwm;
-//            Set_duty_ratio(&g_duty_ratio);
-//        }
-//
-//        if (PV1_V - OutVoltage < 0.1) {
-//            ConstantVoltageFlag = 0;
-//        }
-//    } else {
-//        if (PV1_V > OutVoltage) {
-//            g_duty_ratio -= step2_pwm;
-//            Set_duty_ratio(&g_duty_ratio);
-//        } else {
-//            g_duty_ratio += step2_pwm;
-//            Set_duty_ratio(&g_duty_ratio);
-//        }
-//
-//        if (PV1_V - OutVoltage > 0.1) {
-//            ConstantVoltageFlag = 1;
-//        }
-//    }
-
-//    static float_t kp = 0.0005;
-//    static float_t ki = 0.000001;
-    static float_t kp = 0.005;
-    static float_t ki = 0.00001;
-//    static float_t kp = 0.1;
-//    static float_t ki = 0.001;
-
-//    float_t outVolt = get_PV_VOLT_OUT();
-    float_t outVolt = g_Mppt_Para.Battery_Voltage;
-//    float_t outVolt = voltOut;
-//    float_t error = outVolt - OutVoltage;
-    float_t error = OutVoltage - outVolt;
-    float_t stepPwm = kp * error + ki * outVolt;
-    g_duty_ratio += stepPwm;
-
-//    printf("setPwm : %d/10000 \n", (int)(stepPwm * 10000));
-
-    Set_duty_ratio(&g_duty_ratio);
-
-}
-
-/**
-  * @brief  恒定输出电压（输出检测端）
+  * @brief  ºã¶¨Êä³öµçÑ¹
  * @param
  * @retval
  *
@ -342,15 +284,13 @@ void mppt_constantVoltageO(float OutVoltage)
 //        }
 //    }

-//    static float_t kp = 0.0005;
-//    static float_t ki = 0.000001;
-    static float_t kp = 0.005;
-    static float_t ki = 0.00001;
+    static float_t kp = 0.0005;
+    static float_t ki = 0.000001;
 //    static float_t kp = 0.1;
 //    static float_t ki = 0.001;

 //    float_t outVolt = get_PV_VOLT_OUT();
-    float_t outVolt = g_Mppt_Para.Output_Voltage;
+    float_t outVolt = g_Mppt_Para.Battery_Voltage;
 //    float_t outVolt = voltOut;
 //    float_t error = outVolt - OutVoltage;
    float_t error = OutVoltage - outVolt;
@ -466,7 +406,7 @@ void TrickleCharge(void)
        TrickleChargeC = (float_t)g_slConfigInfo.trickleChargeC / 100;
        onlyOnce = 0;
    }
-//    printf("Trickle\n");
+    printf("Trickle\n");
    mppt_constantCurrentO(TrickleChargeC + g_Mppt_Para.Discharg_Current);
 }

@ -510,33 +450,22 @@ void ConstantVoltageCharge(void)
  */
 void FloatingCharge(void)
 {
-//    static uint32_t num = 0;
-//    static uint32_t numLenFlag;
-//    static uint8_t onlyOnce = 1;
-//    if (onlyOnce) {
-//        numLenFlag = g_slConfigInfo.FloatTime * 1000;
-//        onlyOnce = 0;
-//    }
-
-//    printf("float\n");
-//    TIM_SetCompare4(TIM4, 0);
-
-//    if (numLenFlag == ++num) {
-//        num = 0;
-//        for (int var = 0; var < 10; ++var) {
-//            ConstantVoltageCharge();
-//        }
-//        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
-//        printf("float\n");
-//    }
-
-    static float_t FloatChargeV;
+    static uint32_t num = 0;
+    static uint32_t numLenFlag;
    static uint8_t onlyOnce = 1;
    if (onlyOnce) {
-        FloatChargeV = (float_t)g_slConfigInfo.FloatV / 100;
+        numLenFlag = g_slConfigInfo.FloatTime * 1000;
        onlyOnce = 0;
    }
-    mppt_constantVoltageO(FloatChargeV);
+
+    printf("float\n");
+    TIM_SetCompare4(TIM4, 0);
+
+    if (numLenFlag == ++num) {
+        num = 0;
+        ConstantVoltageCharge();
+        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
+    }

 }

@ -624,7 +553,6 @@ void MpptMode(void)
        ConstantCurrentV = (float)g_slConfigInfo.constantCurrentV / 100;
        ConstantVoltageV = (float)g_slConfigInfo.constantVoltageV / 100;
        FloatI = (float)g_slConfigInfo.floatI / 100;
-        printf("FloatI: %d / 100 \n", (int)(FloatI * 100));
        StopSolarOpenCircuitV = (float)g_slConfigInfo.stopSolarOpenCircuitV / 100;
        only_once = 0;
    }
@ -705,20 +633,16 @@ void MpptMode(void)



-//    if (g_Mppt_Para.Input_Voltage < StopSolarOpenCircuitV
-//            && (g_Mppt_Para.Discharg_Current >= g_Mppt_Para.Charg_Current
-//                    || g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current < 0.05)) {
-    if ((g_Mppt_Para.Input_Voltage < StopSolarOpenCircuitV && g_Mppt_Para.Charg_Current < 0.05)
-            && g_Mppt_Para.MPPT_Mode != NoWork) {
+    if (g_Mppt_Para.Solar_Open_Circuit_Voltage < StopSolarOpenCircuitV
+            && (g_Mppt_Para.Discharg_Current >= g_Mppt_Para.Charg_Current
+                    || g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current < 0.05)) {
        g_Mppt_Para.MPPT_Mode = NoWork;
-//        printf("nowork \n");
        stop_mpptWork();
        TimeSliceOffset_Register(&m_startMpptControl, Task_startMpptControl
                , startMpptControl_reloadVal, startMpptControl_offset);
        return;
    }

-
 //    if (((g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current < 0.03
 //            && g_Mppt_Para.Discharg_Current - g_Mppt_Para.Charg_Current < 0.03)
 //            && (g_Mppt_Para.Battery_Voltage < ConstantVoltageV - 1
@ -738,15 +662,7 @@ void MpptMode(void)
            || g_Mppt_Para.Battery_Voltage > 16 || g_Mppt_Para.Battery_Voltage < 8) {
 //            || g_Mppt_Para.MPPT_Mode == NoBattery) {
 //        g_Mppt_Para.MPPT_Mode = NoBattery;
-//        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
-        g_Mppt_Para.MPPT_Mode = FLOAT;
-
-//        printf("Charg_Current : %d/100 \n", (int)(g_Mppt_Para.Charg_Current * 100));
-//        printf("Discharg_Current : %d/100 \n", (int)(g_Mppt_Para.Discharg_Current * 100));
-//        printf("Battery_Voltage : %d/100 \n", (int)(g_Mppt_Para.Battery_Voltage * 100));
-
-        g_batteryState = 0;
-
+        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
        return;
    }

@ -761,29 +677,20 @@ void MpptMode(void)
 //        return;
 //    }

-//    if (((ConstantVoltageV < g_Mppt_Para.Battery_Voltage)
-//            &&(FloatI + 0.1 <= g_Mppt_Para.Charg_Current))
-//            || (FloatI + 0.1 <= g_Mppt_Para.Discharg_Current)) {
-////            || (g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current < 0.03
-////               && g_Mppt_Para.Discharg_Current - g_Mppt_Para.Charg_Current < 0.03)) {
-//
-////        printf("mppt mode \n");
-////        printf(" vout : %d/100 \n", (int)(g_Mppt_Para.Battery_Voltage * 100));
-//        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
-//        return;
-//    }
-
-    if (((ConstantVoltageV < g_Mppt_Para.Battery_Voltage)
-            &&(FloatI + 0.1 <= g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current))) {
-        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
+    if (((ConstantVoltageV < g_Mppt_Para.Battery_Voltage) &&
+            (FloatI > g_Mppt_Para.Charg_Current))) {
+        g_Mppt_Para.MPPT_Mode = FLOAT;
        return;
    }

-    if ((((ConstantVoltageV < g_Mppt_Para.Battery_Voltage)
-            && (FloatI > g_Mppt_Para.Charg_Current))
-            && (FloatI > g_Mppt_Para.Discharg_Current))) {
-//            || g_Mppt_Para.MPPT_Mode == FLOAT) {
-        g_Mppt_Para.MPPT_Mode = FLOAT;
+    if (((ConstantVoltageV < g_Mppt_Para.Battery_Voltage)
+            &&(FloatI + 0.1 <= g_Mppt_Para.Charg_Current))) {
+//            || (g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current < 0.03
+//               && g_Mppt_Para.Discharg_Current - g_Mppt_Para.Charg_Current < 0.03)) {
+
+//        printf("mppt mode \n");
+//        printf(" vout : %d/100 \n", (int)(g_Mppt_Para.Battery_Voltage * 100));
+        g_Mppt_Para.MPPT_Mode = CONSTANTVOLTAGE;
        return;
    }

@ -792,6 +699,7 @@ void MpptMode(void)
        return;
    }

+
 }

 void findMiNDutyRatio(void)
@ -827,53 +735,27 @@ void test(void)

 //    mppt_constantCurrentO(1);

-
-//    if (g_interruptNum < 5) {
-//        g_interruptNum++;
-//        return;
-//    }
 //    g_Mppt_Para.Charg_Current = get_capturedata(get_CHG_CURR);
 //    g_Mppt_Para.Discharg_Current = get_capturedata(get_DSG_CURR);
 //    g_Mppt_Para.Output_Voltage = get_capturedata(get_PV_VOLT_OUT);
 //    g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage;
-
+    g_Mppt_Para.Charg_Current = get_CHG_CURR();
+    g_Mppt_Para.Discharg_Current = get_DSG_CURR();
    g_Mppt_Para.Output_Voltage = get_PV_VOLT_OUT();
    g_Mppt_Para.Input_Voltage  = get_PV1_VOLT_IN();
-
-//    mppt_constantVoltage(18);
-//    return;
-
-
-    if (g_Mppt_Para.Discharg_Current == 0 && g_Mppt_Para.Charg_Current == 0) {
-        return;
-    }
 //    g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage;

 //    static float_t Volt = 0.7;
 //    static float_t Curr = 5.5;
-//    static float_t loopImpedance;
-//    static uint8_t onlyone = 1;
-//    if (onlyone) {
-//        loopImpedance = (float_t)g_slConfigInfo.loopImpedance / 100;
-//    }
-
-
+    static float_t Res = 0.7 / 5.5;
    static float_t inBatteryCurr;
-    static float_t outBatteryCurr;
    inBatteryCurr = g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current;
-    outBatteryCurr = g_Mppt_Para.Discharg_Current - g_Mppt_Para.Charg_Current;
-    if (inBatteryCurr > 0.1) {
-        g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage - inBatteryCurr * g_impedance;
-    } else {
-        g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage;
+    if (inBatteryCurr > 0.5) {
+        g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage - inBatteryCurr * Res;
    }

-    if (g_batteryState == 0 && (inBatteryCurr > 0.1 || outBatteryCurr > 0.1) && g_Mppt_Para.Output_Voltage < 14.2) {
-//        printf("int g_batteryState : %d\n", g_batteryState);
-        g_batteryState = 1;
-//        TimeSliceOffset_Register(&m_impedanceCalculation, Task_impedanceCalculation
-//                , impedanceCalculation_reloadVal, impedanceCalculation_reloadVal);
-    }
+
+

 //    mppt_constantVoltage(18);

--- a/App/src/sl_protocol.c
+++ b/App/src/sl_protocol.c
@ -336,7 +336,6 @@ void SL_MsgProcFunc_Registration_request(device_handle device, void *pMsg, uint3
    recvbroadcast_flag = 1;
    RegistrationRequestFlag = 0;
    TimeSliceOffset_Unregister(&m_recvbroadcast);
-    m_recvbroadcast.runFlag = 0;
    SL_Mppt_RegistrationReply_pack *rpack = (SL_Mppt_RegistrationReply_pack *)pMsg;
    g_Mppt_Para.Registration_Status = chang_8_to_16(rpack->registration_Status_L, rpack->registration_Status_H);

--- a/App/src/task.c
+++ b/App/src/task.c
@ -24,13 +24,11 @@
 #include "collect_Conversion.h"


-//uint8_t g_interruptNum = 0;       /* 每次关闭或重新开启定时器3时，先清零该引脚 */
 void stop_mpptWork(void)
 {
 //    GPIO_WriteBit(EnPowerSupply_GPIO, EnPowerSupply_PIN, SET);
    g_duty_ratio = 0.7;
    TIM_Cmd(TIM3, DISABLE);
-//    g_interruptNum = 0;
    TIM_SetCompare4(TIM4, 0);
 //    TimeSliceOffset_Register(&m_startMpptControl, Task_startMpptControl
 //            , startMpptControl_reloadVal, startMpptControl_offset);
@ -41,13 +39,11 @@ void stop_mpptWork(void)
 void start_mpptWork(void)
 {
 //    GPIO_WriteBit(EnPowerSupply_GPIO, EnPowerSupply_PIN, RESET);
-//    g_interruptNum = 0;
    TIM_Cmd(TIM3, ENABLE);
-//    TIM3->CNT = 0;
    g_Mppt_Para.MPPT_Mode = CONSTANTCURRENT;
 //    TimeSliceOffset_Unregister(&m_startMpptControl);
 //    Delay_Ms(500);
-//    GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
+    GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
 }

 /**
@ -76,6 +72,7 @@ void Task_RunLED(void)
 //    printf(" 0.没有工作; 1.涓流模式; 2.恒流模式; 3.恒压模式; 4.浮充模式; 5.没有电池 : %d \n", g_Mppt_Para.MPPT_Mode);
 //
 //    printf(" \n");
+
 //    uart_sendstr(g_bat485_uart3_handle, " \n");

    uart_dev_write(g_bat485_uart3_handle, " \n", sizeof(" \n"));
@ -85,10 +82,6 @@ void Task_RunLED(void)
    sprintf(buffer, " duty_ratio : %d/1000 \n", (int)(g_duty_ratio * 1000));
    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));

-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " Input_Voltage : %d/100 \n", (int)(g_Mppt_Para.Input_Voltage * 100));
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
    memset(buffer, 0, sizeof(buffer));
    sprintf(buffer, " vout : %d/100 \n", (int)(g_Mppt_Para.Output_Voltage * 100));
    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
@ -109,38 +102,10 @@ void Task_RunLED(void)
    sprintf(buffer, " mosT : %d/10 \n",  (int)(g_Mppt_Para.HighSideMos_Temperature * 10));
    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));

-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " impedance : %d/1000 \n",  (int)(g_impedance * 1000));
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " g_impedanceStart : %d \n",  g_impedanceStart);
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
    memset(buffer, 0, sizeof(buffer));
    sprintf(buffer, " mosState : %d \n",  (int)(g_Mppt_Para.DischargMos_State));
    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));

-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " batteryState : %d \n",  g_batteryState);
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " outputAgainFlag : %d \n",  outputAgainFlag);
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " excessiveLoadFlag : %d \n",  excessiveLoadFlag);
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " inPower : %d \n",  (int)(g_Mppt_Para.inPower));
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
-    memset(buffer, 0, sizeof(buffer));
-    sprintf(buffer, " outPower : %d \n",  (int)(g_Mppt_Para.outPower));
-    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-
    memset(buffer, 0, sizeof(buffer));
    sprintf(buffer, " 0.没有工作; 1.涓流模式; 2.恒流模式; 3.恒压模式; 4.浮充模式; 5.没有电池 : %d \n",  g_Mppt_Para.MPPT_Mode);
    uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
@ -156,11 +121,10 @@ void Task_RunLED(void)
    flag = !flag;
    GPIO_WriteBit(RUN_LED_GPIO, RUN_LED_PIN, flag);

-
-    static uint8_t num = 0;
-    if (10 == ++num) {
-        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
-    }
+//    static uint8_t num = 0;
+//    if (10 == ++num) {
+//        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
+//    }

    return;
 }
@ -185,23 +149,16 @@ void Task_startMpptControl(void)
        checkSolarOpenCircuitVTimeFlag = 0;
        g_Mppt_Para.Solar_Open_Circuit_Voltage = get_PV1_VOLT_IN();
 //        printf("volt in : %d/100 \n", (int)(g_Mppt_Para.Solar_Open_Circuit_Voltage * 100));
-//        char buff[50];
-//        memset(buff, 0, sizeof(buff));
-//        sprintf(buff, "volt in : %d/100 \n",  (int)(g_Mppt_Para.Solar_Open_Circuit_Voltage * 100));
-//        uart_dev_write(g_bat485_uart3_handle, buff, sizeof(buff));
+        char buff[50];
+        memset(buff, 0, sizeof(buff));
+        sprintf(buff, "volt in : %d/100 \n",  (int)(g_Mppt_Para.Solar_Open_Circuit_Voltage * 100));
+        uart_dev_write(g_bat485_uart3_handle, buff, sizeof(buff));

        if (g_Mppt_Para.Solar_Open_Circuit_Voltage
             > ((float_t)g_slConfigInfo.startSolarOpenCircuitV / 100)) {
-            TimeSliceOffset_Unregister(&m_startMpptControl);
-            m_startMpptControl.runFlag = 0;
-//            printf("1\n");
 //            start_mpptWork();
-            if (g_Mppt_Para.Output_Voltage > 11) {
-                g_batteryState = 1;
-            } else {
-                g_batteryState = 0;
-            }
            TimeSliceOffset_Register(&m_softStart, Task_softStart, softStart_reloadVal, softStart_offset);
+            TimeSliceOffset_Unregister(&m_startMpptControl);
        }
    }
    return;
@ -229,44 +186,14 @@ void Task_softStart(void)
    }

    else if (num > 70 || dutyRatio > g_duty_ratio) {
+        dutyRatio = 0;
+        num = 0;
+        Set_duty_ratio(&g_duty_ratio);
        TimeSliceOffset_Unregister(&m_softStart);
-        m_softStart.runFlag = 0;
-
-        dutyRatio = 0;
-        num = 0;
-        Set_duty_ratio(&g_duty_ratio);
-
-        if (g_batteryState == 1) {
        start_mpptWork();
-//            GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
-//            TimeSliceOffset_Register(&m_impedanceCalculation, Task_impedanceCalculation
-//                    , impedanceCalculation_reloadVal, impedanceCalculation_reloadVal);
-            return;
-        } else {
-            dutyRatio = 0;
-            num = 0;
-            Set_duty_ratio(&g_duty_ratio);
-//            TimeSliceOffset_Unregister(&m_softStart);
-//            m_softStart.runFlag = 0;
-
-            //软起动后bms保护板开启电池充电
-            if (get_CHG_CURR() - get_DSG_CURR() > 0.1
-                    || get_DSG_CURR() - get_CHG_CURR() > 0.1) {
-//                printf("111\n");
-//                TimeSliceOffset_Register(&m_impedanceCalculation, Task_impedanceCalculation
-//                        , impedanceCalculation_reloadVal, impedanceCalculation_reloadVal);
-                start_mpptWork();
-//                GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
-                return;
-            }
-
-            g_Mppt_Para.MPPT_Mode = FLOAT;
-            TIM_Cmd(TIM3, ENABLE);
-//            GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);

        return;
    }
-    }

    else {
        dutyRatio += 0.01;
@ -324,36 +251,17 @@ void Task_refreshRegister(void)
 //        g_Mppt_Para.Charg_Current = get_capturedata(get_CHG_CURR);
 //        g_Mppt_Para.Discharg_Current = get_capturedata(get_DSG_CURR);
 //        g_Mppt_Para.HighSideMos_Temperature = get_capturedata(get_MOSFET_Temper);
-//        g_Mppt_Para.Battery_Voltage = get_PV_VOLT_OUT();
-        g_Mppt_Para.Output_Voltage = get_PV_VOLT_OUT();
+        g_Mppt_Para.Battery_Voltage = get_PV_VOLT_OUT();
        g_Mppt_Para.Charg_Current = get_CHG_CURR();
        g_Mppt_Para.Discharg_Current = get_DSG_CURR();
        g_Mppt_Para.HighSideMos_Temperature = get_MOSFET_Temper();
        g_Mppt_Para.DischargMos_State = GPIO_ReadOutputDataBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN)
                                                && GPIO_ReadInputDataBit(DSG_PROT_GPIO, DSG_PROT_PIN);
-
-        if (g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current < -0.1) {
-                g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage
-                        - (g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current) * g_impedance;
-        }
-
-        float_t inBatteryCurr = g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current;
-        float_t outBatteryCurr = g_Mppt_Para.Discharg_Current - g_Mppt_Para.Charg_Current;
-        if (g_batteryState == 0 && (inBatteryCurr > 0.1 || outBatteryCurr > 0.1) && g_Mppt_Para.Output_Voltage < 14.2) {
-             g_batteryState = 1;
-         }
-
-        /* 有电池，太阳能输出功率大，同时回路阻抗未测试或需要重新测试 */
-        if (g_batteryState == 1 && (g_Mppt_Para.Charg_Current > 3.0) && (g_impedanceStart == 1 || g_impedance == 0.0)) {
-            TimeSliceOffset_Register(&m_impedanceCalculation, Task_impedanceCalculation
-                    , impedanceCalculation_reloadVal, impedanceCalculation_reloadVal);
-        }
-
 //        g_Mppt_Para.DischargMos_State = GPIO_ReadOutputDataBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN);
 //        g_Mppt_Para.Solar_Open_Circuit_Voltage = get_capturedata(get_PV1_VOLT_IN);
-        g_Mppt_Para.Input_Voltage = get_PV1_VOLT_IN();
+        g_Mppt_Para.Solar_Open_Circuit_Voltage = get_PV1_VOLT_IN();

-        if (g_Mppt_Para.HighSideMos_Temperature < g_slConfigInfo.HighSideMosTemperature_start + 3) {
+        if (g_Mppt_Para.HighSideMos_Temperature < g_slConfigInfo.HighSideMosTemperature_start) {
            if (overTemperature == 2) {
 //                start_mpptWork();
                TimeSliceOffset_Register(&m_softStart, Task_softStart, softStart_reloadVal, softStart_offset);
@ -362,19 +270,18 @@ void Task_refreshRegister(void)
            return;
        }

-        if (g_Mppt_Para.HighSideMos_Temperature > g_slConfigInfo.HighSideMosTemperature_end + 3
-                && g_Mppt_Para.HighSideMos_Temperature < g_slConfigInfo.HighSideMosTemperature_stop) {
+        if (g_Mppt_Para.HighSideMos_Temperature > g_slConfigInfo.HighSideMosTemperature_end) {
 //            g_Mppt_Para.MPPT_Mode = NoBattery;
-//            g_duty_ratio -= 0.1;
-            g_duty_ratio = 0.6;
+            g_duty_ratio = 0.5;
            Set_duty_ratio(&g_duty_ratio);
            overTemperature = 1;
        }

-        if (g_Mppt_Para.HighSideMos_Temperature > g_slConfigInfo.HighSideMosTemperature_stop  + 3) {
+        if (g_Mppt_Para.HighSideMos_Temperature > g_slConfigInfo.HighSideMosTemperature_stop) {
            overTemperature = 2;
            stop_mpptWork();
        }
+
    }
 }

@ -395,7 +302,6 @@ void Task_recvbroadcast(void)
        RegistrationRequestFlag = 0;
        run_number = 0;
        TimeSliceOffset_Unregister(&m_recvbroadcast);
-        m_recvbroadcast.runFlag = 0;
        return;
    }
 //    if (g_Mppt_Para.Registration_Status == REGISTER_SUCCESS) {
@ -478,9 +384,7 @@ void Task_recvbroadcast(void)
  */
 STR_TimeSliceOffset m_impedanceCalculation;
 float_t g_impedance = 0;            /* 回路阻抗的值 */
-uint8_t g_batteryState = 0;         /* 有无电池 */
-uint8_t g_impedanceStart = 0;       /* 是否开始测量回路阻抗 */
-//config_info tempConfigInfo;
+float_t voltOut = 0;                /* 输出电压的值 */
 void Task_impedanceCalculation(void)
 {
    static uint8_t num = 0;
@ -488,121 +392,46 @@ void Task_impedanceCalculation(void)
    static float_t voltOne = 0;
    static float_t currTwo = 0;
    static float_t voltTwo = 0;
-//    static uint8_t only_one = 1;
-//    if (only_one) {
-//        g_impedance = g_slConfigInfo.loopImpedance;
-//    }

-//    if (g_Mppt_Para.MPPT_Mode == CONSTANTCURRENT
-//            || g_Mppt_Para.MPPT_Mode == CONSTANTVOLTAGE) {
-//        ++num;
-//    } else {
-//        num = 0;
-//    }
-//
-//    if (num == 10) {
-//        num = 0;
-//        TIM_Cmd(TIM3, DISABLE);
-//
-//        TIM_SetCompare4(TIM4, 300);
-//        Delay_Ms(500);
-//
-//        TIM_SetCompare4(TIM4, 420);
-//        Delay_Ms(5);
-////        currOne = get_capturedata(get_CHG_CURR) - get_capturedata(get_DSG_CURR);
-////        voltOne = get_capturedata(get_PV_VOLT_OUT);
-//        currOne = get_CHG_CURR() - get_DSG_CURR();
-//        voltOne = get_PV_VOLT_OUT();
-//
-////        currTwo = get_capturedata(get_CHG_CURR) - get_capturedata(get_DSG_CURR);
-////        voltTwo = get_capturedata(get_PV_VOLT_OUT);
-//        currTwo = get_CHG_CURR() - get_DSG_CURR();
-//        voltTwo = get_PV_VOLT_OUT();
-//
-//        g_impedance = (voltOne - voltTwo) / (currOne - currTwo);
-//
-//        printf("currOne = %d/1000, voltOne = %d/100 \n", (int)(currOne * 1000), (int)(voltOne * 100));
-//        printf("currTwo = %d/1000, voltTwo = %d/100 \n", (int)(currTwo * 1000), (int)(voltTwo * 100));
-//        printf("Res = %d/1000, E = %d/100 \n", (int)(g_impedance * 1000), (int)((voltTwo - currTwo * g_impedance) * 100));
-//
-////        TIM_Cmd(TIM3, ENABLE);
-//    }
-
-    num++;
-
-//    printf("g_batteryState : %d\n", g_batteryState);
-
-    if (num == 1) {
-        TIM_Cmd(TIM3, DISABLE);
-//        g_interruptNum = 0;
-        TIM_SetCompare4(TIM4, 300);
-        return;
+    if (g_Mppt_Para.MPPT_Mode == CONSTANTCURRENT
+            || g_Mppt_Para.MPPT_Mode == CONSTANTVOLTAGE) {
+        ++num;
+    } else {
+        num = 0;
    }

-    if (num == 11) {
+    if (num == 10) {
+        num = 0;
+        TIM_Cmd(TIM3, DISABLE);
+
+        TIM_SetCompare4(TIM4, 420);
+        Delay_Ms(5);
+//        currOne = get_capturedata(get_CHG_CURR) - get_capturedata(get_DSG_CURR);
+//        voltOne = get_capturedata(get_PV_VOLT_OUT);
        currOne = get_CHG_CURR() - get_DSG_CURR();
        voltOne = get_PV_VOLT_OUT();
-        TIM_SetCompare4(TIM4, 420);
-        return;
-    }
-
-    if (num == 21) {
-        TimeSliceOffset_Unregister(&m_impedanceCalculation);
-        m_impedanceCalculation.runFlag = 0;

+        TIM_SetCompare4(TIM4, 300);
+        Delay_Ms(5);
+//        currTwo = get_capturedata(get_CHG_CURR) - get_capturedata(get_DSG_CURR);
+//        voltTwo = get_capturedata(get_PV_VOLT_OUT);
        currTwo = get_CHG_CURR() - get_DSG_CURR();
        voltTwo = get_PV_VOLT_OUT();
+
        g_impedance = (voltOne - voltTwo) / (currOne - currTwo);

-//        printf("g_batteryState : %d\n", g_batteryState);
+        printf("currOne = %d/1000, voltOne = %d/100 \n", (int)(currOne * 1000), (int)(voltOne * 100));
+        printf("currTwo = %d/1000, voltTwo = %d/100 \n", (int)(currTwo * 1000), (int)(voltTwo * 100));
+        printf("Res = %d/1000, E = %d/100 \n", (int)(g_impedance * 1000), (int)((voltTwo - currTwo * g_impedance) * 100));

-//        printf("currOne = %d/1000, voltOne = %d/100 \n", (int)(currOne * 1000), (int)(voltOne * 100));
-//        printf("currTwo = %d/1000, voltTwo = %d/100 \n", (int)(currTwo * 1000), (int)(voltTwo * 100));
-//        printf("Res = %d/1000, E = %d/100 \n", (int)(g_impedance * 1000), (int)((voltTwo - currTwo * g_impedance) * 100));
-
-        /* 判断回路阻抗是否合理 */
-        if (g_impedance > 1.0 || g_impedance < 0.05) {
-            g_impedance = 0;
-            num = 0;
-            start_mpptWork();
-            return;
-        }
-
-        /* 将回路阻抗的值放入flash中 */
-        config_info tempConfigInfo;
-        if (read_config_info1(&tempConfigInfo)) {
-            tempConfigInfo.loopImpedance = (uint16_t)(g_impedance * 1000);
-            save_config_info(&tempConfigInfo);
-        } else {
-            tempConfigInfo = g_slConfigInfo;
-            tempConfigInfo.loopImpedance = (uint16_t)(g_impedance * 1000);
-            save_config_info(&tempConfigInfo);
-        }
-
-//        uart_dev_write(g_bat485_uart3_handle, "\n\n\n\n\n", sizeof("\n\n\n\n\n"));
-//        char buffer[80];
-//        memset(buffer, 0, sizeof(buffer));
-//        sprintf(buffer, " tempConfigInfo.loopImpedance : %d/1000 \n", tempConfigInfo.loopImpedance);
-//        uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-//        memset(buffer, 0, sizeof(buffer));
-//        config_info tempConfigInfo2 = {0};
-//        read_config_info1(&tempConfigInfo2);
-//        sprintf(buffer, " tempConfigInfo2.loopImpedance : %d/1000 \n", tempConfigInfo2.loopImpedance);
-//        uart_dev_write(g_bat485_uart3_handle, buffer, sizeof(buffer));
-//        uart_dev_write(g_bat485_uart3_handle, "\n\n\n\n\n", sizeof("\n\n\n\n\n"));
-
-        g_impedanceStart = 0;
-        num = 0;
-        start_mpptWork();
-//        TIM_Cmd(TIM3, ENABLE);
-        return;
+        TIM_Cmd(TIM3, ENABLE);
    }

    return;
 }

 /**
-  * @brief 延时一段时间后检测是否仍然短路
+  * @brief 再次打开放电端口，避免上电引起的异常波动
  * @param
  * @retval
  */
@ -610,94 +439,14 @@ STR_TimeSliceOffset m_outputAgain;
 uint8_t outputAgainFlag = 0;
 void Task_outputAgain(void)
 {
-    static uint8_t num = 0;
-    num++;

-//    if (outputAgainFlag == 1) {
-////        outputAgainFlag = 0;
-//        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, RESET);
-//        TimeSliceOffset_Unregister(&m_outputAgain);
-//        m_outputAgain.runFlag = 0;
-//        num = 0;
-//    }
-
-//    printf(" in POW_OUT_CON\n");
-    if (num == g_slConfigInfo.outputAgainFlagTime) {
-        num = 0;
+    if (outputAgainFlag == 1) {
        outputAgainFlag = 0;
        TimeSliceOffset_Unregister(&m_outputAgain);
-        m_outputAgain.runFlag = 0;
-//        printf(" in POW_OUT_CON control %d \n", GPIO_ReadInputDataBit(DSG_PROT_GPIO, DSG_PROT_PIN));
-        if (!(GPIO_ReadInputDataBit(DSG_PROT_GPIO, DSG_PROT_PIN))) {
-//            uart_dev_write(g_bat485_uart3_handle, " \n\n\n\n\n", sizeof(" \n\n\n\n\n"));
-//            uart_dev_write(g_bat485_uart3_handle, " in task pow_out_con reset", sizeof(" in task pow_out_con reset"));
-//            uart_dev_write(g_bat485_uart3_handle, " \n\n\n\n\n", sizeof(" \n\n\n\n\n"));
-//            printf(" in POW_OUT_CON RESET \n");
-            GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, RESET);
-        }
    }

-    return;
-}
-
-/**
-  * @brief 过载后开始延时，这段时间内再次过载则关闭输出
-  * @param
-  * @retval
-  */
-STR_TimeSliceOffset m_excessiveLoad;
-uint8_t excessiveLoadFlag = 0;
-void Task_excessiveLoad(void)
-{
-    static uint8_t num = 0;
-    static uint16_t numLong = 0;
-
-//    if (outputAgainFlag == 1) {
-////        outputAgainFlag = 0;
-//        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, RESET);
-//        TimeSliceOffset_Unregister(&m_outputAgain);
-//        m_outputAgain.runFlag = 0;
-//        num = 0;
-//    }
-
-//    printf(" in POW_OUT_CON\n");
-    if (outputAgainFlag == 1) {
-        num = 0;
-        numLong = 0;
-        excessiveLoadFlag = 0;
-        TimeSliceOffset_Unregister(&m_excessiveLoad);
-        m_excessiveLoad.runFlag = 0;
-    }
-
-    if (excessiveLoadFlag == 1) {
-        num++;
-    }
-
-    if (num == g_slConfigInfo.excessiveLoadFlagTime) {
-        num = 0;
-        excessiveLoadFlag = 0;
-        TimeSliceOffset_Unregister(&m_excessiveLoad);
-        m_excessiveLoad.runFlag = 0;
-        return;
-    }
-
-
-
-    if (excessiveLoadFlag >= 2) {
-        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, RESET);
-        num = 0;
-    }
-
-    if (!(GPIO_ReadOutputDataBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN))) {
-        numLong++;
-    }
-
-    if (numLong == g_slConfigInfo.eLAgainTime) {
-        numLong = 0;
-        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
-        excessiveLoadFlag = 0;
-        TimeSliceOffset_Unregister(&m_excessiveLoad);
-        m_excessiveLoad.runFlag = 0;
+    if (outputAgainFlag == 2) {
+        TimeSliceOffset_Unregister(&m_outputAgain);
    }

    return;
@ -721,7 +470,6 @@ void Task_sensorEnableBroadcast(void)
        enabBroadcastTimeFlag = 0;
        run_Broadcast = 1;
        TimeSliceOffset_Unregister(&m_sensorEnableBroadcast);
-        m_sensorEnableBroadcast.runFlag = 0;
    }
    return;
 }
@ -733,8 +481,6 @@ void Task_sensorEnableBroadcast(void)
  */
 void g_Mppt_Para_Init(void)
 {
-    g_impedance = (float_t)g_slConfigInfo.loopImpedance / 1000;
-
    g_Mppt_Para.Registration_Status = UNREGISTER;
    g_Mppt_Para.address[0] = g_slConfigInfo.address[0];
    g_Mppt_Para.address[1] = g_slConfigInfo.address[1];
@ -754,17 +500,14 @@ void g_Mppt_Para_Init(void)
 //    g_Mppt_Para.HighSideMos_Temperature = get_capturedata(get_MOSFET_Temper);    g_Mppt_Para.Output_Voltage = get_capturedata(get_PV_VOLT_OUT);

    g_Mppt_Para.Output_Voltage = get_PV_VOLT_OUT();
-//    g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage;
+    g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage;
    g_Mppt_Para.Charg_Current = get_CHG_CURR();
    g_Mppt_Para.Discharg_Current = get_DSG_CURR();
-    g_Mppt_Para.Battery_Voltage = g_Mppt_Para.Output_Voltage
-            - (g_Mppt_Para.Charg_Current - g_Mppt_Para.Discharg_Current) * g_impedance;
    g_Mppt_Para.Solar_Open_Circuit_Voltage = get_PV1_VOLT_IN();
    g_Mppt_Para.HighSideMos_Temperature = get_MOSFET_Temper();

-    if (g_Mppt_Para.Battery_Voltage < 15 || g_Mppt_Para.Battery_Voltage > 11) {
-//        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
-        g_impedanceStart = 1;
+    if (g_Mppt_Para.Battery_Voltage < 1 || g_Mppt_Para.Battery_Voltage > 9) {
+        GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, SET);
    }
    g_Mppt_Para.DischargMos_State = GPIO_ReadOutputDataBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN)
                                            && GPIO_ReadInputDataBit(DSG_PROT_GPIO, DSG_PROT_PIN);
@ -816,26 +559,20 @@ void task_Init(void)
  */
 void hardware_Init(void)
 {
+    TIM2_Init(1);
    uart_dev_init();
    PWM_TIM_Configuration();
-//    TIM_SetCompare4(TIM4, 0);
    ADC_all_Init();
    RUN_LED_Init();
    WDI_INPUT_Init();
    SPI_Flash_Init();
    POW_OUT_CON_Init();
    DSG_PROT_Init();
-    WORK_VOLT_INT_Init();
 //    EnPowerSupply_Init();

 //    Set_duty_ratio(&g_duty_ratio);

-//    uart_dev_write(g_bat485_uart3_handle, " hello world \n", sizeof(" hello world \n"));
-
+    uart_dev_write(g_bat485_uart3_handle, " hello world \n", sizeof(" hello world \n"));
    TIM3_Init(1);
-//    TIM_Cmd(TIM3, ENABLE); //TIM3使能
-
-    currBuffInit();
-    TIM2_Init(1);
 }

--- a/Drivers/RingQueue2/ring_queue2.c
+++ b/Drivers/RingQueue2/ring_queue2.c
@ -1,91 +0,0 @@
-/*
- * ring_queue.c
- *
- *  Created on: 2024年6月21日
- *      Author: psx
- */
-
-
-//循环队列
-#include <stdio.h>
-#include <stdlib.h>
-#include "ring_queue2.h"
-
-//#define RING_QUEUE_DEBUG
-
-//#ifdef RING_QUEUE_DEBUG
-//#define //rq_debug term_printf
-//#else
-//void rq_debug(const char *fmt, ...){};
-//#endif
-
-#define RQ_OK 1
-#define RQ_ERROR 0
-#define RQ_OVERFLOW -2
-
-//初始化队列
-int InitRingQueue2(RingQueue2 *q, RQ_ElementType2 *buff, int size)
-{
-    q->elems = buff;
-    q->size = size;
-    q->front=q->rear=0;
-    return RQ_OK;
-}
-
-//遍历队列,
-//消费者使用，故对生产者可能修改的rear先读取缓存
-int ShowRingQueue2(RingQueue2 *q)
-{
-    //int i;
-    int rear = q->rear;
-
-    if(q->front == rear)
-    {
-        //rq_debug("队列为空\n");
-        return RQ_ERROR;
-    }
-    //rq_debug("队列中的元素为:\n");
-    //for(i=((q->front)%q->size); i !=  rear; i=((i+1)%q->size))
-        //rq_debug(" %c\n",q->elems[i]);
-
-    //rq_debug("\n");
-    //rq_debug("队首元素为%c\n",q->elems[q->front]);
-    //rq_debug("队尾元素为%c\n",q->elems[rear - 1]);
-    return RQ_OK;
-}
-
-//向队尾插入元素e
-int InRingQueue2(RingQueue2 *q,RQ_ElementType2 e)
-{
-    if(RingQueueFull2(q))
-    {
-        //rq_debug("空间不足\n");
-        return(RQ_OVERFLOW);
-    }
-    q->elems[q->rear] = e;
-    q->rear = (q->rear+1) % q->size;
-    //rq_debug("rear = %d\n",q->rear);
-    return RQ_OK;
-}
-
-//从队首取回并删除元素
-int OutRingQueue2(RingQueue2 *q, RQ_ElementType2 *e)
-{
-    if(RingQueueEmpty2(q))
-    {
-        //rq_debug("队列为空\n");
-        return RQ_ERROR;
-    }
-        *e = q->elems[q->front];
-    //rq_debug("被删除的队首元素为%c\n",q->elems[q->front]);
-    q->front = (q->front+1) % q->size;
-    return RQ_OK;
-}
-
-//队列中的元素个数
-int RingQueueLength2(RingQueue2 *q)
-{
-    return ((q->rear - q->front) + q->size) % q->size;
-}
-
-
--- a/Drivers/RingQueue2/ring_queue2.h
+++ b/Drivers/RingQueue2/ring_queue2.h
@ -1,44 +0,0 @@
-/*
- * ring_queue.h
- *
- *  Created on: 2024年6月21日
- *      Author: psx
- */
-
-#ifndef DRIVERS_RINGQUEUE_RING_QUEUE2_H_
-#define DRIVERS_RINGQUEUE_RING_QUEUE2_H_
-
-
-//#define RING_QUEUE_DEBUG //定义本宏会打印RingQueue的调试信息
-
-//typedef unsigned char RQ_ElementType2;//元素类型
-typedef uint16_t RQ_ElementType2;//元素类型
-
-typedef struct _ring_queue2
-{
-    RQ_ElementType2 *elems;
-    int size;
-    volatile int front, rear;
-}RingQueue2;
-
-//初始化队列,需传入保存队列状态的结构q，队列使用的buffer和buffer大小
-int InitRingQueue2(RingQueue2 *q, RQ_ElementType2 *buff, int size);
-
-#define RingQueueFull2(q) (((q)->rear+1) % (q)->size == (q)->front)
-#define RingQueueEmpty2(q) ((q)->front == (q)->rear)
-
-//遍历队列,
-//消费者使用，故对生产者可能修改的rear先读取缓存
-int ShowRingQueue2(RingQueue2 *q);
-
-//向队尾插入元素e
-int InRingQueue2(RingQueue2 *q,RQ_ElementType2 e);
-
-//从队首删除元素
-int OutRingQueue2(RingQueue2 *q, RQ_ElementType2 *e);
-
-//队列中的元素个数
-int RingQueueLength2(RingQueue2 *q);
-
-
-#endif /* DRIVERS_RINGQUEUE_RING_QUEUE_H_ */
--- a/Hardware/inc/gpio.h
+++ b/Hardware/inc/gpio.h
@ -66,10 +66,4 @@ void DSG_PROT_Init(void);
 #define EnPowerSupply_PIN GPIO_Pin_3
 void EnPowerSupply_Init(void);

-/* 电压低于11V进入中断 */
-/* WORK_VOLT_INT  -->  PA12 */
-#define WORK_VOLT_INT_GPIO GPIOA
-#define WORK_VOLT_INT_PIN GPIO_Pin_12
-void WORK_VOLT_INT_Init(void);
-
 #endif /* HARDWARE_INC_GPIO_H_ */
--- a/Hardware/src/adc.c
+++ b/Hardware/src/adc.c
@ -13,7 +13,7 @@ void ADC_all_Init(void)
    RCC_PB2PeriphClockCmd(RCC_PB2Periph_ADC1, ENABLE);
    RCC_ADCCLKConfig(RCC_PCLK2_Div2);

-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6; //PA1~7对应ADC通道1~7
+    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7; //PA1~7对应ADC通道1~7
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
    GPIO_Init(GPIOA, &GPIO_InitStructure);

--- a/Hardware/src/gpio.c
+++ b/Hardware/src/gpio.c
@ -100,23 +100,22 @@ void DSG_PROT_Init(void)
 void EXTI2_IRQHandler(void)
 {
    if(EXTI_GetITStatus(EXTI_Line2)==SET) { //EXTI_GetITStatus用来获取中断标志位状态，如果EXTI线产生中断则返回SET，否则返回RESET
-//        GPIO_WriteBit(DSG_PROT_GPIO, DSG_PROT_PIN, RESET);
-        EXTI_ClearITPendingBit(EXTI_Line2);  //清除中断标志位
-//        printf("Run at EXTI 111\r\n");
+//        printf("Run at EXTI\r\n");
+        GPIO_WriteBit(DSG_PROT_GPIO, DSG_PROT_PIN, RESET);
        if (outputAgainFlag == 0) {
+            Delay_Ms(1);
+            GPIO_WriteBit(DSG_PROT_GPIO, DSG_PROT_PIN, SET);
+//            TimeSliceOffset_Register(&m_outputAgain, Task_outputAgain
+//                    , outputAgain_reloadVal, outputAgain_offset);
            outputAgainFlag = 1;
-            TimeSliceOffset_Register(&m_outputAgain, Task_outputAgain
-                    , outputAgain_reloadVal, outputAgain_offset);
-//            m_outputAgain.runFlag = 1;
-            return;
        }

-//        if (outputAgainFlag == 1) {
+        if (outputAgainFlag == 1) {
 //            GPIO_WriteBit(POW_OUT_CON_GPIO, POW_OUT_CON_PIN, RESET);
-//            EXTI_ClearITPendingBit(EXTI_Line2);  //清除中断标志位
-//            return;
-//        }
+            outputAgainFlag = 2;
+        }

+        EXTI_ClearITPendingBit(EXTI_Line2);  //清除中断标志位
    }
 }

@ -133,49 +132,5 @@ void EnPowerSupply_Init(void)
    GPIO_WriteBit(EnPowerSupply_GPIO, EnPowerSupply_PIN, RESET);
 }

-void EXTI15_10_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
-
-void WORK_VOLT_INT_Init(void)
-{
-    RCC_PB2PeriphClockCmd(RCC_PB2Periph_AFIO | RCC_PB2Periph_GPIOA, ENABLE);
-    GPIO_InitTypeDef GPIO_InitStructure;
-    GPIO_InitStructure.GPIO_Pin = WORK_VOLT_INT_PIN;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;      //下拉输入
-    GPIO_Init(WORK_VOLT_INT_GPIO, &GPIO_InitStructure);
-
-    /* GPIOA ----> EXTI_Line12 */
-    EXTI_InitTypeDef EXTI_InitStructure;
-    GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource12);//指定中断/事件线的输入源，实际上是设定外部中断配置寄存器AFIO_EXTICRx的值，此处为PA12
-    EXTI_InitStructure.EXTI_Line = EXTI_Line12;                  //EXTI中断/事件线选择，此处选择EXTI_Line12
-    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;         //EXTI模式选择，此处选择为产生中断模式
-    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;      //EXTI边沿触发事件，此处选择为上升沿触发
-    EXTI_InitStructure.EXTI_LineCmd = ENABLE;                   //使能EXTI线
-    EXTI_Init(&EXTI_InitStructure);
-
-    NVIC_InitTypeDef NVIC_InitStructure;
-    NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;       //使能EXTI12中断通道
-    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;  //设置抢占优先级为1
-    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;         //设置子优先级为2
-    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;            //使能外部中断通道
-    NVIC_Init(&NVIC_InitStructure);                            //中断优先级分组初始化
-}
-
-void EXTI15_10_IRQHandler(void)
-{
-    if(EXTI_GetITStatus(EXTI_Line12)==SET) { //EXTI_GetITStatus用来获取中断标志位状态，如果EXTI线产生中断则返回SET，否则返回RESET
-//        printf(" vout low 11V \n");
-        EXTI_ClearITPendingBit(EXTI_Line12);  //清除中断标志位
-        excessiveLoadFlag++;
-        TimeSliceOffset_Register(&m_excessiveLoad, Task_excessiveLoad
-                , excessiveLoad_reloadVal, excessiveLoad_offset);


-//        uart_dev_write(g_bat485_uart3_handle, "\n\n\n\n\n in vout low 8V (Set)\n\n\n\n\n", sizeof("\n\n\n\n\n in vout low 8V (Set)\n\n\n\n\n"));
-    }
-//    uart_dev_write(g_bat485_uart3_handle, "\n\n\n\n\n in vout low 8V\n\n\n\n\n", sizeof("\n\n\n\n\n in vout low 8V\n\n\n\n\n"));
-//    if(EXTI_GetITStatus(EXTI_Line12)==SET) { //EXTI_GetITStatus用来获取中断标志位状态，如果EXTI线产生中断则返回SET，否则返回RESET
-////        printf(" vout low 11V \n");
-//        uart_dev_write(g_bat485_uart3_handle, "\n\n\n\n\n in vout low 8V\n\n\n\n\n", sizeof("\n\n\n\n\n in vout low 8V\n\n\n\n\n"));
-//    }
-}
-
--- a/Hardware/src/pwm.c
+++ b/Hardware/src/pwm.c
@ -52,8 +52,8 @@ void PWM_TIM_Configuration(void)

 void Set_duty_ratio(float *duty_ratio)
 {
-    if (*duty_ratio < 0.05) {
-        *duty_ratio = 0.05;
+    if (*duty_ratio < 0.1) {
+        *duty_ratio = 0.1;
 //        return;
    } else if (*duty_ratio > 0.9) {
        *duty_ratio = 0.9;
--- a/Hardware/src/tim.c
+++ b/Hardware/src/tim.c
@ -10,8 +10,6 @@
 #include "pwm.h"
 #include "mppt_control.h"
 #include "task.h"
-#include "collect_Conversion.h"
-#include "sl_protocol.h"

 void TIM3_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
 void TIM2_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
@ -43,7 +41,6 @@ void TIM3_Int_Init(uint16_t arr, uint16_t psc)
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; //TIM计数模式，向上计数模式
    TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure); //根据指定的参数初始化TIMx的时间基数单位

-    TIM_ClearITPendingBit(TIM3, TIM_IT_Update);    //Çå³ýTIM3µÄÖÐ¶Ï¹ÒÆðÎ»¡£
    TIM_ITConfig(TIM3, TIM_IT_Update, ENABLE ); //使能TIM3中断，允许更新中断

    //初始化TIM NVIC，设置中断优先级分组
@ -60,7 +57,6 @@ void TIM3_IRQHandler(void)
 {
    if (TIM_GetITStatus(TIM3, TIM_IT_Update) != RESET) { //检查TIM3中断是否发生。
        TIM_ClearITPendingBit(TIM3, TIM_IT_Update);    //清除TIM3的中断挂起位。
-//        uart_dev_write(g_bat485_uart3_handle, "\n\n\n\n\nin tim3 irt\n\n\n\n\n", sizeof("\n\n\n\n\nin tim3 irt\n\n\n\n\n"));
        test();
    }
 }
@ -105,12 +101,9 @@ void TIM2_IRQHandler(void)
    if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET) {    //检查TIM2中断是否发生。
        TIM_ClearITPendingBit(TIM2, TIM_IT_Update);         //清除TIM1的中断挂起位。
        TimeSliceOffset_Produce();
-
-        g_Mppt_Para.Charg_Current = get_CHG_CURR();
-        g_Mppt_Para.Discharg_Current = get_DSG_CURR();
-
-        g_Mppt_Para.inPower  += g_Mppt_Para.Charg_Current * g_Mppt_Para.Output_Voltage;
-        g_Mppt_Para.outPower += g_Mppt_Para.Discharg_Current * g_Mppt_Para.Output_Voltage;
+        if (outputAgainFlag == 1) {
+            outputAgainFlag = 0;
+        }
    }
 }

--- a/obj/App/src/collect_Conversion.d
+++ b/obj/App/src/collect_Conversion.d
@ -26,9 +26,8 @@ App/src/collect_Conversion.o: ../App/src/collect_Conversion.c \
 D:\psx\MPPT\git\Peripheral\inc/ch32l103_misc.h \
 D:\psx\MPPT\git\Peripheral\inc/ch32l103_lptim.h \
 D:\psx\MPPT\git\Peripheral\inc/ch32l103_opa.h \
- D:\psx\MPPT\git\Hardware\inc/adc.h \
- D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h \
- D:\psx\MPPT\git\Hardware\inc/gpio.h D:\psx\MPPT\git\App\inc/uart_dev.h \
+ D:\psx\MPPT\git\Hardware\inc/adc.h D:\psx\MPPT\git\Hardware\inc/gpio.h \
+ D:\psx\MPPT\git\App\inc/uart_dev.h \
 D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h \
 D:\psx\MPPT\git\Hardware\inc/rs485.h

@ -92,8 +91,6 @@ D:\psx\MPPT\git\Peripheral\inc/ch32l103_opa.h:

 D:\psx\MPPT\git\Hardware\inc/adc.h:

-D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h:
-
 D:\psx\MPPT\git\Hardware\inc/gpio.h:

 D:\psx\MPPT\git\App\inc/uart_dev.h:
--- a/obj/App/src/collect_Conversion.o
+++ b/obj/App/src/collect_Conversion.o
--- a/obj/App/src/inflash.o
+++ b/obj/App/src/inflash.o
--- a/obj/App/src/mppt_control.d
+++ b/obj/App/src/mppt_control.d
@ -27,10 +27,8 @@ App/src/mppt_control.o: ../App/src/mppt_control.c \
 D:\psx\MPPT\git\Peripheral\inc/ch32l103_lptim.h \
 D:\psx\MPPT\git\Peripheral\inc/ch32l103_opa.h \
 D:\psx\MPPT\git\App\inc/collect_Conversion.h \
- D:\psx\MPPT\git\Hardware\inc/adc.h \
- D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h \
- D:\psx\MPPT\git\Hardware\inc/pwm.h D:\psx\MPPT\git\App\inc/inflash.h \
- D:\psx\MPPT\git\Hardware\inc/gpio.h \
+ D:\psx\MPPT\git\Hardware\inc/adc.h D:\psx\MPPT\git\Hardware\inc/pwm.h \
+ D:\psx\MPPT\git\App\inc/inflash.h D:\psx\MPPT\git\Hardware\inc/gpio.h \
 D:\psx\MPPT\git\App\inc/sl_protocol.h D:\psx\MPPT\git\App\inc/uart_dev.h \
 D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h \
 D:\psx\MPPT\git\Hardware\inc/rs485.h D:\psx\MPPT\git\App\inc/task.h \
@ -99,8 +97,6 @@ D:\psx\MPPT\git\App\inc/collect_Conversion.h:

 D:\psx\MPPT\git\Hardware\inc/adc.h:

-D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h:
-
 D:\psx\MPPT\git\Hardware\inc/pwm.h:

 D:\psx\MPPT\git\App\inc/inflash.h:
--- a/obj/App/src/mppt_control.o
+++ b/obj/App/src/mppt_control.o
--- a/obj/App/src/sl_protocol.o
+++ b/obj/App/src/sl_protocol.o
--- a/obj/App/src/subdir.mk
+++ b/obj/App/src/subdir.mk
@ -31,6 +31,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 App/src/%.o: ../App/src/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/App/src/task.d
+++ b/obj/App/src/task.d
@ -34,8 +34,7 @@ App/src/task.o: ../App/src/task.c D:\psx\MPPT\git\App\inc/task.h \
 D:\psx\MPPT\git\Hardware\inc/flash.h \
 D:\psx\MPPT\git\App\inc/sl_protocol.h \
 D:\psx\MPPT\git\App\inc/mppt_control.h D:\psx\MPPT\git\App\inc/inflash.h \
- D:\psx\MPPT\git\App\inc/collect_Conversion.h \
- D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h
+ D:\psx\MPPT\git\App\inc/collect_Conversion.h

 D:\psx\MPPT\git\App\inc/task.h:

@ -122,5 +121,3 @@ D:\psx\MPPT\git\App\inc/mppt_control.h:
 D:\psx\MPPT\git\App\inc/inflash.h:

 D:\psx\MPPT\git\App\inc/collect_Conversion.h:
-
-D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h:
--- a/obj/App/src/task.o
+++ b/obj/App/src/task.o
--- a/obj/App/src/uart_dev.o
+++ b/obj/App/src/uart_dev.o
--- a/obj/Core/subdir.mk
+++ b/obj/Core/subdir.mk
@ -16,6 +16,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 Core/%.o: ../Core/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/Debug/subdir.mk
+++ b/obj/Debug/subdir.mk
@ -16,6 +16,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 Debug/%.o: ../Debug/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/Drivers/RingQueue/subdir.mk
+++ b/obj/Drivers/RingQueue/subdir.mk
@ -16,6 +16,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 Drivers/RingQueue/%.o: ../Drivers/RingQueue/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/Drivers/RingQueue2/ring_queue2.d
+++ b/obj/Drivers/RingQueue2/ring_queue2.d
@ -1,4 +0,0 @@
-Drivers/RingQueue2/ring_queue2.o: ../Drivers/RingQueue2/ring_queue2.c \
- ../Drivers/RingQueue2/ring_queue2.h
-
-../Drivers/RingQueue2/ring_queue2.h:
--- a/obj/Drivers/RingQueue2/ring_queue2.o
+++ b/obj/Drivers/RingQueue2/ring_queue2.o
--- a/obj/Drivers/RingQueue2/subdir.mk
+++ b/obj/Drivers/RingQueue2/subdir.mk
@ -1,21 +0,0 @@
-################################################################################
-# MRS Version: 1.9.0
-# 自动生成的文件。不要编辑！
-################################################################################
-
-# Add inputs and outputs from these tool invocations to the build variables 
-C_SRCS += \
-../Drivers/RingQueue2/ring_queue2.c 
-
-OBJS += \
-./Drivers/RingQueue2/ring_queue2.o 
-
-C_DEPS += \
-./Drivers/RingQueue2/ring_queue2.d 
-
-
-# Each subdirectory must supply rules for building sources it contributes
-Drivers/RingQueue2/%.o: ../Drivers/RingQueue2/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
-	@	@
-
--- a/obj/Drivers/TimeSliceOffset/subdir.mk
+++ b/obj/Drivers/TimeSliceOffset/subdir.mk
@ -16,6 +16,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 Drivers/TimeSliceOffset/%.o: ../Drivers/TimeSliceOffset/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/Hardware/src/adc.o
+++ b/obj/Hardware/src/adc.o
--- a/obj/Hardware/src/gpio.o
+++ b/obj/Hardware/src/gpio.o
--- a/obj/Hardware/src/pwm.o
+++ b/obj/Hardware/src/pwm.o
--- a/obj/Hardware/src/subdir.mk
+++ b/obj/Hardware/src/subdir.mk
@ -31,6 +31,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 Hardware/src/%.o: ../Hardware/src/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/Hardware/src/tim.d
+++ b/obj/Hardware/src/tim.d
@ -31,11 +31,7 @@ Hardware/src/tim.o: ../Hardware/src/tim.c \
 D:\psx\MPPT\git\Drivers\RingQueue/ring_queue.h \
 D:\psx\MPPT\git\Hardware\inc/rs485.h D:\psx\MPPT\git\Hardware\inc/pwm.h \
 D:\psx\MPPT\git\App\inc/mppt_control.h D:\psx\MPPT\git\App\inc/task.h \
- D:\psx\MPPT\git\App\inc/uart_dev.h \
- D:\psx\MPPT\git\App\inc/collect_Conversion.h \
- D:\psx\MPPT\git\Hardware\inc/adc.h \
- D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h \
- D:\psx\MPPT\git\App\inc/sl_protocol.h
+ D:\psx\MPPT\git\App\inc/uart_dev.h

 D:\psx\MPPT\git\Hardware\inc/tim.h:

@ -110,11 +106,3 @@ D:\psx\MPPT\git\App\inc/mppt_control.h:
 D:\psx\MPPT\git\App\inc/task.h:

 D:\psx\MPPT\git\App\inc/uart_dev.h:
-
-D:\psx\MPPT\git\App\inc/collect_Conversion.h:
-
-D:\psx\MPPT\git\Hardware\inc/adc.h:
-
-D:\psx\MPPT\git\Drivers\RingQueue2/ring_queue2.h:
-
-D:\psx\MPPT\git\App\inc/sl_protocol.h:
--- a/obj/Hardware/src/tim.o
+++ b/obj/Hardware/src/tim.o
--- a/obj/Peripheral/src/subdir.mk
+++ b/obj/Peripheral/src/subdir.mk
@ -76,6 +76,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 Peripheral/src/%.o: ../Peripheral/src/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/User/main.o
+++ b/obj/User/main.o
--- a/obj/User/subdir.mk
+++ b/obj/User/subdir.mk
@ -22,6 +22,6 @@ C_DEPS += \

 # Each subdirectory must supply rules for building sources it contributes
 User/%.o: ../User/%.c
-	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -I"D:\psx\MPPT\git\Drivers\RingQueue2" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
+	@	@	riscv-none-embed-gcc -march=rv32imacxw -mabi=ilp32 -msmall-data-limit=8 -msave-restore -Os -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -fno-common -Wunused -Wuninitialized  -g -I"D:\psx\MPPT\git\Debug" -I"D:\psx\MPPT\git\Core" -I"D:\psx\MPPT\git\User" -I"D:\psx\MPPT\git\Peripheral\inc" -I"D:\psx\MPPT\git\App\inc" -I"D:\psx\MPPT\git\Hardware\inc" -I"D:\psx\MPPT\git\Drivers\RingQueue" -I"D:\psx\MPPT\git\Drivers\TimeSliceOffset" -std=gnu99 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@)" -c -o "$@" "$<"
 	@	@

--- a/obj/makefile
+++ b/obj/makefile
@ -14,7 +14,6 @@ RM := rm -rf
 -include Peripheral/src/subdir.mk
 -include Hardware/src/subdir.mk
 -include Drivers/TimeSliceOffset/subdir.mk
-include Drivers/RingQueue2/subdir.mk
 -include Drivers/RingQueue/subdir.mk
 -include Debug/subdir.mk
 -include Core/subdir.mk
@ -69,17 +68,12 @@ mppt_Nos_V0.4.lst: mppt_Nos_V0.4.elf
 mppt_Nos_V0.4.siz: mppt_Nos_V0.4.elf
 	@	riscv-none-embed-size --format=berkeley "mppt_Nos_V0.4.elf"
 	@	@
-	$(MAKE) --no-print-directory post-build
-
 # ÆäËûÄ¿±ê
 clean:
 	-$(RM) $(ASM_UPPER_DEPS)$(OBJS)$(SECONDARY_FLASH)$(SECONDARY_LIST)$(SECONDARY_SIZE)$(ASM_DEPS)$(S_DEPS)$(S_UPPER_DEPS)$(C_DEPS) mppt_Nos_V0.4.elf
 	-@
-post-build:
-	-riscv-none-embed-objcopy -O binary "mppt_Nos_V0.4.elf"  "mppt_Nos_V0.4.bin"
-	-@
 secondary-outputs: $(SECONDARY_FLASH) $(SECONDARY_LIST) $(SECONDARY_SIZE)

-.PHONY: all clean dependents post-build
+.PHONY: all clean dependents

 -include ../makefile.targets
--- a/obj/mppt_Nos_V0.4.bin
+++ b/obj/mppt_Nos_V0.4.bin
--- a/obj/mppt_Nos_V0.4.elf
+++ b/obj/mppt_Nos_V0.4.elf
--- a/obj/mppt_Nos_V0.4.hex
+++ b/obj/mppt_Nos_V0.4.hex
--- a/obj/mppt_Nos_V0.4.lst
+++ b/obj/mppt_Nos_V0.4.lst
--- a/obj/mppt_Nos_V0.4.map
+++ b/obj/mppt_Nos_V0.4.map
--- a/obj/mppt_Nos_V0.4.mem
+++ b/obj/mppt_Nos_V0.4.mem
@ -1,326 +0,0 @@
-.text
-	|	0x00000140	|	__riscv_save_12                       	|	FUNC  	|	0x30
-	|	0x00000148	|	__riscv_save_8                        	|	FUNC  	|	0x28
-	|	0x00000156	|	__riscv_save_7                        	|	FUNC  	|	0x1a
-	|	0x00000170	|	__riscv_save_1                        	|	FUNC  	|	0xc
-	|	0x0000017c	|	__riscv_restore_12                    	|	FUNC  	|	0x24
-	|	0x00000180	|	__riscv_restore_10                    	|	FUNC  	|	0x20
-	|	0x0000018a	|	__riscv_restore_5                     	|	FUNC  	|	0x16
-	|	0x00000194	|	__riscv_restore_3                     	|	FUNC  	|	0xc
-	|	0x000001a0	|	memset                                	|	FUNC  	|	0xa8
-	|	0x00000248	|	NMI_Handler                           	|	FUNC  	|	0x2
-	|	0x0000024a	|	HardFault_Handler                     	|	FUNC  	|	0x2
-	|	0x0000024c	|	main                                  	|	FUNC  	|	0x4a
-	|	0x00000296	|	SystemInit                            	|	FUNC  	|	0x106
-	|	0x0000039c	|	SystemCoreClockUpdate                 	|	FUNC  	|	0xa4
-	|	0x000004c8	|	ADC_DeInit                            	|	FUNC  	|	0x28
-	|	0x000004f0	|	ADC_Init                              	|	FUNC  	|	0x56
-	|	0x00000546	|	ADC_Cmd                               	|	FUNC  	|	0x10
-	|	0x00000556	|	ADC_ResetCalibration                  	|	FUNC  	|	0xa
-	|	0x00000560	|	ADC_GetResetCalibrationStatus         	|	FUNC  	|	0x8
-	|	0x00000568	|	ADC_StartCalibration                  	|	FUNC  	|	0xa
-	|	0x00000572	|	ADC_GetCalibrationStatus              	|	FUNC  	|	0x8
-	|	0x0000057a	|	ADC_SoftwareStartConvCmd              	|	FUNC  	|	0x18
-	|	0x00000592	|	ADC_RegularChannelConfig              	|	FUNC  	|	0xb8
-	|	0x0000064a	|	ADC_GetConversionValue                	|	FUNC  	|	0x8
-	|	0x00000652	|	ADC_GetFlagStatus                     	|	FUNC  	|	0xa
-	|	0x0000065c	|	ADC_BufferCmd                         	|	FUNC  	|	0x18
-	|	0x00000674	|	ADC_DutyDelayCmd                      	|	FUNC  	|	0x12
-	|	0x00000686	|	ADC_FIFO_Cmd                          	|	FUNC  	|	0x12
-	|	0x00000698	|	ADC_Sample_ModeConfig                 	|	FUNC  	|	0x10
-	|	0x000006a8	|	Get_CalibrationValue                  	|	FUNC  	|	0x1d4
-	|	0x0000087c	|	DBGMCU_GetCHIPID                      	|	FUNC  	|	0x6
-	|	0x00000882	|	EXTI_Init                             	|	FUNC  	|	0x6a
-	|	0x000008ec	|	EXTI_GetITStatus                      	|	FUNC  	|	0x1e
-	|	0x0000090a	|	EXTI_ClearITPendingBit                	|	FUNC  	|	0xa
-	|	0x00000914	|	GPIO_Init                             	|	FUNC  	|	0xc0
-	|	0x000009d4	|	GPIO_ReadInputDataBit                 	|	FUNC  	|	0xa
-	|	0x000009de	|	GPIO_ReadOutputDataBit                	|	FUNC  	|	0xa
-	|	0x000009e8	|	GPIO_SetBits                          	|	FUNC  	|	0x4
-	|	0x000009ec	|	GPIO_WriteBit                         	|	FUNC  	|	0xa
-	|	0x000009f6	|	GPIO_PinRemapConfig                   	|	FUNC  	|	0x12c
-	|	0x00000b22	|	GPIO_EXTILineConfig                   	|	FUNC  	|	0x2c
-	|	0x00000b4e	|	GPIO_IPD_Unused                       	|	FUNC  	|	0x190
-	|	0x00000cde	|	NVIC_PriorityGroupConfig              	|	FUNC  	|	0x6
-	|	0x00000ce4	|	NVIC_Init                             	|	FUNC  	|	0x54
-	|	0x00000d38	|	RCC_ADCCLKConfig                      	|	FUNC  	|	0x14
-	|	0x00000d4c	|	RCC_GetClocksFreq                     	|	FUNC  	|	0xd6
-	|	0x00000e22	|	RCC_PB2PeriphClockCmd                 	|	FUNC  	|	0x1e
-	|	0x00000e40	|	RCC_PB1PeriphClockCmd                 	|	FUNC  	|	0x1e
-	|	0x00000e5e	|	RCC_PB2PeriphResetCmd                 	|	FUNC  	|	0x1e
-	|	0x00000e7c	|	SPI_Init                              	|	FUNC  	|	0x32
-	|	0x00000eae	|	SPI_Cmd                               	|	FUNC  	|	0x1a
-	|	0x00000ec8	|	SPI_I2S_SendData                      	|	FUNC  	|	0x4
-	|	0x00000ecc	|	SPI_I2S_ReceiveData                   	|	FUNC  	|	0x4
-	|	0x00000ed0	|	SPI_I2S_GetFlagStatus                 	|	FUNC  	|	0xa
-	|	0x00000eda	|	TIM_TimeBaseInit                      	|	FUNC  	|	0x76
-	|	0x00000f50	|	TIM_OC4Init                           	|	FUNC  	|	0x7c
-	|	0x00000fcc	|	TIM_Cmd                               	|	FUNC  	|	0x18
-	|	0x00000fe4	|	TIM_CtrlPWMOutputs                    	|	FUNC  	|	0x16
-	|	0x00000ffa	|	TIM_ITConfig                          	|	FUNC  	|	0x12
-	|	0x0000100c	|	TIM_ARRPreloadConfig                  	|	FUNC  	|	0x1a
-	|	0x00001026	|	TIM_OC4PreloadConfig                  	|	FUNC  	|	0x16
-	|	0x0000103c	|	TIM_SetCompare4                       	|	FUNC  	|	0x16
-	|	0x00001052	|	TIM_GetCounter                        	|	FUNC  	|	0x18
-	|	0x0000106a	|	TIM_GetITStatus                       	|	FUNC  	|	0x18
-	|	0x00001082	|	TIM_ClearITPendingBit                 	|	FUNC  	|	0xc
-	|	0x0000108e	|	USART_Init                            	|	FUNC  	|	0xba
-	|	0x00001148	|	USART_Cmd                             	|	FUNC  	|	0x16
-	|	0x0000115e	|	USART_ITConfig                        	|	FUNC  	|	0x36
-	|	0x00001194	|	USART_SendData                        	|	FUNC  	|	0x8
-	|	0x0000119c	|	USART_ReceiveData                     	|	FUNC  	|	0x8
-	|	0x000011a4	|	USART_GetFlagStatus                   	|	FUNC  	|	0xa
-	|	0x000011ae	|	USART_GetITStatus                     	|	FUNC  	|	0x3c
-	|	0x000011ea	|	ADC_all_Init                          	|	FUNC  	|	0xf0
-	|	0x000012da	|	SPI_Flash_Init                        	|	FUNC  	|	0xa4
-	|	0x0000137e	|	SPI_ReadWriteByte                     	|	FUNC  	|	0x5a
-	|	0x000013d8	|	SPI_Flash_Read                        	|	FUNC  	|	0x68
-	|	0x00001440	|	RUN_LED_Init                          	|	FUNC  	|	0x2e
-	|	0x0000146e	|	WDI_INPUT_Init                        	|	FUNC  	|	0x32
-	|	0x000014a0	|	POW_OUT_CON_Init                      	|	FUNC  	|	0x3e
-	|	0x000014de	|	DSG_PROT_Init                         	|	FUNC  	|	0x5a
-	|	0x00001538	|	EXTI2_IRQHandler                      	|	FUNC  	|	0x5e
-	|	0x00001596	|	EXTI1_IRQHandler                      	|	FUNC  	|	0x1c
-	|	0x000015b2	|	PWM_GPIO_Configuration                	|	FUNC  	|	0x48
-	|	0x000015fa	|	PWM_TIM_Configuration                 	|	FUNC  	|	0x6c
-	|	0x00001666	|	Set_duty_ratio                        	|	FUNC  	|	0x86
-	|	0x000016ec	|	GW_485_Init                           	|	FUNC  	|	0xb2
-	|	0x0000179e	|	BAT_485_Init                          	|	FUNC  	|	0xbe
-	|	0x0000185c	|	USARTx_SendByte                       	|	FUNC  	|	0x1a
-	|	0x00001876	|	USART3_IRQHandler                     	|	FUNC  	|	0x46
-	|	0x000018bc	|	USART4_IRQHandler                     	|	FUNC  	|	0x46
-	|	0x00001902	|	TIM3_Int_Init                         	|	FUNC  	|	0x52
-	|	0x00001954	|	TIM3_Init                             	|	FUNC  	|	0x28
-	|	0x0000197c	|	TIM3_IRQHandler                       	|	FUNC  	|	0x2a
-	|	0x000019a6	|	TIM2_Int_Init                         	|	FUNC  	|	0x58
-	|	0x000019fe	|	TIM2_Init                             	|	FUNC  	|	0x2e
-	|	0x00001a2c	|	TIM2_IRQHandler                       	|	FUNC  	|	0x2a
-	|	0x00001a56	|	SysTick_Handler                       	|	FUNC  	|	0xe
-	|	0x00001a64	|	TIM1_UP_IRQHandler                    	|	FUNC  	|	0x32
-	|	0x00001a96	|	TimeSliceOffset_Register              	|	FUNC  	|	0x3e
-	|	0x00001ad4	|	TimeSliceOffset_Unregister            	|	FUNC  	|	0x2e
-	|	0x00001b02	|	TimeSliceOffset_Start                 	|	FUNC  	|	0x22
-	|	0x00001b24	|	TimeSliceOffset_Produce               	|	FUNC  	|	0x28
-	|	0x00001b4c	|	InitRingQueue                         	|	FUNC  	|	0x10
-	|	0x00001b5c	|	InRingQueue                           	|	FUNC  	|	0x2c
-	|	0x00001b88	|	OutRingQueue                          	|	FUNC  	|	0x26
-	|	0x00001bae	|	RingQueueLength                       	|	FUNC  	|	0x10
-	|	0x00001bbe	|	Delay_Init                            	|	FUNC  	|	0x20
-	|	0x00001bde	|	Delay_Ms                              	|	FUNC  	|	0x36
-	|	0x00001c14	|	USART_Printf_Init                     	|	FUNC  	|	0x5a
-	|	0x00001c6e	|	_write                                	|	FUNC  	|	0x3e
-	|	0x00001cac	|	_sbrk                                 	|	FUNC  	|	0x26
-	|	0x00001cd2	|	Get_ConversionVal                     	|	FUNC  	|	0x2a
-	|	0x00001cfc	|	middleAverageFilter                   	|	FUNC  	|	0x92
-	|	0x00001d8e	|	get_CHG_CURR                          	|	FUNC  	|	0x44
-	|	0x00001dd2	|	get_PV_VOLT_OUT                       	|	FUNC  	|	0x44
-	|	0x00001e16	|	get_DSG_CURR                          	|	FUNC  	|	0x44
-	|	0x00001e5a	|	get_PV1_VOLT_IN                       	|	FUNC  	|	0x44
-	|	0x00001e9e	|	get_MOSFET_Temper                     	|	FUNC  	|	0x56
-	|	0x00001ef4	|	read_config_info                      	|	FUNC  	|	0x86
-	|	0x00001f7a	|	mppt_constantVoltage                  	|	FUNC  	|	0x66
-	|	0x00001fe0	|	mppt_constantVoltageO                 	|	FUNC  	|	0x62
-	|	0x00002042	|	mppt_constantCurrentO                 	|	FUNC  	|	0x62
-	|	0x000020a4	|	MpptContorl                           	|	FUNC  	|	0xe8
-	|	0x0000218c	|	MpptMode                              	|	FUNC  	|	0x2da
-	|	0x00002466	|	test                                  	|	FUNC  	|	0x188
-	|	0x000025ee	|	SL_ReadRegisterMPPTMode               	|	FUNC  	|	0x2a
-	|	0x00002618	|	SL_ReadRegisterDischargMosState       	|	FUNC  	|	0x24
-	|	0x0000263c	|	SL_ReadRegisterHighSideMosTemperature 	|	FUNC  	|	0x3e
-	|	0x0000267a	|	SL_ReadRegisterSolarOpenCircuitVoltage	|	FUNC  	|	0x3e
-	|	0x000026b8	|	SL_ReadRegisterDischargCurrent        	|	FUNC  	|	0x3c
-	|	0x000026f4	|	SL_ReadRegisterChargCurrent           	|	FUNC  	|	0x3c
-	|	0x00002730	|	SL_ReadRegisterBatteryVoltage         	|	FUNC  	|	0x3c
-	|	0x0000276c	|	SL_MsgProcFunc_Registration_request   	|	FUNC  	|	0x54
-	|	0x000027c0	|	SL_MsgProcFunc_Broadcast_Scan         	|	FUNC  	|	0x34
-	|	0x000027f4	|	SL_MsgProcFunc_Write_Register         	|	FUNC  	|	0x56
-	|	0x0000284a	|	CheckFunc                             	|	FUNC  	|	0x3e
-	|	0x00002888	|	randomDelay                           	|	FUNC  	|	0x2c
-	|	0x000028b4	|	Check_485_bus_busy                    	|	FUNC  	|	0x7a
-	|	0x0000292e	|	SL_MsgProcFunc_Remote_Upgrade         	|	FUNC  	|	0x9e
-	|	0x000029cc	|	SL_MsgProcFunc_Update_Profile         	|	FUNC  	|	0x9e
-	|	0x00002a6a	|	SL_MsgProcFunc_Read_Register          	|	FUNC  	|	0x18c
-	|	0x00002bf6	|	FRT_MsgHandler                        	|	FUNC  	|	0x32
-	|	0x00002c28	|	read_and_process_uart_data            	|	FUNC  	|	0x2ca
-	|	0x00002ef2	|	Task_wdi                              	|	FUNC  	|	0x52
-	|	0x00002f44	|	Task_RunLED                           	|	FUNC  	|	0x326
-	|	0x0000326a	|	Task_usart                            	|	FUNC  	|	0x10
-	|	0x0000327a	|	Task_startMpptControl                 	|	FUNC  	|	0x136
-	|	0x000033b0	|	Task_softStart                        	|	FUNC  	|	0x12a
-	|	0x000034da	|	stop_mpptWork                         	|	FUNC  	|	0x30
-	|	0x0000350a	|	Task_refreshRegister                  	|	FUNC  	|	0x24c
-	|	0x00003756	|	start_mpptWork                        	|	FUNC  	|	0x36
-	|	0x0000378c	|	Task_impedanceCalculation             	|	FUNC  	|	0x17e
-	|	0x0000390a	|	Task_recvbroadcast                    	|	FUNC  	|	0x154
-	|	0x00003a5e	|	Task_sensorEnableBroadcast            	|	FUNC  	|	0x4c
-	|	0x00003aaa	|	g_Mppt_Para_Init                      	|	FUNC  	|	0x176
-	|	0x00003c20	|	task_Init                             	|	FUNC  	|	0x84
-	|	0x00003ca4	|	hardware_Init                         	|	FUNC  	|	0x42
-	|	0x00003ce6	|	uart_putchar                          	|	FUNC  	|	0x46
-	|	0x00003d2c	|	uart_dev_init                         	|	FUNC  	|	0x52
-	|	0x00003d7e	|	bat485_tx_enabla                      	|	FUNC  	|	0x1a
-	|	0x00003d98	|	bat485_tx_disenabla                   	|	FUNC  	|	0x1a
-	|	0x00003db2	|	gw485_tx_enabla                       	|	FUNC  	|	0x18
-	|	0x00003dca	|	gw485_tx_disenabla                    	|	FUNC  	|	0x18
-	|	0x00003de2	|	uart_dev_write                        	|	FUNC  	|	0x62
-	|	0x00003e44	|	uart_dev_char_present                 	|	FUNC  	|	0x18
-	|	0x00003e5c	|	uart_dev_in_char                      	|	FUNC  	|	0x28
-	|	0x00003e84	|	ring_queue_length                     	|	FUNC  	|	0xe
-	|	0x00003e92	|	__adddf3                              	|	FUNC  	|	0x730
-	|	0x000045c2	|	__gtdf2                               	|	FUNC  	|	0xae
-	|	0x00004670	|	__ltdf2                               	|	FUNC  	|	0xb6
-	|	0x00004726	|	__muldf3                              	|	FUNC  	|	0x4b8
-	|	0x00004bde	|	__subdf3                              	|	FUNC  	|	0x73e
-	|	0x0000531c	|	__floatsidf                           	|	FUNC  	|	0x72
-	|	0x0000538e	|	__addsf3                              	|	FUNC  	|	0x36a
-	|	0x000056f8	|	__divsf3                              	|	FUNC  	|	0x2b2
-	|	0x000059aa	|	__nesf2                               	|	FUNC  	|	0x5c
-	|	0x00005a06	|	__gtsf2                               	|	FUNC  	|	0x86
-	|	0x00005a8c	|	__lesf2                               	|	FUNC  	|	0x8c
-	|	0x00005b18	|	__mulsf3                              	|	FUNC  	|	0x294
-	|	0x00005dac	|	__subsf3                              	|	FUNC  	|	0x388
-	|	0x00006134	|	__fixsfsi                             	|	FUNC  	|	0x62
-	|	0x00006196	|	__fixunssfsi                          	|	FUNC  	|	0x56
-	|	0x000061ec	|	__floatsisf                           	|	FUNC  	|	0xc6
-	|	0x000062b2	|	__floatunsisf                         	|	FUNC  	|	0xce
-	|	0x00006380	|	__extendsfdf2                         	|	FUNC  	|	0xac
-	|	0x0000642c	|	__truncdfsf2                          	|	FUNC  	|	0x16a
-	|	0x00006596	|	__clzsi2                              	|	FUNC  	|	0x6e
-	|	0x00006604	|	memcpy                                	|	FUNC  	|	0xb2
-	|	0x000066b6	|	printf                                	|	FUNC  	|	0x40
-	|	0x000066f6	|	_puts_r                               	|	FUNC  	|	0xd4
-	|	0x000067ca	|	puts                                  	|	FUNC  	|	0xc
-	|	0x000067d6	|	srand                                 	|	FUNC  	|	0x58
-	|	0x0000682e	|	rand                                  	|	FUNC  	|	0x84
-	|	0x000068b2	|	sprintf                               	|	FUNC  	|	0x46
-	|	0x000068f8	|	__swbuf_r                             	|	FUNC  	|	0xbc
-	|	0x000069b4	|	__swsetup_r                           	|	FUNC  	|	0xfc
-	|	0x00006ab0	|	__sflush_r                            	|	FUNC  	|	0x130
-	|	0x00006be0	|	_fflush_r                             	|	FUNC  	|	0x66
-	|	0x00006c46	|	std                                   	|	FUNC  	|	0x66
-	|	0x00006cac	|	_cleanup_r                            	|	FUNC  	|	0xa
-	|	0x00006cb6	|	__sfmoreglue                          	|	FUNC  	|	0x46
-	|	0x00006cfc	|	__sinit                               	|	FUNC  	|	0x6c
-	|	0x00006d68	|	__sfp                                 	|	FUNC  	|	0xa0
-	|	0x00006e08	|	_fwalk_reent                          	|	FUNC  	|	0x6a
-	|	0x00006e72	|	__swhatbuf_r                          	|	FUNC  	|	0x58
-	|	0x00006eca	|	__smakebuf_r                          	|	FUNC  	|	0x92
-	|	0x00006f5c	|	malloc                                	|	FUNC  	|	0xa
-	|	0x00006f66	|	_free_r                               	|	FUNC  	|	0xa8
-	|	0x0000700e	|	_malloc_r                             	|	FUNC  	|	0xda
-	|	0x000070e8	|	__ssputs_r                            	|	FUNC  	|	0xe4
-	|	0x000071cc	|	_svfprintf_r                          	|	FUNC  	|	0x26a
-	|	0x00007436	|	__sfputc_r                            	|	FUNC  	|	0x28
-	|	0x0000745e	|	__sfputs_r                            	|	FUNC  	|	0x42
-	|	0x000074a0	|	_vfiprintf_r                          	|	FUNC  	|	0x288
-	|	0x00007728	|	_printf_common                        	|	FUNC  	|	0x10c
-	|	0x00007834	|	_printf_i                             	|	FUNC  	|	0x2a2
-	|	0x00007ad6	|	_sbrk_r                               	|	FUNC  	|	0x2a
-	|	0x00007b00	|	__sread                               	|	FUNC  	|	0x2c
-	|	0x00007b2c	|	__swrite                              	|	FUNC  	|	0x48
-	|	0x00007b74	|	__sseek                               	|	FUNC  	|	0x30
-	|	0x00007ba4	|	__sclose                              	|	FUNC  	|	0x6
-	|	0x00007baa	|	_write_r                              	|	FUNC  	|	0x2e
-	|	0x00007bd8	|	_close_r                              	|	FUNC  	|	0x28
-	|	0x00007c00	|	_fstat_r                              	|	FUNC  	|	0x2a
-	|	0x00007c2a	|	_isatty_r                             	|	FUNC  	|	0x28
-	|	0x00007c52	|	_lseek_r                              	|	FUNC  	|	0x2c
-	|	0x00007c7e	|	memchr                                	|	FUNC  	|	0x18
-	|	0x00007c96	|	memmove                               	|	FUNC  	|	0x46
-	|	0x00007cdc	|	__malloc_lock                         	|	FUNC  	|	0x2
-	|	0x00007cde	|	__malloc_unlock                       	|	FUNC  	|	0x2
-	|	0x00007ce0	|	_realloc_r                            	|	FUNC  	|	0x58
-	|	0x00007d38	|	_read_r                               	|	FUNC  	|	0x2c
-	|	0x00007d64	|	_malloc_usable_size_r                 	|	FUNC  	|	0x14
-	|	0x00007d78	|	_close                                	|	FUNC  	|	0xc
-	|	0x00007d84	|	_fstat                                	|	FUNC  	|	0xc
-	|	0x00007d90	|	_isatty                               	|	FUNC  	|	0xc
-	|	0x00007d9c	|	_lseek                                	|	FUNC  	|	0xc
-	|	0x00007da8	|	_read                                 	|	FUNC  	|	0xc
-	|	0x00007e60	|	mosTemperADC                          	|	OBJECT	|	0x1e2
-	|	0x00008718	|	__clz_tab                             	|	OBJECT	|	0x100
-	|	0x00008818	|	__sf_fake_stderr                      	|	OBJECT	|	0x20
-	|	0x00008838	|	__sf_fake_stdin                       	|	OBJECT	|	0x20
-	|	0x00008858	|	__sf_fake_stdout                      	|	OBJECT	|	0x20
-
-.data
-	|	0x20000000	|	HBPrescTable                          	|	OBJECT	|	0x10
-	|	0x20000010	|	PBHBPrescTable                        	|	OBJECT	|	0x10
-	|	0x20000020	|	g_slConfigInfo                        	|	OBJECT	|	0x2c
-	|	0x2000004c	|	defaultValue                          	|	OBJECT	|	0xe
-	|	0x2000005c	|	g_MsgTbl                              	|	OBJECT	|	0x30
-	|	0x2000008c	|	g_RegTblR                             	|	OBJECT	|	0x38
-	|	0x200000c4	|	uart_devices                          	|	OBJECT	|	0x38
-	|	0x200000fc	|	impure_data                           	|	OBJECT	|	0x60
-	|	0x20000160	|	SystemCoreClock                       	|	OBJECT	|	0x4
-	|	0x20000164	|	ADCPrescTable                         	|	OBJECT	|	0x4
-	|	0x20000168	|	curbrk.5007                           	|	OBJECT	|	0x4
-	|	0x2000016c	|	g_duty_ratio                          	|	OBJECT	|	0x4
-	|	0x20000170	|	onlyOnce.5797                         	|	OBJECT	|	0x1
-	|	0x20000171	|	onlyOnce.5805                         	|	OBJECT	|	0x1
-	|	0x20000172	|	onlyOnce.5810                         	|	OBJECT	|	0x1
-	|	0x20000173	|	only_once.5830                        	|	OBJECT	|	0x1
-	|	0x20000174	|	only_once.6423                        	|	OBJECT	|	0x1
-	|	0x20000175	|	run_Broadcast                         	|	OBJECT	|	0x1
-	|	0x20000178	|	_impure_ptr                           	|	OBJECT	|	0x4
-	|	0x2000017c	|	_global_impure_ptr                    	|	OBJECT	|	0x4
-
-.bss
-	|	0x20000180	|	ADC_Trim                              	|	OBJECT	|	0x2
-	|	0x20000184	|	CHIPID                                	|	OBJECT	|	0x4
-	|	0x20000188	|	OPA_Trim                              	|	OBJECT	|	0x4
-	|	0x2000018c	|	TS_Val                                	|	OBJECT	|	0x4
-	|	0x20000190	|	NVIC_Priority_Group                   	|	OBJECT	|	0x4
-	|	0x20000194	|	Calibrattion_Val                      	|	OBJECT	|	0x2
-	|	0x20000198	|	USART3_Rbuffer                        	|	OBJECT	|	0x1
-	|	0x2000019c	|	USART4_Rbuffer                        	|	OBJECT	|	0x1
-	|	0x200001a0	|	pTimeSliceList                        	|	OBJECT	|	0x4
-	|	0x200001a4	|	p_ms                                  	|	OBJECT	|	0x2
-	|	0x200001a6	|	p_us                                  	|	OBJECT	|	0x2
-	|	0x200001a8	|	ConstantCurrentV.5826                 	|	OBJECT	|	0x4
-	|	0x200001ac	|	ConstantVoltageChargeV.5804           	|	OBJECT	|	0x4
-	|	0x200001b0	|	ConstantVoltageV.5827                 	|	OBJECT	|	0x4
-	|	0x200001b4	|	FloatChargeV.5809                     	|	OBJECT	|	0x4
-	|	0x200001b8	|	FloatI.5828                           	|	OBJECT	|	0x4
-	|	0x200001bc	|	StopSolarOpenCircuitV.5829            	|	OBJECT	|	0x4
-	|	0x200001c0	|	TrickleChargeC.5796                   	|	OBJECT	|	0x4
-	|	0x200001c4	|	RegistrationRequestFlag               	|	OBJECT	|	0x1
-	|	0x200001c6	|	checkRegisterRefreshTimeFlag.6446     	|	OBJECT	|	0x2
-	|	0x200001c8	|	checkSolarOpenCircuitVTimeFlag.6422   	|	OBJECT	|	0x2
-	|	0x200001cc	|	currOne.6468                          	|	OBJECT	|	0x4
-	|	0x200001d0	|	currTwo.6470                          	|	OBJECT	|	0x4
-	|	0x200001d4	|	dutyRatio.6430                        	|	OBJECT	|	0x4
-	|	0x200001d8	|	enabBroadcastTimeFlag.6482            	|	OBJECT	|	0x4
-	|	0x200001dc	|	flag.6417                             	|	OBJECT	|	0x1
-	|	0x200001dd	|	g_batteryState                        	|	OBJECT	|	0x1
-	|	0x200001e0	|	g_impedance                           	|	OBJECT	|	0x4
-	|	0x200001e4	|	g_recvBroadcastDevice                 	|	OBJECT	|	0x4
-	|	0x200001e8	|	g_recvBroadcastRegisterNumber         	|	OBJECT	|	0x1
-	|	0x200001ea	|	num.6429                              	|	OBJECT	|	0x2
-	|	0x200001ec	|	num.6467                              	|	OBJECT	|	0x1
-	|	0x200001ed	|	outputAgainFlag                       	|	OBJECT	|	0x1
-	|	0x200001ee	|	overTemperature                       	|	OBJECT	|	0x1
-	|	0x200001ef	|	recvbroadcast_flag                    	|	OBJECT	|	0x1
-	|	0x200001f0	|	run_number.6454                       	|	OBJECT	|	0x1
-	|	0x200001f4	|	temp.6440                             	|	OBJECT	|	0x4
-	|	0x200001f8	|	voltOne.6469                          	|	OBJECT	|	0x4
-	|	0x200001fc	|	voltTwo.6471                          	|	OBJECT	|	0x4
-	|	0x20000200	|	g_bat485_uart3_handle                 	|	OBJECT	|	0x4
-	|	0x20000204	|	g_gw485_uart4_handle                  	|	OBJECT	|	0x4
-	|	0x20000208	|	__malloc_free_list                    	|	OBJECT	|	0x4
-	|	0x2000020c	|	__malloc_sbrk_start                   	|	OBJECT	|	0x4
-	|	0x20000210	|	g_Mppt_Para                           	|	OBJECT	|	0x2d
-	|	0x20000240	|	rs485_buff                            	|	OBJECT	|	0x32
-	|	0x20000274	|	m_impedanceCalculation                	|	OBJECT	|	0x10
-	|	0x20000284	|	m_recvbroadcast                       	|	OBJECT	|	0x10
-	|	0x20000294	|	m_refreshRegister                     	|	OBJECT	|	0x10
-	|	0x200002a4	|	m_runled                              	|	OBJECT	|	0x10
-	|	0x200002b4	|	m_sensorEnableBroadcast               	|	OBJECT	|	0x10
-	|	0x200002c4	|	m_softStart                           	|	OBJECT	|	0x10
-	|	0x200002d4	|	m_startMpptControl                    	|	OBJECT	|	0x10
-	|	0x200002e4	|	m_usart                               	|	OBJECT	|	0x10
-	|	0x200002f4	|	m_wdi                                 	|	OBJECT	|	0x10
-	|	0x20000304	|	bat485_in_buff                        	|	OBJECT	|	0xc8
-	|	0x200003cc	|	gw485_in_buff                         	|	OBJECT	|	0x12c
-	|	0x200004f8	|	errno                                 	|	OBJECT	|	0x4
-
--- a/obj/sources.mk
+++ b/obj/sources.mk
@ -27,7 +27,6 @@ App/src \
 Core \
 Debug \
 Drivers/RingQueue \
-Drivers/RingQueue2 \
 Drivers/TimeSliceOffset \
 Hardware/src \
 Peripheral/src \