mppt/Hardware/inc/flash.h

91 lines
2.2 KiB
C

/*
* Flash.h
*
* Created on: 2024年5月16日
* Author: 34509
*/
#ifndef HARDWARE_SPI_FLASH_H_
#define HARDWARE_SPI_FLASH_H_
#include "ch32l103.h"
/*****************************************
*@Note
Winbond W25Qxx SPIFLASH
pins:
CS —— PB12(SPI2_NSS)
DO —— PB14(SPI2_MISO)
WP —— 3.3V
DI —— PB15(SPI2_MOSI)
CLK —— PB13(SPI2_SCK)
HOLD —— 3.3V
*******************************************/
#define RCC_APB2Periph_GPIOX RCC_PB2Periph_GPIOB
#define RCC_APB1Periph_SPIX RCC_PB1Periph_SPI2
#define CS_PIN GPIO_Pin_12
#define CS_GPIO GPIOB
#define DO_PIN GPIO_Pin_14
#define DO_GPIO GPIOB
#define DI_PIN GPIO_Pin_15
#define DI_GPIO GPIOB
#define CLK_PIN GPIO_Pin_13
#define CLK_GPIO GPIOB
#define SPIX SPI2
/* Winbond SPI Falsh ID */
#define W25Q80 0XEF13
#define W25Q16 0XEF14
#define W25Q32 0XEF15
#define W25Q64 0XEF16
#define W25Q128 0XEF17
/* Winbond SPIFalsh Instruction List 指令表 */
#define W25X_WriteEnable 0x06
#define W25X_WriteDisable 0x04
#define W25X_ReadStatusReg 0x05
#define W25X_WriteStatusReg 0x01
#define W25X_ReadData 0x03
#define W25X_FastReadData 0x0B
#define W25X_FastReadDual 0x3B
#define W25X_PageProgram 0x02
#define W25X_BlockErase 0xD8
#define W25X_SectorErase 0x20
#define W25X_ChipErase 0xC7
#define W25X_PowerDown 0xB9
#define W25X_ReleasePowerDown 0xAB
#define W25X_DeviceID 0xAB
#define W25X_ManufactDeviceID 0x90
#define W25X_JedecDeviceID 0x9F
void SPI_Flash_Init(void);
u8 SPI_ReadWriteByte(u8 TxData);
u8 SPI_Flash_ReadSR(void);
void SPI_FLASH_Write_SR(u8 sr);
void SPI_Flash_Wait_Busy(void);
void SPI_FLASH_Write_Enable(void);
void SPI_FLASH_Write_Disable(void);
u16 SPI_Flash_ReadID(void);
void SPI_Flash_Erase_Sector(u32 Dst_Addr);
void SPI_Flash_Read(u8* pBuffer,u32 ReadAddr,u16 size);
void SPI_Flash_Write_Page(u8* pBuffer,u32 WriteAddr,u16 size);
void SPI_Flash_Write_NoCheck(u8* pBuffer,u32 WriteAddr,u16 size);
void SPI_Flash_Write(u8* pBuffer,u32 WriteAddr,u16 size);
void SPI_Flash_Erase_Chip(void);
void SPI_Flash_PowerDown(void);
void SPI_Flash_WAKEUP(void);
void SPI_Flash_TEST(void);
#endif /* HARDWARE_SPI_FLASH_H_ */